Top tracer mppt for 2019
If you looking for tracer mppt then you are right place. We are searching for the best tracer mppt on the market and analyze these products to provide you the best choice.
If you looking for tracer mppt then you are right place. We are searching for the best tracer mppt on the market and analyze these products to provide you the best choice.
Best tracer mppt
1. SolarEpic MPPT 40A Solar Charge Controller 150V PV Input Tracer 4215BN
Feature
Negative Ground, Max 150V PV input.Advanced maximum power point tracking technology to optimize using the solar system.
Support 4 charging options: Sealed, Gel, Flooded and User-defined
Over temperature, over charging, PV and load short, PV (battery) revered, over current protection.
With supporting PC monitoring software and remote meter MT50(optional)
Description
If you need to monitoring the solar system or setting the controller, you may have to buy a MT-50 remote meter separately.Description
The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery.
The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery.
At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.
The battery charging process has been optimized for long battery life and improved system performance.
The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory.
Technical Data
Nominal system voltage: 12VDC / 24VDC Auto work
Rated charge current:40A
Rated discharge current: 20A
Max. solar input voltage:150VDC
Max. PV input power:520W(12V battery) 1040W(24V battery)
Self-consumption*:50mA(12V) 27mA(24V)
Dimension:302.5mm x 182.7mm x 63.5mm
Mounting hole size:4.7
Power cable:25mm2
Weight: 2.9kg
2. EPEVER MPPT Charge Controller 10A Solar Panel Charge Controller Mppt 100V PV Input Negative Grounded Solar Regulator 12V/24V Auto with LCD Display for Gel Sealed Flooded Lithium Battery
Feature
MPPT Charge Controller: has advanced MPPT technology High tracking efficiency no less than 99.5% Peak conversion efficiency of 98% Accurately recognizing and tracking of multiple power pointTracer AN Solar Controller: Multi-function blackligh LCD displays system information intuitively, dynamically display all the operating datas and working condition, Added Features (than Tracer A): Blacklight LCD Display, Common Negative Ground and Support lithium Battery.
Solar panel controller support PC software and remote meter MT-50, be convenient for real-time data viewing and parameter setting. Battery temperature compensation function, real-time energy statistics function.
12V/24VDC automatically identifying system voltage.User programmable for 3 battery types: sealed, gel and flooded. Multiple load control method, automatic limit for maximum PV input power, ensuring no overload, more safty for using
More Safe Guarantee with Y-SOLAR: 2-years warranty and professional after-sale service within 24 hours
Description
Features:Advanced MPPT technology
High tracking efficiency no less than 99.5%
Peak conversion efficiency of 98%
Ultra-fast tracking speed
Accurately recognizing and tracking of multiple power point
Multi-function LCD displays system information intuitively
User programmable for battery types, load control etc.
3-Stage battery charging algorithm
Common positive grounding design
RS485 port with industrial standard MODBUS open architecture
Fully programmable function via PC software or remote meter
Electronic protections:
PV reverse polarity protection
PV short circuit protection
PV over current alarm protection
Battery overcharge protection
Battery over discharge protection
Battery reverse polarity protection
Load short circuit protection
Load overload protection
Controller overheating protection
Package List:
1 x Tracer 1210A Solar Charge Controller
1 x User Manual
3. Tracer MPPT Tracer1210RN Solar Charge Controller Regulator 12/24V INPUT 10A
Feature
MPPT technology; Excellent thermal design and nature air cooling; CE certificate;Peak conversion efficiency of 97 %; High Tracking efficiency of 99%; Several seconds tracking speed;
Very fast Sweeping of the entire I-V curve; 4- Stage charge with PWM output; Temperature compensation function
Full power output in ambient temperatures up to 45 degree; Sealed, Gel, Flooded battery type optional; ON/OFF, Dusk to dawn, 1-15h timer
Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST; Max PV input power 130W for 12V system, 260W for 24V system
Description
Why we recommend buy MPPT Solar Controller?
MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%- a tremendous benefit. Even if the excess panels are purchased, benefits are realized in a Grid Tie system because more electricity can be sold back to the grid. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance.
Specification:
* Model No: Tracer-1210RN
* Nominal System Voltage: 12VDC | 24VDC Auto work
* Rated Battery Current: 10A
* Maximum Battery Voltage: 32V
* Max. Solar Input Voltage: 100VDC
* Max. PV input power: 12V/ 130W 24V /260W
* Self-consumption: <10mA(24V)
* Charge Circuit Voltage Drop: <=0.26V
* Discharge Circuit Voltage Drop: <=0.15V
* Communication: TTL232 / 8pin RJ45
Environmental Parameter:
* Working temperature: -35 to +55 C
* Storage temperature: -35 to +80 C
* Humidity: 10%-90% NC
* Enclosure: IP30
Mechanical Parameter:
* Dimension: 156 x 97 x 68 / mm
* Mounting holes: 147 x 60 / mm
* Mounting hole size: 5
* Terminal: 4mm
* Weight: 0.55kg
4. ALLPOWERS 30A MPPT Solar Charger Controller Regulator 100V Input Tracer for Solar Panel Battery with LCD Display 12V/24V
Feature
PROMOTION for 3 DAYS,Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%. High quality components, perfecting system performance, with maximum conversion efficiency of 98%.12V/24V DC automatically identifying system voltage;
Multiple load control modes: manual mode, light ON/OFF, light On+Timer and test mode
Support 3 charging preprogram option: Sealed, Gel, Flooded
Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters settings. Note:communication port is not available now.
Description
"Your Satisfaction is our Highest Priority", contact us firstly if you have any questionThe product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate.
Features:
- Automatically detects 12V/24V DC system voltages
- Innovative MPPT technology with high tracking efficiency up to 99.5%
- Perfecting system performance, with maximum conversion efficiency of 98%
- Reliable automatic limit function of maximun PV input power, ensuring no overload
- Ultra-fast tracking speed and guaranteed tracking efficiency
- 3 charging preprogram option: Sealed, Gel, Flooded
- Die-cast aluminum design for heat dissipation
- LCD panel display design, dynamically displaying tool's operating data and working condition
- Real-time energy statistic function
- Support software upgrade
Technical Data:
Nominal system voltage: 12VDC / 24VDC Auto Work
Rated charge current: 30A
Rated discharge current: 30A
Battery Input Voltage: 8V~32V
Max. PV Open Circuit Voltage: 60~100V
Max. PV Input Power: 390W/12V; 780W/24V
Self-consumption: 20mA(12V) 16mA(24V)
Discharge Circuit Voltage Drop: 0.18v
Size: 22*17.9*5.3cm/ 8.6* 7.04*2.08inch
Weight: 1432g/ 50oz
Note:communication port is not available now.
Warranty: 18-month product guarantee from ALLPOWERS
5. SolarEpic 40A MPPT Solar Charge Controller 100V Input Tracer an Series 4210AN with Display
Feature
Upgraded version 4210AN Series, Negative Ground and compatible with Lithium(LiFePO4) Battery Charging.Compatible with 12V or 24V battery system. High tracking efficiency up to 99%
Multiple load control modes: manual control, light ON/OFF, light On+Timer and test mode.
Die-cast aluminum design and nature cooling
Four battery type options:Sealed, Gel, Flooded, and USER define
Description
FeaturesAdvanced MPPT technology
High tracking efficiency no less than 99.5%
Peak conversion efficiency of 98%
Ultra-fast tracking speed
Accurately recognizing and tracking of multiple power point
Multi-function LCD displays system information intuitively
User programmable for battery types, load control etc.
3-Stage charge with PWM output
Common positive grounding design
RS485 port with industrial standard MODBUS open architecture
Fully programmable function via PC software or remote meter
Electronic protections:
PV reverse polarity protection
PV short circuit protection
PV over current alarm protection
Battery overcharge protection
Battery over discharge protection
Battery reverse polarity protection
Load short circuit protection
Load overload protection
Overheating protection
Technical Data:
Nominal system voltage:12/24VDC auto work
Rated charge current :40A
Rated discharge current: 40A
Battery input voltage range: 8-32V
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25 environment temperature)
MPP voltage range:V(BAT)+2V72V
Max. PV input power:520W(12V) & 1040W(24V)
Power terminals:#6 AWG(16mm2)
6. EPEVER 20A MPPT Solar Charge Controller Tracer A 2210A + Remote Meter MT-50 Solar Charge With LCD Display for Solar Battery Charging
Feature
99.5% Efficiency MPPT20A Charge Controller We Supply Free System Design and Technical Support Solar Off-Grid SystemAutomatic System Voltage Recognition (12/24 V) Auto-saving function: two voltage disconnect levels
High tracking efficiency no less than 99.5% -Positive Ground 12V/260W,24V/520W
Multi-function LCD displays system information intuitively If you need with PC soft & MT50 for real-time monitoring recommend eLOG01 ASIN: B073DXMDZL
Gel, Sealed and Flooded battery type optio Remote Cable 2 M
Description
EPEVER 20A MPPT Solar Charge Controller Tracer A 2210A Solar Charge With LCD Display
Product Specification
Multiple load control modes: manual control, lighting ON/OFF, light On+TimerAdvanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
Wide MPPT operating voltage range.
12/24VDC automatically identifying system voltage.
LCD display design, dynamically displaying tool's operating data and working condition.
Available for PC monitoring and external display realizing real-time data checking and parameters setting.
Features
Ultra-fast tracking speedAccurately recognizing and tracking of multiple power point
User programmable for battery types, load control etc.
Common positive grounding design
Rated charge current: 20A
Max.PV input power: 12V/260W,24V/520W
Battery voltage range: 9V~32V
Max.PV open circuit voltage: 100VDC
Electronic protections
PV short circuit protectionPV reverse polarity protection
Battery over voltage protection
Battery over discharge protection
Battery reverse polarity protection
Load overload protection
MT-50 Features
Automatic identify the controller, and display the type, model and relevant parameter dataLarge-screen multifunction LCD displays all the operational data and system working status
Real-time energy statistics recording
Longer communication distance based on RS485
More powerful function Via MT50
Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time ControlBattery type selection: Gel, sealed, flooded and USER type
Package List:
1 x Tracer 2210A Solar Charging Controller1 x MT-50
2 x User Manual
7. SolarEpic Battery Temperature Sensor and Monitoring Adapter RS485 to USB fit for Tracer MPPT
Feature
Remote Temperature SensorUSB to RS485 adapter used to connect the MPPT charger and PC
Fit for Tracer BN/A series MPPT charge controller
Description
You are buying the two cables.1. Remote Temperature Sensor
Model: RTS300R47K3.81A
Acquisition of battery temperature for undertaking
temperature compensation of control parameters
Length: 3 M
2. USB to RS485 Converter Adapter
Model: CC-USB-RS485-150U
This adapter is used to monitor each controller on the
network using Solar Station PC software and update the firmware.
8. EPEVER Battery Temperature Sensor and Monitoring Adapter RS485 to USB Fit Solar Charge Controller
Feature
Remote Temperature Sensor for Epever mppt controller------ Length: 3M(118 in)USB to RS485 adapter used to connect the MPPT charger and PC ----------Line length: 1.5m(59 in))
Fit for Tracer BN/AN series MPPT charge controller
EPever Communication Cable CC-USB-RS485-150U USB To PC RS485 For Viewstar And TracerAN/BN Series Solar Charge Controller
mppt usb to rs485 adapter*1+mppt tempure sensor*1
Description
Package include
1. Remote Temperature Sensor
Model: RTS300R47K3.81A
----------Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M
2. USB to RS485 Converter Adapter
Model: RS485-150U
--------This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.
9. 40A MPPT Solar Charge Controller +MT50 Monitor+Temp.Sensor Package Tracer 4210AN 100V Solar Panels Power Input Support Lithium Battery Charger Regulator Negative Ground
Feature
2018 New Released TracerAN 40A MPPT Solar Charge Controller Using innovative MPPT technology with high tracking efficiency up to 99%, the charge controller efficiently charges your off-grid solar battery bank safely day in, day out.New Added Features: 1. Blacklight Display 2.Common Negative Ground 3. Compatible with lithium-ion Batteries. Configurable with multiple battery types (Gel, Sealed, Flooded and Lithium), auto-detects between 12v and 24v system designs, multifaceted safety systems to prevent short circuits, overloading, overheating and polarity issues.
3 stage charging for maximum battery life with intelligent power saving and temperature compensation and operates on multiple load control modes such as manual, light ON/OFF and On+Timer.
Program your controller to your custom set-up via PC software, and monitor from the comfort of your desk with the MT50 remote metering feature.
100% Money Back Guarantee: If you encounter any issues with your MPPT charge controller, you can rest assured because all of our products are covered by Amazon's legendary A-Z Guarantee!
Description
Why buy together: We find that 70% of our customer buy the MT50 Monitor and Temperature Sensor separately after bought the Controller. that's why we release this kit, bring more convenience to our customer.
In the Package:140A MPPT Solar Charge Controller, 1MT50 Remote Monitor, 1Temperature Sensor
Set up and control your solar PV array system with ease! The2018 New ReleasedTracer 4210AN is a Maximum Power Point Tracking Charge Controller Based on common negative design, also known as an "MPPT Controller" and features up to99%tracking efficiency. In the event of system faults or other errors, the40A controllercan self-diagnose itself with error codes, which you can view remotely or on the large Blacklight LCD display along with system status and working conditions. Like many other MPPT Charge Controllers, the Tracer features 3-stage charging and is compatible with sealed, flooded, lead-acid and lithium-ion batteries. In addition, you may define your own battery type via the USER define mode.
Features:
High-Quality Components
Compatible with lead-acid and lithium-ion batteries
Real-time energy statistics
Overheating power reduction
Multiple load work modes
Electronic Protections:
PV Over Current/Power, Short Circuit, Reverse Polarity
Night Reverse Charging
Battery Reverse Polarity, Over-Voltage, Over Discharge, Overheating
Controller Overheating
Lithium Battery Low Temperature
Load Short Circuit, Overload
TVSTVS High Voltage Transients
Specification:
Rated Charge/Discharge Current:40 Amp
Battery Voltage:8~32V
Max. PV input Voltage:100V
Max.PV Input Power:520W/12V 1040W/24V
Grounding: Common Negative
LCD Backlight Time: 60S (Settable)
Terminal: 6~8 AWG
10. SolarEpic MT-50 Remote Meter LCD Display fit for Tracer BN Series MPPT Charge Controller NOT FIT for RENOGY & HQST MPPT
Feature
Automatic identify and display the type, model and relevant parameter data of controllersReal-time display the operational data and working status of the connection devices in digital, graphic and textual forms
Direct, convenient and rapid operation of six navigation function keys
Both data and power flowing on the same lead, no need external power supply
Please be noted that this MT-50 is NOT compatible with MPPT sold by other vendor
Description
This MT-50 remote meter DOES NOT work with HQST / Renogy Commandar MPPT chargersThis unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar.
And it's NOT compatible with RN series MPPT charge controller.
Description
MT-50, a new-generation remote display for Tracer xxxx BN controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of solar controllers.
Technical Data
Faceplate dimension:9898 mm / 3.863.86 inch
Frame dimension:114114 mm / 4.494.49 inch
Connector type: RJ45
Meter cable:Standard 2m,Max 50m
Ambient Temperature: -20C -- +70C/-4F -- 158F