Which are the best explorer hat pi available in 2019?
Shopping for the best explorer hat pi is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy explorer hat pi. Don’t worry any more! We spend many hours to review and compare explorer hat pi to make the short list for you. Let’s check which product is suitable with you.
Shopping for the best explorer hat pi is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy explorer hat pi. Don’t worry any more! We spend many hours to review and compare explorer hat pi to make the short list for you. Let’s check which product is suitable with you.
Best explorer hat pi
1. Pimoroni Explorer pHAT for Pi Zero and Compatible with Raspberry Pi 3 / 2 / B+ / A+
Feature
The Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi!Four analog inputs
Two H-bridge motor drivers
Four powered 5V outputs (up to 500mA!)
Description
Based on our very popular Explorer Hat Pro this is a smaller cheaper version designed to fit perfectly on a Raspberry Pi Zero! We've added a heap of useful input and output options that will take your projects to the next level. Great for driving motors, using analog sensors, and interfacing with 5V systems (such as many Arduino boards). Though designed to match the format of the Raspberry Pi Zero it is compatible with all 40-pin GPIO Raspberry Pi variants (3/2/B+/A+/Zero). Features: Python API Four analog inputs Two H-bridge motor drivers Four buffered 5V tolerant inputs Four powered 5V outputs (up to 500mA!) Kit includes: Assembled Explorer pHAT PCB 2x20 0.1" female GPIO header 1x20 0.1" female header Four analog inputs - A tidy way to integrate analog signals into your project. Two H-Bridge motor drivers - Drive two 5V motors bidirectionally with up to 200mA per channel. Ideal with our micro-metal gear-motors to create the perfect little buggy! You can even soft-PWM for full speed control. 5V tolerant inputs - Hook up your Pi to accept input from 5V systems (like Arduino Uno/Leonardo or 5V Trinkets). We've used a 5-channel buffer that will accept anything from 2V-5V as logic high. 5V powered ouputs - The onboard darlington array can supply up to 500mA per channel (but you'll be limited to driving around 1A total from the board). Ideal for stepper motors, solenoids, and relays.2. 2427, Pimoroni Explorer Hat Pro for Raspberry Pi
Description
2427, Pimoroni Explorer Hat Pro For Raspberry Pi3. seeed studio RF Explorer H-Loop Near Field Antenna (RFEAN25)
Feature
Robust calibrated low cost H-loop near field antennaCan work with RF Explorer Spectrum Analyzer, Signal Generator and other RF instruments and devices
Easy to use, reliable to find interference sources with high accuracy and resolution
Can be used to detect hidden bugs and transmission sources with great spatial resolution
Feasible to generate interferences with Signal Generator and confirm RF circuit sensitivity
Description
RF Explorer RFEAH-25 is a 25mm diameter, high performance near field H-Loop antenna. RFEAH-25 is a very sensitive, compact and easy to use H-loop near field antenna. The low-loss design exhibits at least 10dB more sensitivity in the range 20-6000MHz than other H-loop options in the market, at a much lower cost. Compared with other near field antennas, RFEAH- 25 is smaller and lighter, exactly what fits best when space is constrained in a PCB. Included with the antenna is high quality semiflexible RF cable , this cable works as the handler of the antenna. The big advantage of this approach: you can shape the cable the way you want for the antenna to be located exactly where you need it, in most cases with no need to hold it in your hand.Capable of pre-EMC compliance tests
Specification
Connector: SMA female
High frequency RF SMA Male-Male included
Type: H-loop near field
Characterized response: 1MHz to 7Ghz
RoHS compliant
Part List
1 x H-loop near field antenna
1 x Semirigid SMA Male-Male RG402 10cm 6GHz cable
4. RF Explorer Near Field Antenna Kit
Feature
Robust calibrated near field low cost 3x H-Loop and 1x E-Field antennaCan work with RF Explorer Spectrum Analyzer, Signal Generator and other RF instruments and devices
Easy to use, reliable to find interference sources with high accuracy and resolution Can be used to detect hidden bugs and transmission sources with remarkable spatial resolution Feasible to generate interferences with Signal Generator and confirm RF circuit sensitivity
Include semi-rigid RF cable with coupled Push-ON SMA for easy operation and antenna selection
Protected by custom-designed, wooden box case with quality foam protection inside.
Description
RF Explorer Near Field Antenna Kit is a collection of high performance set of 4 antennas designed for the most demanding RF diagnosis tasks:RFEAH-25 - 25mm H-Loop
RFEAH-15 - 15mm H-Loop
RFEAH-5 - 5mm H-Loop
RFEAE-10 - 10mm E-Field
The three magnetic H-Loop antennas are very sensitive, compact and easy to use antennas for all sort of radiation sources. As the antenna diameter gets shorter, the antenna increase spatial resolution at the cost of some sensitivity loss; you should select RFEAH-25 for best sensitivity with connectors, large ICs and isolated signal traces, whereas RFEAH-5 works best for very narrow selective work in a populated PCB with close-by signal traces. RFEAH-15 is a good in-between compromise.
The electric field RFEAE-10 offers a remarkable spatial resolution to determine the exact component in the PCB causing a problem, no matter how small it is.
The low loss design of these antennas exhibits at least 10dB more sensitivity than other near field antennas in the market, at a much lower cost.
Compared with other near field antennas, RF Explorer are smaller and lighter, exactly what fits best when space is constrained in a PCB.
Included with the antenna is high quality semirigid RF cable; this cable works as the handler of the antenna. The big advantage of this approach: you can shape the cable the way you want for the antenna to be located exactly where you need it, in most cases with no need to hold it in your hand.
The RF cable is coupled with a fast, easy to use SMA Push-On adapter. There is no need to deal with SMA nuts, just plug-n-play antennas.
Capable of pre-EMC compliance tests
Specifications:
Antenna Connector: SMA female
High frequency RF SMA Male-Male cable included
SMA Push-On adapter included
E-Field and H-loop near field antennas
Characterized response: 1MHz to 7Ghz
5. waveshare Servo Driver HAT Board for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ 16-Channel Servo/PWM Outputs with I2C Interface Used for Controlling Robotic Arm or Hexapod Walker
Feature
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+I2C controlled, using only 2 pins,Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal,Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
Reserved I2C control pins, allows to work with other control boards
Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)
Description
Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface
OverviewNeedless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you.
Specifications
Power supply: 5V (Pi connector)OR6V~12V (VIN terminal)
Servo voltage: 5V
Logic voltage: 3.3V
Driver: PCA9685
Control interface: I2C
Dimension: 65mm x 30mm
Mounting hole size: 3.0mm
6. Pimoroni Explorer HAT Pro
Feature
The Pimoroni Explorer HAT Pro is a "shield" for the Raspberry Pi and provides you with the perfect prototyping sidekick for your Pi.The Explorer HAT Pro has a heap of useful input and output options that will take your Raspberry Pi projects to the next level.
This add-on board is great for driving motors, using analog sensors, interfacing with 5V systems and touch (even fruit-based!) interfaces.
Each Pimoroni Explorer HAT Pro easily snaps on top of a Raspberry Pi equipped with a 40-pin (2x20) GPIO.
Skill Level: Assembled and Tested
Description
The Pimoroni Explorer HAT Pro is a "shield" for the Raspberry Pi and provides you with the perfect prototyping sidekick for your Pi.
The Explorer HAT Pro has a heap of useful input and output options that will take your Raspberry Pi projects to the next level.
This add-on board is great for driving motors, using analog sensors, interfacing with 5V systems and touch (even fruit-based!) interfaces.
Each Pimoroni Explorer HAT Pro easily snaps on top of a Raspberry Pi equipped with a 40-pin (2x20) GPIO.
Pimoroni has created a GitHub repository bundling the Explorer software with a set of examples to get you started in an easy-to-use Python module to get prototyping right away.
Features:
Four buffered 5V tolerant inputs
Four powered 5V outputs (up to 500mA!)
Four capacitive touch pads
Four capacitive crocodile clip pads
Four 4-colored LEDs
Four analog inputs
Two H-bridge motor drivers
A heap of useful (unprotected) 3v3 goodies from the GPIO
A mini breadboard on top!
7. Pimoroni STS: Build a Raspberry Pi Roving Robot
Description
5.... 4.... 3.... 2.... 1.... Turn your Raspberry Pi into a spaceship!This robot chassis is designed to be used with the Explorer HAT Pro board though it will work with other motor drivers.
The kit is a great way to introduce yourself to robots and controlling motors with your Raspberry Pi. It even includes a camera mount so your little robot can take pictures while it's roaming around!
There is no soldering required and the whole kit can be put together with a small flat-head screwdriver.
Kit includes
Laser cut chassis
Raspberry Pi camera mount
2 x super-grippy moon-buggy wheels
2 x push header motors (298:1 ratio)
0.5" front castor wheel
Jumper leads
2 x motor mounting brackets
2 x battery clips (battery optional and not included)
Nuts, bolts, and other fixings
Build up your robot and program it in Python, Scratch, or whatever language you prefer! Add a USB battery pack (not included) and a WiFi dongle and you can make it roam free!
Does not include the Raspberry Pi, Raspberry Pi Camera, or Explorer HAT (Pro or pHAT).
Connor Plant has produced a video tutorial to help you build your STS-Pi, below.
8. Adafruit Accessories Pimoroni Explorer HAT Pro for Raspberry Pi
9. Mkajkkok Peace Love & PI Adjustable Truck Cap For Children.
Feature
It Is Suitable For Spring And SummerFabric: 35% Cotton, 65% Nylon
The Male And Female Designs Look Great
Recommended Teens Or Children Under 13 Years Of Age
Light And Unbound, The Work Is Exquisite, The Four Lines Are Sewn, More Durable
Description
Size: 9cm: 6cm: Cap Adjustable From 17 Inches To 24 Inches. Suitable For Children Over 13 Years Old,Group Activities, Class Activities. Light And Free,
fine Workmanship, Four-thread Sewing, More Durable.
10. PIM082 - Breakout Board, Explorer HAT Pro For Raspberry Pi, Solderless Breadboard (Pack of 2) (PIM082)
Feature
For Use With : Raspberry PiKit Contents : Explorer HAT Pro Raspberry Pi Board
Description
Product Information:
- Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi. It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projects. Great for little robots, games, science experiments, exploring small electronic circuits, and interacting with you Pi.
- Four buffered 5V tolerant inputs (perfect for Arduino compatibility)
- Four powered 5V outputs (up to 500mA total across all four channels)
- Four capacitive touch pads (labelled 1, 2, 3, 4)
- Four capacitive crocodile clip pads (labelled 5, 6, 7, 8)
- Four coloured LEDs (red, green, blue, and yellow)
- Four analog inputs
- Two H-bridge motor drivers (up to 200mA per channel; soft PWM control)
- A heap of useful (unprotected) 3v3 goodies from the GPIO
- A mini breadboard on top!
- Compatible with Raspberry Pi 3, 2, B+, A+, and Zero
- Python library
- Comes fully assembled
Specification:
- For Use With : Raspberry Pi
- Kit Contents : Explorer HAT Pro Raspberry Pi Board
Product Information 2:
- RoHS Compliant: To be advised
- Denotes whether a product is RoHS compliant and to what level
- More info on our RoHS & Legislation pages
- RoHS Phthalates Compliant: To be advised
- Denotes whether a product is RoHS compliant and to what level
- More info on our RoHS & Legislation pages
- SVHC: To Be Advised
- Denotes whether a product contains a Substance of Very High Concern
- More info on our RoHS & Legislation pages
- Product Compliance Certificate
- Authorized Distributor