M5Stack ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 1232 UXGA, With Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY

Related posts

Feature

Instruction: IDF development environment, Demo: github.com/m5stack/esp32-cam-demo; Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050; Schematic: https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdf
ESP32 Camera: The ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip so that it can be used with lithium battery (Standard voltage: 3.7V4.2V).
The camera is CMOS camera, field of View is 78,best sensor resolution is 1600 * 1200, maximum rms rate is 15fps SXGA.
OV2640 Sensor 's Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive.
For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups.

Description

ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY

Parameters:
ESP32 Chip:
Dual-core Tensilica LX6 microprocessor
Up to 240MHz clock frequency
520kB internal SRAM
4MB Flash memory
Integrated 802.11 BGN WiFi transceiver
Integrated dual-mode Bluetooth (classic and BLE)
Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL

OV2640 sensor:
Standard SCCB interface, compatible with I2C interface
Output Formats(8-bit):
YUV(422/420)/YCbCr422
RGB565/555
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate
UXGA/SXGA: 15fps
SVGA: 30fps
CIF: 60fps
Scan Mode: Progressive

Camera:
CMOS size: 1/4"
Field of View : 78
best sensor resolution: 1600 * 1200
IO voltage: 1.7V-3.3V
Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core)
Power Consumption: TBD Sleep andlt;20A
Temperature Operation: -30C to 70C
Stable work: 0C to 50C
Maximum rms rate: 15fps SXGA
Sensitivity: 1.3V/(Lux-sec)
Signal to noise ratio: 40 dB
Dynamic range: 50 dB
Scan Mode: Progressive
Electronic exposure: Line 1 to Line 1247
Pixel area: 2.2m x 2.2m
Dark current: 15mV/s at 60C

Package Including:
1 * EESP32 Module Development Board with OV2640 Camera