Best beaglebone camera
If you looking for beaglebone camera then you are right place. We are searching for the best beaglebone camera on the market and analyze these products to provide you the best choice.
If you looking for beaglebone camera then you are right place. We are searching for the best beaglebone camera on the market and analyze these products to provide you the best choice.
Best beaglebone camera
1. Pixy2 Smart Vision Sensor - Object Tracking Camera for Arduino, Raspberry Pi, BeagleBone Black
Feature
Robot vision made easy - press the button to teach Pixy2 an object.New with Pixy2: line following mode and integrated LED light source!
Simplify your programming - receive just the objects you're interested in.
Use whatever controller you want - includes software libraries for Arduino, Raspberry Pi, and BeagleBone Black.
Configuration utility runs on Windows, MacOS and Linux
Description
Pixy2 is the newest version of the popular Pixy (CMUcam5) smart vision sensor for robotics! You can quickly "teach" objects to Pixy2 with the press of a button. It saves you time by only outputting the object data you're interested in. New with Pixy2 are a dedicated line following mode with support for "road signs," as well as an integrated LED light source. A multitude of connection options means you can use Pixy with almost any microcontroller. It connects directly to Arduino with the included cable, and fully supports Raspberry Pi and BeagleBone Black with included software libraries. Also included in the box is a USB cable, and mounting hardware to attach Pixy to your robot creation. The firmware, software and hardware are open source, so you can tweak to your heart's delight. Free tech support is included on the Pixycam wiki!2. Arducam 2MP Camera Shield Evaluation Kit with Mini Camera Shield with OV2640 2 Megapixels Lens and ESP8266 Nano V2 Board
Feature
The evaluation kit is designed for low cost WIFI IoT camera based on ArduCAM-Mini-2MP-V2 and ArduCAM-ESP8266-Nano modules. Users can implement a 2MP WIFI camera using HTTP or Web socket protocol on ESP8266The camera can act as an AP and mobile phone/PC can be connected to the camera directly or act as a Station which connected to the home router
M12 mount or CS mount lens holder with changeable lens options
This kit can take 2MP full resolution JPEG still image, but streaming low resolution low frame rate video due to the limitation of ESP8266
The kit can be USB powered or battery powered with build-in charging circuits. No battery is included, need to buy from local
Description
Name: Arducam 2MP Camera Shield Evaluation KitUser guide: www.uctronics.com/download/Amazon/ArduCAM-M-2MP_ESP8266_Nano_V2_Kit.pdf
Features:
2MP image sensor OV2640, support JPEG
M12 mount or CS mount lens holder with changeable lens options
I2C interface for the sensor configuration
SPI interface for camera commands and data stream
With onboard Lithium battery charger circuit, 3.7/500mA max
Build in SD/TF card socket
Build in micro USB-Serial (CH340g) convertor
Compatible with Arduino IDE
Deep sleep mode
Small form of factor
Packing included:
1pcs Arducam Mini Camera Shield with OV2640 2 Megapixels Lens
1pcs Arducam ESP8266 Nano V2 Board
1pcs Battery power cable
Note: The Battery and SD Card are not included in this package
3. SainSmart Wide Angle Fish-Eye Camera Lenses for Raspberry Pi Arduino
Feature
Omnivision 5647 sensor in a fixed focus module.The module attaches to Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI).
The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard.
The camera supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording also it is supported in the latest version of Raspbian, the Raspberry Pi's preferred operating system.
Description
Specification:- Image Color: Black and White
- Fully Compatible with Both the Model A and Model B Raspberry Pi
- 5 MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Viewing angle: 160 degrees
- Camera angle: Size can be replaced
- Video: Supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 Recording 15-pin MIPI Camera Serial Interface
- Size: Approx. 25 x 24 x 9 mm /0.99 x 0.95 x 0.36 inch
Package Includes:
1 x Wide Angle Fish-Eye Camera Lense Board
Note: Raspberry Pi 3 Model B is NOT included.
4. Arducam ESP8266 UNO Board for Arduino Mini Module Camera Shield Compatible with Arduino UNO R3
Feature
ESP8266 UNO based Arduino board for Arducam mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 boardBuild in ESP8266-12E Module
Interface specially designed for Arducam mini module camera shield with OV2640 2 megapixels lens (ASIN:B012UXNDOY) / OV5642 5 megapixels lens (ASIN:B013JUKZ48), not included
11 digital input/output pins, IO ports are 3.3V tolerant
1 analog input(3.2V max input)
Description
Arducam now released a ESP8266 based Arduino board for Arducam mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. The high light this ESP8266 board is that it well mates with Arducam mini 2MP and 5MP camera modules, supports Lithium battery power supply and recharging and with build in SD card slot. It can be an ideal solution for home security and IoT camera applications.Features:
Build in ESP8266-12E Module
11 digital input/output pins, IO ports are 3.3V tolerant
1 analog input(3.2V max input)
Arducam Mini 2MP/5MP camera interface
Lithium battery recharging 3.7V/500mA max
Building in SD/TF card socket
7-12V power jack input
Build in micro USB-Serial interface
Compatible with Arduino IDE
Note that the SD/TF card CS pin is shared with UART TX signal, so the UART and the SD/TF cant be used at the same time.
Package Including:
1pcs Arducam ESP8266 UNO Board
NOTE:OV2640 Arducam Mini Module Camera Shield is not included
The battery is not included
5. Arducam 2 Megapixels OV2640 1/4" CMOS Sensor Camera Module Adapter Board JPEG OUT
Feature
Maxim resolution 1600 x 1200 UXGA at 15 fpsOutput support for Raw RGB, RGB (RGB565/555),GRB422,YUV (422/420) and YCbCr (4:2:2) formats
Easy intergrate with STM32,FPGA,DSP,Arduino etc.
Supports image sizes:UXGA,SXGA, SVGA,and any size scaling down from SXGA to 40x30
Support real time JPEG compression
Description
The OV2640 CAMERA chip image sensor is a low voltage CMOS device that provides the full functionality of a single-chip UXGA(1632X1232) camera and image processor in a small footprint package. The OV2640 provides full-frame,sub-sampled,scaled or windowed 8-bit/10-bit images in a wide range of formats,controlled through the Serial Camera Control Bus (SCCB) interface.Feature:
Maxim frame rate 30fps at SVGA, 60 fps at CIF
Onboard regulator for DVDD,DOVDD,AVDD, only single 3.3V supply needed
High sensitivity for low-light operation
Low operating voltage for embedded portable apps
Standard SCCB interface
Supports image sizes:UXGA,SXGA, SVGA,and any size scaling down from SXGA to 40x30
VarioPixel method for sub-sampling
Automatic image control functions including Automatic Exposure Control (AEC),Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)
Image quality controls including color saturation,gamma, sharpness (edge enhancement), lens correction, white pixel canceling, noise canceling, and 50/60 Hz luminance detection
Line optical black level output capability
Video or snapshot operation
Zooming,panning,and windowing functions
Internal/external frame aynchronization
Variable frame rate control
Supports LED and flash strobe mode
Supports scaling
Supports compression
Embedded microcontroller
Digital Video Port interface, 3.3V LVTTL compatible
Applications:
Cellular and Camera Phones,Toys,PC Multimedia,Digital Still Cameras
Packing included:
1pcs 2MP OV2640 1/4" CMOS Sensor Adapter Board JPEG OUT
FTP support for datasheets
6. SainSmart Infrared Night Vision Surveillance Camera + 2 Infrared Light For Raspberry Pi Not for Arduino
Feature
Omnivision 5647 sensor in a fixed focus moduleThe module attaches to Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI)
The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard
The camera supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording also it is supported in the latest version of Raspbian, the Raspberry Pi's preferred operating system
Description
Specification:
* Fully Compatible with Both the Model A and Model B Raspberry Pi
* 5 MP Omnivision 5647 Camera Module
* Still Picture Resolution: 2592 x 1944
* Viewing angle: 69.9 degrees
* Camera angle: Size can be replaced
* Video: Supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 Recording 15-pin MIPI Camera Serial Interface
* Size: Approx. 25 x 24 x 9 mm /0.99 x 0.95 x 0.36 inch
* Image Color: Black and White
Package includes:
1 x Infrared Night Vision Surveillance Camera Board
2 x Night Vision Surveillance Sensitive Infrared Light 1W
7. M5Stack ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 1232 UXGA, With Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY
Feature
Instruction: IDF development environment, Demo: github.com/m5stack/esp32-cam-demo; Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050; Schematic: https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfESP32 Camera: The ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip so that it can be used with lithium battery (Standard voltage: 3.7V4.2V).
The camera is CMOS camera, field of View is 78,best sensor resolution is 1600 * 1200, maximum rms rate is 15fps SXGA.
OV2640 Sensor 's Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive.
For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups.
Description
ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIYParameters:
ESP32 Chip:
Dual-core Tensilica LX6 microprocessor
Up to 240MHz clock frequency
520kB internal SRAM
4MB Flash memory
Integrated 802.11 BGN WiFi transceiver
Integrated dual-mode Bluetooth (classic and BLE)
Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL
OV2640 sensor:
Standard SCCB interface, compatible with I2C interface
Output Formats(8-bit):
YUV(422/420)/YCbCr422
RGB565/555
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate
UXGA/SXGA: 15fps
SVGA: 30fps
CIF: 60fps
Scan Mode: Progressive
Camera:
CMOS size: 1/4"
Field of View : 78
best sensor resolution: 1600 * 1200
IO voltage: 1.7V-3.3V
Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core)
Power Consumption: TBD Sleep andlt;20A
Temperature Operation: -30C to 70C
Stable work: 0C to 50C
Maximum rms rate: 15fps SXGA
Sensitivity: 1.3V/(Lux-sec)
Signal to noise ratio: 40 dB
Dynamic range: 50 dB
Scan Mode: Progressive
Electronic exposure: Line 1 to Line 1247
Pixel area: 2.2m x 2.2m
Dark current: 15mV/s at 60C
Package Including:
1 * EESP32 Module Development Board with OV2640 Camera
8. Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens for Arduino UNO Mega2560 Board
Feature
Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms2 megapixels image sensor OV2640
M12 mount or CS mount lens holder with changeable lens options
IR sensitive with proper lens combination
I2C interface for the sensor configurationSPI interface for camera commands and data stream
Description
Arducam-M-2MP is optimized version of Arducam shield Rev.C, and is a high definition 2MP SPI camera, which reduce the complexity of the camera control interface. It integrates 2MP CMOS image sensor OV2640, and provides miniature size, as well as the easy to use hardware interface and open source code library. The Arducam mini can be used in any platforms like Arduino, Raspberry Pi, Maple, Chipkit, Beaglebone black, as long as they have SPI and I2C interface and can be well mated with standard Arduino boards. Arducam mini not only offers the capability to add a camera interface which doesn't have in some low cost microcontrollers, but also provides the capability to add multiple cameras to a single microcontroller.Application:
IoT cameras
Robot cameras
Wildlife cameras
Other battery-powered products
Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
Features:
2 megapixels image sensor OV2640
M12 mount or CS mount lens holder with changeable lens options
IR sensitive with proper lens combination
I2C interface for the sensor configuration
SPI interface for camera commands and data stream
All IO ports are 5V/3.3V tolerant
Support JPEG compression mode, single and multiple shoot mode, one time capture multiple read operation, burst read operation, low power mode and etc.
Well mated with standard Arduino boards
Provide open source code library for Arduino, STM32, Chipkit, Raspberry Pi, BeagleBone Black
Small form of factor
Package Including:
1pcs Arducam Mini module Camera Shield With OV2640 2 megapixels lens for Arduino UNO Mega2560 board
NOTE:Arduino UNO is not incldued
9. TTL Serial Camera With NTSC Video
Feature
TTL Serial JPEG Camera with NTSC Video
This camera module can be a perfect project addi
Description
TTL Serial JPEG Camera with NTSC Video
This camera module can be a perfect project addition. It was designed to be used in security systems and does two main functions; it outputs NTSC video and can take snapshots of that video and transmit th
10. Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module for Arduino UNO Mega2560 Board
Feature
Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module is a general purpose high definition 5MP SPI camera, which reduce the complexity of the camera control interfaceIt integrates 5MP CMOS image sensor OV5642, and provides miniature size, as well as the easy to use hardware interface and open source code library
The Arducam mini can be used in any platforms like Arduino, Raspberry Pi, ESP8266, Maple, Chipkit, Beaglebone black, as long as they have SPI and I2C interface and can be well mated with standard Arduino boards
Support JPEG compression mode, single and multiple shoot mode, short movie recording, one time capture multiple read operation, burst read operation, low power mode and etc.
It can be used in IoT, Robot, Wildlife, HDR and Other battery-powered products or scientific image processing applications
Description
Arducam-Mini-5MP-Plus(OV5642) is performance improved version compared to its predecessor Arducam-M-5MP.Arducam mini not only offers the capability to add a camera interface which doesn't have in some low cost microcontrollers,
but also provides the capability to add multiple cameras to a single microcontroller.
It can not only capture decent 5MP JPEG images, but also can do 5MP full resolution RAW image capture, which makes it to
be the ideal solution for IoT and scientific image processing applications. Even more it can record short movie clips as well.
Feature:
5MP image sensor OV5642
M12/CS mount replaceable lens
I2C interface for the sensor configuration
SPI interface for camera commands and data stream
Support external hardware trigger input
All IO ports are 5V/3.3V tolerant
Well mated with standard Arduino boards
Provide open source code library for Arduino, ESP8266, Raspberry Pi, etc
Small form of factor
Key Specifications:
Power supply 3.3V~5V
Active array size: 2592x1944
SPI speed: Max 8MHz
Shutter: rolling shutter
Frame buffer: 8MByte
Pixel Size: 1.4m x 1.4m
Default M12 Lens: 55
Resolution support:5MP, 1080p, 720p, VGA, QVGA
Format support: RAW, YUV, RGB, JPEG
Size: 34 x 24 mm
Weight: 20g
Temperature: -10C+55C
Packing included:
1pcs Arducam Mini 5MP Plus OV5642 Camera Module
NOTE: Arduino UNO is not incldued
Contact us for datasheet download link.