Where to find v6 extruder?
When you looking for v6 extruder, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable v6 extruder is not an easy task. In this post, we show you how to find the right v6 extruder along with our top-rated reviews. Please check out our suggestions to find the best v6 extruder for you.
When you looking for v6 extruder, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable v6 extruder is not an easy task. In this post, we show you how to find the right v6 extruder along with our top-rated reviews. Please check out our suggestions to find the best v6 extruder for you.
Best v6 extruder
![[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer 1.75mm Filament / 0.4mm Nozzle](https://images-na.ssl-images-amazon.com/images/I/51JUjY-pBDL.jpg)
![[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer - 24V /1.75mm Filament / 0.4mm Nozzle.](https://images-na.ssl-images-amazon.com/images/I/51fOQTqPMWL.jpg)
1. Witbot All-Metal l Heatbreak Throat for V6 RepRap 3D Printer Hotend 1.75mm (Pack of 5pcs)
Feature
All metal heat break for V6Durable and stable performance
Compatible with 1.75mm Filament Hotends
Material: Stainless Steel
Inner diameter: 2mm for 1.75mm filament
Description
Specification:
Material: Stainless Steel
Inner diameter: 2mm for 1.75mm filament
Package Content:
5* All-Metal l Heatbreak Throat
2. [Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer 1.75mm Filament / 0.4mm Nozzle
Feature
Link to online assembly and configuration instructions is printed on the packageOur hotend comes with original design silicone protective sock
12V 40W heater, 12V fan, NTC 3950 pre-wired thermistor are included in the kit
Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing
Description
Hotend is equipped with NTC3950 thermistor and 12V 40W heater
This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate.
NTC 3950 Thermistor parameters:
NTC3950 thermistor temperature table now incuded in Marlin firmware
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
Package contents:
1 x V6 All Metal hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
1 x Silicone heat protection sock
1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic Straight Fitting to connect to extruder cold end.
1 x Thermal Protection Silicone Sock
3. Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
Feature
Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intallAnti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280C, 12V high speed fan, radiating quickly
Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat
Description
Descriptions:Please recognize the seller: Wangdd22
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.
Notice: Small parts, keep away from children
Specification:
12V/40W heater,temperature can be up to 280CLong-term temperature: 240C/ short-term temperature: 280C
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
A v6 heating block
Outer thread : M6 M7
Throat outer diameter: 6mm
Throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm
Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x V6 heating block
2 x teflon tube within stainless steel nozzle throat
4. E3D All-metal v6 HotEnd Full Kit - 1.75mm Universal - Direct, 12v - Approximately 120mm PTFE (ASSEMBLY REQUIRED)
Feature
Heater Cartridge - 12V 30WThermistor Cartridge
30x30x10 DC Fan
Fan Duct - Cable Tie
100mm PTFE/800mm PTFE (Depending on bowden add-on or not)
Description
The v6 HotEnd Full Kit from E3D has been redesigned for your convenience from the ground up! This new hot end contains the same signature high temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE (Polytetrafluoroethylene) liner tube through the hotend that you can extend into your extruder - this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments. This technology opens new doors for your 3D printing aspirations. With High Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon - this also eliminates HotEnd meltdown failures that are common with PTFE designs. Even though the v6 has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. Basically, this design is really in-tune with all the elements, so your prints will come out crisp and accurate. The v6 has cut back on a bunch of bulk. This clean-cut version's overall length is only 62mm, and there are significant reductions in the X/Y dimensions by using the new injection moulded fan duct. Are you eager to start printing right away? Good. So are we - and that's why here at MatterHackers we praise the v6 HotEnd. No adhesives, Kapton tape, or soldering is needed to get started. The new v6 simply locks into place with a little screw, high-temp glass sleeving is used to insulate the thermistor legs. This makes installing the hotend (as well as removing) a quick and smooth process compared to earlier methods involving various adhesives.The parts of the hotend just screw together, and the fan duct naturally clips in - this can be manipulated in different ways to suit your setup preference.5. Kee Pang All-Metal V6 J-Head Hotend Extruder Hotend kit with 2 pcs Stainless Steel Nozzle Throat + 5 Pcs Brass Printer Nozzles for E3D V6 Makerbot RepRap 3D Printers
Feature
100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacementHigh temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly
Compatibility: Compatible with all 1.75mm V6 3D printer
Description
Attention: Small parts, keep away from childrenKee Pang All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 2 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers
Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280C?Long-term temperature: 240C/ short-term temperature: 280C? 12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Note:
Compatibility:Compatible with all 1.75mm V6 3D printer
package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFETube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.
6. Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers
Feature
100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacementHigh temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly
Compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
Description
100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement12V/40W heater,temperature can be up to 280CLong-term temperature: 240C/ short-term temperature: 280C
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer
package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x one meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic fittings
1 x 0.3mm nozzle print head
3 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
2 x 1.75mm stainless steel nozzle throat
1 x volcano heating block(one more 12V/40W heater and 100k NTC Thermistor)
4 pcs long nozzles(1.75mm/0.6mm,0.8mm ,1mm,1.2mm)
1 x M3 hex driver
7. Genuine E3D V6 All-Metal HotEnd 1.75mm Universal w/ Bowden Full Kit 12V (V6-175-B)
Feature
Genuine E3D PartsThe E3D V6 Hot End: Smaller, Easier, High Performance
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor
Low bulk in X/Y dimensions
Description
Print the Widest Possible Range of Materials
The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.
Compact
E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!
Easy to Use
The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.
High Quality Printing
E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.
Adaptable
The V6 is a fully-integrated part of the E3D Ecosystem. E3D's nozzles and blocks give more opportunity to choose how to print.
8. V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers
Feature
Package include: All metal v6 j-head hotend full kit + 10 pcs extruder brass nozzle print head + 5 pcs stainless steel nozzle throat.12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280C, 12V high speed fan, lose heat quickly.
Compatible with all 1.75mm v6 makerbot 3d printer. Nozzle and tube connect seamless, prevent material leaking and blocking.
Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
Easy to install, NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors).
Description
Specification of All Metal V6 Hotend Full kit:12V/40W heater, the temperature can up to 280CLong-term temperature: 240C/ short-term temperature: 280C
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting
Specification of Extruder Tube:
Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel
Specification of Brass Nozzle:
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm
Note:
Compatibility:Compatible with all 1.75mm V6 Makerbot 3D printer
Attention: Small parts, keep away from children
Package Included:
1 x All Metal V6 hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat
9. [Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer - 24V /1.75mm Filament / 0.4mm Nozzle.
Feature
Link to online assembly and configuration instructions is printed on the packageOur hotend comes with original design silicone protective sock
24V 40W heater, 24V fan, NTC 3950 pre-wired thermistor are included in the kit
Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing
Description
Hotend is equipped with NTC3950 thermistors, 24V 40W heater, 24V fan
24V powered V6 hotend can be used as upgrade to various 3d printers with 24V power supplies, as well as for DIY projects.
NTC 3950 Thermistor parameters:
Use TEMP Sensor number 11 in Marlin firmware.
Small Size: 1.25mmx2.0mm glass bead.
High accuracy: 1%.
Resistance value at 25C=100K.
Wiring insulation: high temperature teflon/PTFE.
Wiring length: 1 meter.
Package contents:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle.
1 x 24 40W Heater with 1 meter long wiring.
1 x NTC3950 Thermistor wuth 1 meter long wiring.
1 x Heatsink Shroud with High Speed Fan 3010 24V 0.13A.
1 x One Meter long Bowden tubing 4mm OD 2mm ID.
1 x PC4-01 threaded 1/8" NPT fitting.
1 x Thermal Protection Silicone Sock.
10. Wangdd22 3D Printer Parts Improved 3D V6 Hexagon Universal Hotend Kit 0.4mm/1.75mm Straight Through Throat Extruder Hot End Kit with Fan Kit
Feature
Compared to the ordinary aluminum in the market, it adopts high-purity aviation aluminum, is more durable.Great texture. Hotend surface is with oxidation scrub, and the black paint texture makes it more upscale.
Processed by CNC machine, pay attention to the details of each process to ensure the processing accuracy, and every part is highly joined.
Improved installation makes the hotend can be dismantled in case of clogged, solve the problem, and extend service life. At the same time, it can be modularly replaced and assembled.
Straight through throat, the filament can be direct access to the nozzle, makes the feeding more smoothly to reduce clogging (the maximum temperature should not be over 260 . )
Description
Description:Basic parameters:
Temperature resistance: HT-NTC100K (no need to change the firmware, directly replace the old thermistor)
Feeding type: remote feeding
Heater power: 50W
Type of pipe: straight through throat
Heater voltage: 12V
Line length: 1M
Product weight: just the sensor 36g, with 1M heater 65g
Note: This product is with the high temperature line but the hotend itself is through throat, with Teflon inside, so the temperature can not exceed 260 degrees, otherwise it will cause Teflon melt and get clogged!
Package includes:
Hotend+Fan stents+Cooling fan+1M Heater&Thermistor