Which are the best studio microphone with stand available in 2019?
We spent many hours on research to finding studio microphone with stand, reading product features, product specifications for this guide. For those of you who wish to the best studio microphone with stand, you should not miss this article. studio microphone with stand coming in a variety of types but also different price range. The following is the top 10 studio microphone with stand by our suggestions:
We spent many hours on research to finding studio microphone with stand, reading product features, product specifications for this guide. For those of you who wish to the best studio microphone with stand, you should not miss this article. studio microphone with stand coming in a variety of types but also different price range. The following is the top 10 studio microphone with stand by our suggestions:
Best studio microphone with stand
1. Neewer NW-700 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit
Feature
The Set Includes: (1) Condenser Microphone, (1)Adjustable Suspension Scissor Arm Stand, (1)Table Mounting Clamp, (1)Metal Shock Mount, (1)Pop Filter, (1)Ball-type Anti-wind Foam Cap, (1)3.5mm Male to XLR Female Cable. NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally; If you want better sound effect, a sound card should be used; Please use a extra 48V phantom power adapter to connect it (phantom power adapter is not included)The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source.
The adjustable scissor arm stand is made out of all steel construction, sturdy and durable. Folding type, convenient to carry. Can be mounted on the announcers' table. The double-braced arms add strength. Your microphone is held safely on this scissor arm microphone clip.
The microphone wind screen pop filter mask shield can ensure that your tracks are audible and easy to understand.And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.
Description
*PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.*
NOTE:
1.The Condenser Microphone only works with the device that could provide enough power (Voltage Required:5V) for it.
When connected with desktop computer, the Microphone could be used alone;
When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.
2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included).
3.The microphone can not be used with mobile phone and tablet computer. *NOTE: It cannot work with Mac.
4.If you want better sound effect, a sound card should be used.
5.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.
(1)NW-700 Condenser Microphone
Has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.
Low noise, wide dynamic range, high sensitivity output.
Material: Metal
(1)NW-35 Scissor Arm Stand
*Max load: Approx 35oz/1KG*
Double-braced arms equipped with super-strong spring. Adjustable angle & height to show your perfect voice.
Material: Steel
Extend up to 31.5"/80cm.
(1)Pop Filter
(1)Metal Shock Mount
(1)Ball-type Foam Cap
(1)Table Mounting Clamp
(1)3.5mm Male to XLR Female Cable:
Length: 8.2ft/2.5m
2. TONOR Professional Studio Condenser Microphone Computer PC Microphone Kit with 3.5mm XLR/Pop Filter/Scissor Arm Stand/Shock Mount for Professional Studio Recording Podcasting Broadcasting, Blue
Feature
SUITS MORE: Pick-up pattern minimizes background noise and isolates the main sound source. This microphone set is ideal for recording, broadcasting, and can be used for recordings at home or professional studio.(APPLE Mac needs external sound card)DURABLE & STURDY SCISSOR ARM STAND: the suspension scissor arm stand is made of durable steel material. It can be well mounted on the announcers' table with the desk mounting clamp.
PROTECTIVE POP FILTER: the double nylon net microphone wind screen pop filter helps you against plosion and popping to get your best vocal recordings. The 360 degree flexible gooseneck provides adjustment of any angle or position you prefer.
ANTI VIBRATION SHOCK MOUNT: the shock mount is made of solid metal and effectively reduces trill caused by vibration.
NOTE:(1) It CANNOT be used with mobile phone. (2) Voltage Required:5V, to obtain the best sound quality. (3) For optimal sound quality, face the sound source directly onto the screened sides with TONOR logo of the microphone head. (4) 48V Phantom Power Supply and Sound Card are NOT INCLUDED!
Description
Description:This XRL to 3.5mm condenser vocal microphone adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule. With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording,broadcasting etc.
Note:
1.When connect the podcasting condenser microphone with laptop, please connect the laptop to electrical outlet(Voltage Required:5V) or use 48-volt phantom power .
The microphone could be used alone when connect with desktop computer.
2.Please decrease the volume and keep a sufficient distance between the microphone and the speaker to avoid howling sound. Please put the microphone away from the amplifier to avoid recording noise due to amplifier.
3.To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.
4. maximum 5cm thickness for table clamp
Warranty:12-month warranty. 30-day return.
Package Included:
1 x Podcasting Condenser Microphone
1 x Microphone SuspensionScissor Arm Stand
1 x Table Mounting Clamp
1 x Anti Vibration Shock Mount
1 x Microphone Pop Filter
1 x Foam Protective Anti-wind Cap Cover
1x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)
1x USB External Sound Card (for using with Mac.)
IMPORTANT TIP: For optimal sound quality, face the sound source directly onto the screened sides with "TONOR" logo of the microphone head.
3. ZINGYOU Condenser Microphone Bundle, BM-800 Mic Kit with Adjustable Mic Suspension Scissor Arm, Shock Mount and Double-layer Pop Filter for Studio Recording & Brocasting (BM-800 Microphone Bundle)
Feature
Professional Recording Studio Equipment: Equipped with Zingyou BM-800 microphone, Shock mount, Pop filter, Mic adjustable suspension scissor arm stand, Anti-wind foam Cap, Power cable, Sound cardSensitive Capture: The Zingyou BM-800 features thin material diaphragm or "capsule" which vibrates and sends a signal to the output when engaged and is hit by sound waves, it provides an extremely accurate and highly detailed representation of what's being played
Great in both Vocal and Instruments: Wide frequencyresponse makes it an ideal mic to capture vocals, acoustic guitars, acoustic pianos and even strings as the condenser is able to take an accurate snapshot and capture all the subtleties and nuances inherent in these instruments.
Low Noise: It features high signal-to-noiseratio(SNR) that means less distortion to be caused on the process of recording, Unique 3-layer protection system prevents unwanted pop noises-providing singers with a clear, plosive-free vocal performance
With detailed assemble video and Instruction document, 7 days no reason to refund, 30-day replacement service, 1 year warranty
Description
OVERVIEWThe ZINGYOU BM-800 condenser microphone is one of the world's quietest microphones, and it comes complete with a ton of essential accessories! Its ultra-low self-noise means you'll effortlessly capture clean, clear audio. The ZINGYOU BM-800 can handle 2dB SPL so you can be confident that even in front of loud guitar cabinets, your recording won't distort due to overload. This great mic comes with a shock mount, a pop screen, a dust cover, an XLR cable, and more. By providing ultra-quiet operation and being versatile enough to handle a wide variety of signals, the ZINGYOU BM-800 is an affordable studio solution!
SPECIFICATION
Element: 34 pressure gradient transducer
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Sensitivity: -28dB2dB0dB=1V/Pa at 1kHz
Output Impedance: 15030%at 1kHz
Load Impedance: 1000
Equivalent Noise Level: 16dBA
Max. SPL: 130dB(at 1kHz1% T.H.D)
S/N Ration: 78dB
Electrical Current: 3mA
Net Weight: 346g
Body Dimension: 46 x 150mm
4. NEEWER Adjustable Microphone Suspension Boom Scissor Arm Stand, Max Load 1 KG Compact Mic Stand Made of Durable Steel for Radio Broadcasting Studio, Voice-Over Sound Studio, Stages, and TV Stations
Feature
PLEASE NOTE: Max. Microphone Clip Diameter is 1.26/32mm and Max. load is approx 1 kilogram; Microphone and Filter. Shield Mask NOT Included; The Stand is NOT Suitable for Blue Yeti USB MicrophoneThe adjustable Black Scissor Arm Stand is made of high quality steel frame, plastic Mic Clip (INCLUDED), sturdy and durable.
Folding type, convenient to carry. The adjustable arms allow you to carry it with you easily and adjust the suitable angle and height to show your perfect voice.
Can be mounted on the announcers' table with the Table Mounting Clamp(INCLUDED).
Compact microphone stand designed for heavy duty carry. Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. Completely flexible, firmly attach the microphone anywhere. Please Note: Kindly refer the Instructional Video before use which is very essential.
Description
PLEASE NOTE:
The Stand is NOT Suitable for Blue Yeti USB Microphone.
Max. Microphone Clip Diameter is 1.26"/32mm.
Microphone & Filter Shield Mask NOT Included!
(1) Microphone Scissor Arm Stand (BLACK) + (1) Table Mounting Clamp (BLACK):
Ideal for radio broadcasting studio, voice-over sound studio, stages, and TV stations, etc. YOU CAN NOT MISS IT!
The Scissor Arm Stand is equipped with super-strong spring so that it can stand much more weight.
Your microphone is held safely and firmly on this scissor arm microphone clip.
The double-braced arms add strength. Extend up to Approx.31.5"/80cm.
Max load: Approx 1 KG
Material: Steel
Color: Black
(1) Standard Microphone Clip (PLASTIC/BLACK):
A standard microphone clip to mount most standard-sized handheld microphone.
Package Contents:
1x Black Microphone Scissor Arm Stand
1x Black Table Mounting Clamp
1x Black Microphone Clip
5. AxcessAbles SF-101KIT SF-101 Recording Studio Microphone Isolation Shield w/Stand (Black)
Feature
Great for Professional Vocal/Acoustic Recording and Podcasting Sound Booth10LB Heavy-Duty Vocal Booth For Desktop Use | Has ability to mount on stands & tube sizes from 15mm to 35mm
Sharp 2 inch thick high density foam for the best noise reflection reduction
Microphone mounting system with adjustable depth.Five 6.5 inch panels total with the outer two adjustable/foldable panels on hinge joints to open and fully close in every position in-between.
Includes designated supporting Stand
Description
AxcessAbles SF-101Kit Recording Studio Microphone Isolation Shield Redirects the Internal Sound Energy Away from the Microphone for the best quality recording. The SF-101Kit gets maximum sound isolation by blocking reflected sounds from the recording environment to the microphone. Easily mounts to most heavy speaker stands and has flexibility to adjust the microphone proximity.6. Aokeo AK-70 Professional Studio Live Stream Broadcasting Recording Condenser Microphone With Folding Adjustable Tripod Boom Floor Stand, Shock Mount, Pop Filter, USB Sound Card and Mounting Clamp
Feature
This model boasts high quality metal construction and composite leg housing, making it lightweight and unbreakable. *FREE GIFT from Aokeo: Now we included a USB Sound Card to solve majority of your issues.*Kit includes: (1) AK-70 Condenser Microphone + (1) AK-107 Adjustable 13"-20"/32cm-52cm Mic Tripod Boom Floor Stand + (1) Shock Mount + (1) Pop Filter + (1) Ball-type Anti-wind Foam Cap + (1) 3.5MM to XLR Cable + (1) Mic Butterfly Clip + (1) Mic Clip Holder + (1) 5/8" Male to 3/8" Female Screw Adapter.
Professional AK-70 Condenser Microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern MINIMIZES background noise and isolates the main sound source.
This model boasts high quality metal construction and composite leg housing, making it lightweight and unbreakable. NOTE: * MACBOOKS REQUIRE A SOUND CARD/INTERFACE TO WORK PROPERLY. THIS APPLIES TO OTHER DEVICE AS WELL PLEASE CHECK YOUR DEVICE TO MAKE SURE IT WORKS!*
Professional quality die-cast zinc clutch locks vertical shaft at any height from 13 to 20 inches. NOTE: * REQUIRES 5V OF POWER FROM PLUG IN SOURCE TO WORK, PHANTOM POWER MIGHT BE REQUIRED *
Description
Kit Includes (1) AK-70 Condenser Microphone: The professional condenser microphone has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal. Gold-sputtered diaphragm for accurate sound reproduction. Low noise, wide dynamic range and high sensitivity output. Fashionable design. Noble and elegant appearance. Sturdy and Durable. Specification: Polar Pattern: Cardioid Body Weight: 11oz/316g Color: Black Material: Metal NOTE: The AK-70 Condenser Microphone require 5v from the plug in source to work properly. If your source can't provide the 5v, the 48v phantom power would be required. Some laptop like Macbook will require a sound card/interface to work properly. Please make sure your device meet these requirements to function normally. (1) Microphone Tripod Boom Floor Stand with Clip: This model boasts hybrid sheet METAL and composite leg housing, making it lightweight and unbreakable. Professional quality die-cast zinc clutch locks vertical shaft at any height from 13 to 20 inches. The legs fold down for the most compact storage. Specifications: Material: Metal Height Adj.: 13"-20"/32cm-52cm Boom Length: 10"/25cm (1) Microphone Wind Screen Pop Filter Mask Shield: Protect your microphone from surplus spit caused by over eager performers. (1)Metal Mic Shock Mount: Isolate most studio condenser mic from physical vibration, floor, and stand noise. (1) Ball-type Anti-wind Foam Cap: Reduce the occurrence of wind. (1) Audio Cable: Length: Approx. 2.5m/8.2feet7. Neewer Professional Studio Broadcasting / Recording NW-700 Condenser Microphone & NW-107 Folding Type Height Adjustable Microphone Tripod Boom Floor Stand Kit
Feature
Kit includes: (1)NW-700 Condenser Microphone + (1)NW-107 Folding Type Adjustable 13"-20"/32cm-52cm Microphone Tripod Boom Floor Stand with Clip + (1)Metal Microphone Shock Mount + (1)NW-3 Studio Microphone Wind Screen Pop Filter Mask Shield + (1)Ball-type Anti-wind Foam Cap + (1)Microphone Audio Cable; Note: It cannot work with MacProfessional NW-700 Condenser Microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern MINIMIZES background noise and isolates the main sound source.
NW-107 Metal Microphone Stand is a durable tripod stand and 10"/25cm boom combination.Folding legs with rubber are designed for durability and reduce floor vibrations.
NW-3 Microphone Wind Screen Pop Filter Mask Shield can ensure that your tracks are audible and easy to understand. And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds
Description
(1)NW-700 Condenser Microphone:
The professional condenser microphone has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.
Gold-sputtered diaphragm for accurate sound reproduction.
Low noise, wide dynamic range and high sensitivity output.
Fashionable design. Noble and elegant appearance.Sturdy and durable.
Specification:
Polar Pattern: Cardioid
Body Weight: 11oz/316g
Color: Black
Material: Metal
NOTE: The NW-700 Condenser Microphone is POWERED by the advanced SOUND CARD with 5 VOLTS, NOT the traditional battery powered. SO PLEASE CHECK your computer's sound card before using the microphone.(Generally, the voltage of old type computer's sound card is 3V, new type computer is 5V.) The 3V Sound Card will make the microphone's sound LOWER, while the 5V Sound Card will make the sound normal.
(1)Microphone Tripod Boom Floor Stand with Clip:
This model boasts hybrid sheet METAL and composite leg housing, making it lightweight and unbreakable.
Professional quality die-cast zinc clutch locks vertical shaft at any height from 13 to 20 inches.
The legs fold down for the most compact storage.
Specifications:
Material: Metal
Height Adj.: 13"-20"/32cm-52cm
Boom Length: 10"/25cm
(1)Microphone Wind Screen Pop Filter Mask Shield:
Protect your microphone from surplus spit caused by over eager performers.
(1)Metal Mic Shock Mount:
Isolate most studio condenser mics from physical vibration, floor, and stand noise.
(1)Ball-type Anti-wind Foam Cap:
Reduce the occurrence of wind, breath sounds and popping noises.
(1)Audio Cable:
Length: Approx. 2.5m/8.2feet
8. TONOR Professional Studio Condenser Microphone Computer PC Microphone Kit with 3.5mm XLR/Pop Filter/Scissor Arm Stand/Shock Mount for Professional Studio Recording Podcasting Broadcasting, Black
Feature
GOOD SOUND EFFECT MICROPHONE: this condenser microphone adopts complete electronic circuit control and has a gold-plate diaphragm capsule. With a good cardioid polar pickup pattern, the microphone minimizes background noise and accurately records the subtlest sound.DURABLE & STURDY SCISSOR ARM STAND: the suspension scissor arm stand is made of durable steel material. It can be easily mounted on the announcers' table with the table mounting clamp.
PROTECTIVE POP FILTER: the microphone wind screen pop filter or anti-wind cap cover protects your microphone from surplus spit / saliva, and helps to get your best vocal recordings.
ANTI VIBRATION SHOCK MOUNT: the shock mount is made of solid metal and effectively reduces the trill caused by vibration.
NOTE:(1) It CANNOT be used with mobile phone. (2) Voltage Required:5V, to obtain the best sound quality. (3) For optimal sound quality, face the sound source directly onto the screened sides with TONOR logo of the microphone head. (4) 48V Phantom Power Supply & Sound Card are NOT INCLUDED!
Description
Description:This XRL to 3.5mm condenser microphone adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule. With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording,broadcasting etc.
Note:
1.When connect the podcasting condenser microphone with laptop, please connect the laptop to electrical outlet(Voltage Required:5V) or use 48-volt phantom power .
The microphone could be used alone when connect with desktop computer.
2.Please decrease the volume and keep a sufficient distance between the microphone and the speaker to avoid howling sound. Please put the microphone away from the amplifier to avoid recording noise due to amplifier.
3.To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.
4.Facing the "TONOR"logo directly when you arrange the set up, and the voice will sounds more clear.
Warranty:12-month warranty. 30-day return.
Package Included:
1 x Podcasting Condenser Microphone
1 x Microphone SuspensionScissor Arm Stand
1 x Table Mounting Clamp
1 x Anti Vibration Shock Mount
1 x Microphone Pop Filter
1 x Foam Protective Anti-wind Cap Cover
1x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)
1x USB External Sound Card (for using with Mac.)
9. Neewer NW002-1 Wind Screen Bracket Stand with Aluminum Tube, Non-slip Feet, Adjustable Height, 65.2 inches/165.5 centimeters Stand Suitable for Supporting Acoustic Isolation Shield in Studio (Black)
Feature
Suitable for supporting microphone, acoustic isolation shield and pop filter in studio to record clear vocalMade of sturdy aluminum and stable tripod design, heavy duty, non-slip feet, adjustable height for common use
Multiple holes facilitate to adjust the height; Simple to operate, only with two knobs
Standard 5/8-inch Thread Mount: Allow it directly plug into the socket of the acoustic isolation shield; Max length: 65.2 inches/ 165.5 centimeters; Min length: 39.4 inches/ 100 centimeters
Note: Microphone, acoustic isolation shield, pop filter and headphone are not included
Description
Note: Microphone, acoustic isolation shield, pop filter and headphone are not included.
Description
The heavy duty microphone stand is stable, sturdy and durable. It is suitable for supporting microphone, acoustic isolation shield and pop filter in studio to record clear vocal.
It is made of aluminum and with tripod design, non-slip feet. Its adjustable height can meet most demands. The max length can reach 65.2 inches/ 165.5 centimeters, while the min length is 39.4 inches/ 100 centimeters.
It is quite easy to adjust the height with multiple holes on the tube. And with only two knobs, it is also susceptible to install and pack.
It has a standard 5/8-inch thread mount, can be directly plugged into the socket of the acoustic shield.
Specification
Material: Aluminum
Color: Black
Max Length: 65.2 inches/ 165.5 centimeters
Min Length: 39.4 inches/ 100 centimeters
Weight: 85.30 ounces/ 2418.21 grams
Package Contents
1 x NW002-1 Heavy Duty Tripod Microphone Stand
10. Neewer NW-700 Professional Condenser Microphone & NW-35 Suspension Boom Scissor Arm Stand with XLR Cable and Mounting Clamp & NW-3 Pop Filter & 48V Phantom Power Supply with Adapter Kit
Feature
Kit includes: (1)Condenser Microphone + (1)Metal Shock Mount + (1)3.5mm to XLR Audio Cable + (1)Ball-type Foam Cap + (1)Pop Filter + (1)Scissor Arm Stand+(1)XLR Female to XLR Male Cable + (1)Table Mounting Clamp + (1)48V Phantom Power Supply + (1)AdapterThe NW-700 professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source
NW-35 SUSPENSION STAND: made of all steel construction, sturdy and durable. *Max load: Approx 53oz / 1.5KG*. PlEASE NOTE: This Stand is NOT Suitable for Blue Yeti USB Microphone
48V Phantom Power Supply delivers reliable 48V power. Universal XLR input and output. On/off power switch and LED indicator. Comes with one adapter
Shock Mount Diameter: 1.6"-1.8"/43mm-46mm. Table Mounting Clamp Maximum Opening: 1.7"/4.5cm. PLEASE VERIFY the size of your microphone and the thickness of table BEFORE ORDERING
Description
NOTE 1:
* Stand Max load: Approx 53oz / 1.5KG. NOT Suitable for Blue Yeti USB Microphone!
* Shock Mount Diameter: 1.6"-1.8"/43mm-46mm. PLEASE VERIFY the size of your microphone BEFORE ORDERING!
* Table Mounting Clamp Maximum Opening: 1.7"/4.5cm. PLEASE VERIFY the thickness of your table BEFORE ORDERING!
NOTE 2:
1.The microphone cannot be used with mobile phone and tablet computer.
*NOTE: It cannot work with Mac.
2.If you want better sound effect, a sound card should be used.
3.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.
Description:
(1)NW-700 Condenser Microphone
Gold-sputtered diaphragm for accurate sound reproduction.
Low noise, wide dynamic range and high sensitivity output.
Fashionable design. Noble and elegant appearance. Sturdy and durable.
Weight: 11oz/316g
Material: Metal
(1)NW-35 Suspension Boom Scissor Arm Stand
*Max load: Approx 53oz / 1.5KG*
enhances the scissor suspension microphone stand's overall appearance.
Double-braced arms add strength to stand much more weight.
Material: Metal
(1)48V Phantom Power Supply with (1)Adapter
Input Voltage: 110
Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer.
On/off power switch and LED indicator for ease of operation.
One Adapter is included.
Size: 3.9" x 3.5" x 1.6" / 10 x 8.8 x 4.1cm
(1)NW-3 Pop Filter
Diameter: 5.9" / 15cm
Gooseneck Length: 14.7" / 37.5cm
(1)Metal Table Mounting Clamp
Maximum Opening: 1.7"/4.5cm
(1)Metal Shock Mount
Diameter: 1.6"-1.8"/43mm-46mm
(1)3.5mm to XLR Audio Cable
(1)Ball-type Foam Cap
(1)XLR Female to XLR Male Audio Cable