Top transmitter yongnuo for 2019
If you looking for transmitter yongnuo then you are right place. We are searching for the best transmitter yongnuo on the market and analyze these products to provide you the best choice.
If you looking for transmitter yongnuo then you are right place. We are searching for the best transmitter yongnuo on the market and analyze these products to provide you the best choice.
Best transmitter yongnuo
1. Yongnuo Speedlite Wireless Transmitter YN-E3-RT for Canon Cameras AS ST-E3-RT
Feature
Power Source: 2 AA/LR6 alkaline batteries Ni-MH batteries (Best with Polaroid AA/LR6 batteries)Wireless flash shooting time: Approx. time: 10 continuous hours ** when using AA/LR6 alkaline batteries
Power saving: Power off after 5 min. of idel operation
Weight: Approx.110g(transmitter only, excluding batteries)
Firmware update: Provided
Description
The YONGNUO Speedlite Transmitter YN-E3-RT is a transmitter for wireless flash flash shooting. It can control up to 5 groups (15 units) of Speedlites that have a wireless mltiple flash shooting function using radio transmission.The transmitter also has dust and water resistance equivalent to EOS-1D series cameras.
Functions:
Two-way 2.4G radio communication, fuly campatible with ST-3E-RT/600EX-RT 15 Physical Channels, 1 Auto Channel, Up to 10,000 customizable photographer ID
Transmission Range: 100M
Multi YN-E3-RT can share slave flashes
Display group/charge status of slave flashes
Firmware can be upgraded via USB
High resolution Dot-Matrix LCD, Backlight for LCD/keys
Fast lock mechanism
Built-in AF assist beam emitter, buzzer
Remote shutter release, Linked Shot (Need extra shutter cable for cameras released before 2012)
Flash Mode: ETTL/M/Multi/GR 4 flash modes
A/B/C/D/E 5 groups
Supports 1st Curtain, 2nd Curtain (Only in M mode), High speed Sync
Supports ETTL Ratio, Flash Exposure Compensation, Flash Exposure Lock, Flash Exposure Bracket, Modeling Flash
9 Custom Functions
Settings saved automatically
Package Inlcuding:
1x YN-E3-RT
1x Manual
2. YONGNUO YN-622C-TX E-TTL Wireless Flash Controller for Canon
Feature
The distance is 100m with 7 channels and the Max Sync Speed reaches 1/8000S.Can support TTL Ratio, USB Firmware Upgrade, AF Assist Beam Emitter.
It has 3Groups (A/B/C) and Sync mode: 1st-curtain, 2nd-curtain, High-Speed Sync(HSS)
Flash mode: GR(E-TTL(II), manual, Super Sync)/E-TTL(II)/Multi flash
Weight 82g and shutter release interface is 2.5MM Shutter release interface
Description
The distance is 100m with 7 channels and the Max Sync Speed reaches 1/8000S. Can support TTL Ratio, USB Firmware Upgrade, AF Assist Beam Emitter. It has 3Groups (A/B/C) and Sync mode: 1st-curtain, 2nd-curtain, High-Speed Sync(HSS) Flash mode: GR(E-TTL(II), manual, Super Sync)/E-TTL(II)/Multi flash Weight 82g and shutter release interface is 2.5MM Shutter release interface3. Yongnuo YN-E3-RT Flash Speedlite Transmitter for Canon 600EX-RT as ST-E3-RT
Feature
Power Source: 2 AA/LR6 alkaline batteries Ni-MH batteriesWireless flash shooting time: Approx. time: 10 continuous hours ** when using AA/LR6 alkaline batteries
Power saving: Power off after 5 min. of idel operation
Weight: Approx.110g(transmitter only, excluding batteries)
Description
Specification:This item YN-E3-RT Speedlite Transmitter is directly compatible with the Canon 600EX-RT flash, and a coming YongNuo YN-600EX-RT flash unit.
It includes all the features of the Canon ST-E3-RT, as well as extra features including
- AF Focus Assist light
- USB port for firmware updates
- Second curtain sync (in manual only)
- - Full GR Group Mode functionality has also now been added for pre 2012 model cameras
- Slave flash charge status does not stop other flashes from firing
YN-E3-RT features:
-Two-way 2.4G radio communication, fully compatible with Canon ST-E3-RT/600EX-RT
-Control up to 5 groups (15 units) of Speedlites
-15 Physical Channels, 1 Auto Channel, Up to 10,000 customizable photographer ID
-Transmission Range: 100M
-Multi YN-E3-RT can share slave flashes
-Display group/charge status of slave flashes
-Firmware can be upgraded via USB ( You need to buy extra USB Cable )
-High resolution Dot-Matrix LCD, Backlight for LCD/keys
-Fast lock mechanism
-Built-in AF assist beam emitter, buzzer
-Remote shutter release, Linked Shot ( (Need extra shutter cable for cameras released before 2012)
-Flash Mode: ETTL/M/Multi/GR 4 flash modes
-A/B/C/D/E 5 groups
-Supports 1st Curtain, 2nd Curtain (Only in M mode)
-Supports ETTL Ratio, Flash Exposure Compensation,Flash Exposure Lock, Flash Exposure Bracket, Modeling Flash
-9 Custom Functions
Suit for:
ALL Canon DSLR Camera with E-TTL II / E-TTL autoflash
Canon 600EX-RT
Canon ST-E3-RT Yongnuo YN-600EX-RT
NOTE: batteries and camera is not included.
4. YONGNUO YN560-TX for Canon Flash Transmitter Provide Remote Manual Power Control for YN-560 III Manual Flash Units Having Manual RF-602 RF-603 RF-603 II Compatible Radio Receivers Built In LF466
Feature
Zoom range: 24-105m,Shutter Interface: 2.5mm shutter interface,Compatible with YN-560III, RF-602, RF-603, RF0603II and 100 meters transmission RangeWith YN560 III flashes it offers its amazing flash power and zoom setting. This means, one can set YN-560 III flash output and zoom by group directly by the controllers big LCD. No more walking around to each flash, which is often not possible if the flash is on a high light stand or in a softbox.
Description
Remote Manual Power Control Zoom Head Control Remote Multi (Stroboscopic) Setting Large Clear LCD Screen Fast Setting Interface 16 Channels 2,4GHz 100M Range AA batteries x 2 (NOT included) Compatible with RF-602/RF-603/RF-603II Supports RF-603 /RF-603 II Wireless Shutter Release5. Yongnuo YN-622C Wireless ETTL Flash Trigger Receiver Transmitter Transceiver
Feature
Yongnuo First Wireless E-TTL Flash Trigger YN-622 C is Released now, it's designed for Canon Camera.Using Digital FSK 2. 4GHz frequency band with 7 channels, it has three mode, E-TTL ( II ), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 meters.
It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.
Suitable for camera: 1. The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D;2. The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II
Suitable for flash: Compatible ETTL Flash: ( It support wireless remote control through camera menu ) Canon 600EX ( RT ), 580EX II, 430EX II, 320EX, 270EX II, Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C ( Our yongnuo flash units don't support HSS Function ); Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.
Description
Main function:a), Support Full ETTL Pass-through function when on camera
Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi
Shutter Sync
b), High-speed Synchronous
The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed.
c), Remote Control Function
The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly.
d), Supporting mixed mode.
Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite.
e), Awaking function
When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. ( for those flash has wake up function )
f), Zoom Function
Zoom Automatic: length will be charnged depanding on the changes of lens.
Zoom Manual: Zoom length is within 24 - 105mm
Zoom Lock
g), Support Single-contact of camera and flash triggering ( the max. Sync. speed is 1/250s )
You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode.
h), Flash Fire Ratio with ETTL
You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver.
i), Support 2pcs AA batteries, ( 1.2v rechargeable battery ), Stand-by time is 60hours.
j), Dimension: 89.5 * 53 * 39MM, net weight is 78g.
Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash.
Package included:
2 x RF-622 C transceivers
1 x Instruction in English and Chinese
(Original Manufacturer Package)
6. YONGNUO YN560-TX Manual Flash Transmitter and Controller for Select Nikon Cameras
Feature
The front of the unit resembles a flash body. Its unlikely there will be any AF assist light behind the red lens though.The base of the YN560-TX shows a metal foot with locking pin and full Nikon ETTL contacts. Though these are likely only for the flash wake up feature as the RF-603 II etc have.
The YN560-TX will support all the major functions of the remote YN-560 III flashes in up to 6 individual Groups.
Powered by 2 AA batteries, the YN560 TX For Nikon very much resembles the body of the YN-560 III flash unit. Though its considerably narrower and would be much lighter.
Provided the specs have not changed, the YN560-TX should be compatible with any camera which has a standard hotshoe.
Description
Specification:
YN560-TX made specially for Yongnuo YN-560 III made after January of 2013 year,
but if you want to use it with our other Yongnuo flash speedlite,
you just need the transceiver of Yongnuo RF-602, RF-603, RF-603 II,
because YN560-TX has built-in wireless trigger system.
FSK 2.4G wirelss controller M / Multi Two mode Remote Control of Flash output and Zoom per group,
up to 6 groups, A/B/C/D/E/F Zoom range: 24-105m Shutter Interface: 2.5mm shutter interface Compatible with
YN-560 III, RF-602, RF-603, RF-603 II 16 Channels Large and Clear Screen,
user friendly interface 100 meters transmission Range Battery Type: AA*2 Stand-by time: 120hours
Features:
1, Wireless Triggering Function
a, If you use it with YN-560 III, you need to activate the group function of YN-560 III with YN560-TX before you use them together.
b, If you use it with other Yongnuo flash, like YN-560 II, YN-565EX, YN-568EX (Manual mode), you need a transceiver of Yongnuo RF-602, RF-603, RF-603 III.
2, Wireless Shutter Receiver Function You can mount YN560-TX into Camera, use shutter release cable (LS-2.5mm Series) to connect it with your camera,
and set RF-602, RF-603, RF-603 II in " transceiver " state, and then you can shutter release your camera and
you can also mount one flash into the hot shoe of flash traceiver, it also can be triggered synchronously.
Packaged included:
1 x YN560-TX Flash Controller
1 x Manual in English and Chinese
1 x Original box
7. YONGNUO Wireless ETTL Flash Trigger YN622C II with High-Speed Sync HSS 1/8000s for Canon Camera
Feature
The quick lock design, you can fasten the hot shoe of this flash trigger with your camera or flash.It supports 622C communication mode ( YN-622C and YN-622C-TX) and ( RF-605C, RF-603 II and YN560-TX ).
TTL mode, you can use YN-622C II, YN-622C, Canon version together, and when you use it with YN-622C-TX, it can be used as receiver.
Manual mode,you can use YN-560TX, RF-603 II, RF-605C as transmitter, and use YN-622C II as receiver.
It supports USB Firmware upgraded.
Description
Main Functions:The new upgrade version YN622C II can set to "622" or "560-RX" communication mode through the power switch, supports receiving the trigger signal of the YN560-TX/RF605(603 mode)/RF603(II) series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade.
N622C II E-TTL wireless flash trigger is a high performance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effects can be realized through setting your flash at 360 degrees. It design of transceiver, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups.
Remotely change the modes and parameters of the flash quickly when using the Canon EOS series DSLR cameras which supports external flash function , such as TTL ratio or manually set each group of flash output. Support high-speed sync, the max sync speed is 1/8000s*, Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter.
Suit for:List of Type A cameras: Canon EOS 1DX/EOS 5D Mark II/5DMark III/1Ds Mark III/1D Mark IV/1D Mark III/6D/7D/7DII/60D/70D/50D/40D/450D/ 500D Series/600D Series/700D Series/1000D Series
List of Type B cameras: Canon EOS 5D/10D/20D/30D/300D/350D/400D/1D/1D Mark II
Compatible ETTL flash list: (support wireless remote control through camera menu)
Canon 600EX(RT)/580EXII/430EXII/320EX/270EX(II)YongNuo YN600EX-RT /YN568EX(II)/YN565(II)/ YN468(II)/YN467(II)/YN465
430EX/550EX/580EX or other parts of the flash is not supported remote control via the camera menu, need to manually set the flash modes(parameters).
Package including:2 x RF-622C II transceivers
1 x Instruction in English and Chinese
1 x Original Yongnuo Box
8. Yongnuo YN600EX-RT II Wireless Flash Speedlite 2PCS + YN-E3-RT Wireless E-TTL Flash Trigger Transmitter For Canon Digital SLR Cameras 600ex-rt
Feature
YN600EX-RT II As Professional Creative High Guide Number Speedlite, Supports Ttl/M/Multi Flash and Can Realize TTL, Manual Flash, The Highest Shutter Synchronous Speed Is Up to 1/8000One YN600EX-RT II Can Respectively Receive The Wireless Signal Of Master Unit YN600EX-RT II,YN568EX II, YN600EX(II)-RT,580EX II, Command And Canon 7D/60D/600D Cameras Built-In Flash Wireless Signal
YN600EX-RT II Can Be Used As Master Unit To Trigger The YONGNUO And Canon Ex Series Flash (Excluding The Yn585EX),Supports 4 Channels, Realize Wireless TTL, Manual Flash And Stroboscopic Flash
Supports Optical Transmission And Wireless Radio Transmission Flash Shooting
YN600EX-RT II Can Used As Master Unit To Control The Flash Mode, Exposure Compensation, Flash Ratio, Number Of Stroboscopic And Stroboscopic Frequency
Description
Function:YN600EX-RT II
The YN600EX-RT II equipped with USB interface, supports firmware upgrade, you can download the upgrade firmware through the Yongnuo official website to upgrade the flash.
The YN600EX-RT II Supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm.
The YN600EX-RT II can be triggered by the camera set-top, PC synchronous trigger, wireless optical/radio remote trigger.
It just take 2 seconds at full output. Even if not use the brand new batteries, it just takes 3~4 seconds ultra-fast time to recycle; Besides, you can also use the external power supply to meet your higher requirement.
YN-E3-RT
Two-way 2.4G radio communication, fuly campatible with ST-3E-RT/600EX-RT 15 Physical Channels, 1 Auto Channel, Up to 10,000 customizable photographer ID
Transmission Range: 100M
Multi YN-E3-RT can share slave flashes
Display group/charge status of slave flashes
Firmware can be upgraded via USB
High resolution Dot-Matrix LCD, Backlight for LCD/keys
Fast lock mechanism
Built-in AF assist beam emitter, buzzer
Remote shutter release, Linked Shot (Need extra shutter cable for cameras released before 2012)
Flash Mode: ETTL/M/Multi/GR 4 flash modes
A/B/C/D/E 5 groups
Supports 1st Curtain, 2nd Curtain (Only in M mode), High speed Sync
Supports ETTL Ratio, Flash Exposure Compensation, Flash Exposure Lock, Flash Exposure Bracket, Modeling Flash
9 Custom Functions
Settings saved automatically
Package Inlcuding:
2 x Flash YN600EX-RT
1 x YN-E3-RT
2 x Original Box
2 x Battery case
2 x Flash Diffuser
2 x Flash color filter set (20pcs)
9. YONGNUO 560 TX Manual Flash Controller Transmitter LCD Wirelss Trigger Remote for YN-560 III YN560 IV,RF-602 RF-603 RF-603 II Nikon Camera YN560-TX
Feature
YN560-TX, Manual Flash Controller, made specially for YONGNUO YN-560 III version after January of year 2013,but if you want to use it with our other YONGNUO flash speedlite,you just need the transceiver of Yongnuo RF-602, RF-603, RF-603 II, because YN560-TX has built-in wireless trigger system.You can use it not only as flash controller function, but aslo use it as remote controller.
Remote Control of Flash output and Zoom per group, up to 6 groups, A/B/C/D/E/F
Use the wireless flash trigger kit to mount your flash to the receiver and remotely operate your flash from a distance of up to 100 meters. Great for group shots and studio photography to manipulate or eliminate shadows.
With large and clear LCD screen,easy to monitor the work status and all settings at a glance.
Description
This listing is for Nikon version. Item Type: Wireless Flash Controller Brand: YONGNUO Model: YN560-TX for Nikon Camera FSK 2.4G wirelss controller M / Multi Two mode Remote Control of Flash output and Zoom per group, up to 6 groups, A/B/C/D/E/F Zoom range: 24-105m Shutter Interface: 2.5mm shutter interface Compatible with YN-560 III, RF-602, RF-603, RF-603 II Channels: 16 Large and Clear LCD Screen 100 meters transmission Range Battery Type: 2 * AA Battery(not included) Condition: New Compatible Devices: Yongnuo YN 560III made after January of 2013 year. Yongnuo RF-602 transmitter, RF-603, RF-603 III transceiver.Yongnuo YN-560 II, YN-468 II, YN-565EX, YN-568EX in manual mode ( You need to use RF-602, RF-603, RF-603 II together. ) Package Details: 1 * YN560-TX N 1 * Chinese-English Manual Main Features: 1.Wireless Triggering Function a. If you use it with YN-560 III, you need to activate the group function of YN-560 III with YN560-TX before you use them together, ( more detailed, you can see our manual. ) b. If you use it with other Yongnuo flash, like YN-560 II, YN-565EX, YN-568EX ( Manual mode ), you need a transceiver of Yongnuo RF-602, RF-603, RF-603 III. 2. Wireless Shutter Receiver Function You can mount YN560-TX into Camera, use shutter release cable ( LS-2.5mm Series ) to connect it with your camera, and set RF-602, RF-603, RF-603 II in " transceiver " state, and then you can shutter release your camera and you can also mount one flash into the hot shoe of flash traceiver, it also can be triggered synchronously.10. Yongnuo RF-602 N 2.4GHz 100M Wireless Remote Flash Transmitter + 3 Receivers for Nikon D7200 D7100 D7000 D3300 D3200 D3000 D5000 D5100 D5200 D5300 D500 D700 D810 D60 D50,et.
Feature
1.RF-602 N uses 2.4GHz channel and FSK modulation,15 selectabh frequency channels.2.YONGNUO RF-602 :Flash sync speed is up to 1/250s. Maximum operating distance is up to 100 meters.
3.YONGNUO RF602 flash trigger:Support the flashgun wake-up function, (Wake up can only used in TTL Compatible flash)
4.YONGNUO flash trigger:Fire the flashgun through hot shoe part and fire the studio light through PC socket.
5. Wireless flash trigger:support M mode. This item is not compatible with SB-400.
Description
Now YONGNUO is provided all world wide DSLR camera remote plugs.
RF-602 N compatible for:
Nikon:D800S,D700,D300S,D2S,D1S,D200,D4,N90S,F5,F6,F100, F90, F90X,D3S.
Features and specifications:
2.4GHz band-16 selectable operating frequencies for eliminating interference
The RF-602 transmitter/receiver pair may be used to trigger all studio flash units
employing a standard phone jack or mini phone jack sync input
3.5mm mini phone jack and 6.35mm full size sync jack adapter are provided
Flash sync speed: 1/250s
Transmitter distance: 100m
Release: half-way press, full-way press
Time of shooting: up to 20, 000 times (CR2 lithium battery)
Receiver stand-by time: up to 45 hours(AAA battery)
Pasckage list:
1 * RF-602 N transmitter
3* receivers
1* N1 cable
1 * manual guide