Top pc case id cooling
If you looking for pc case id cooling then you are right place. We are searching for the best pc case id cooling on the market and analyze these products to provide you the best choice.
If you looking for pc case id cooling then you are right place. We are searching for the best pc case id cooling on the market and analyze these products to provide you the best choice.
Best pc case id cooling
1. RSHTECH Hard Drive Enclosure USB 3.0 to External Hard Drive Docking Station for 2.5inch/ 3.5inch SATA I/II/III /HDD or SSD Case Support UASP & 8TB Drives (Black)
Feature
6Gbps Data Transfer Rates: Serial ATA bus up to 6Gbps Signal bandwidth for fast storage backups, high Speed USB 3.0 Cable, UASP (USB Attached SCSI Protocol) support for even faster performance. ASM1153E master chip makes the transmission more stable.Superior Heat Dissipation: Easily slide off upper case, Portable enclosure with hollow design not only can make hard drive enclosure looks good, but it also can keeps the drive cool, avoiding too hot if running for a few hours.
Multiple Protection: Plug and Play, supports hot-swap. Using ASM1153e master chip makes lower power consumption, more stable transmission; integrated safeguards prevent over voltage, leak currents, short circuits and peak voltage, guaranteed safer data transfer and access.
Support Automatic Sleep Function: Automatic sleep and spin down mode, power saving and sustainable, effective protection of your drive.Entering sleep mode after 10 minutes of data access inactivity.
Compatibility: Support all 2.5 or 3.5 inch SATA I/II/III /HDD SSD up to 8TB.hard drives. Compatible with Windows 2000/XP/ VISTA/ Windows 7/ 8 /10/ Linux/ Mac 9.0 or above.
Description
The RSHTECH SATA Lay-Flat Docking Station support the direct insertion of connect to 2.5"/3.5" SATA Hard Drives. You can enjoy the lightening speed of USB 3.0 to quickly transfer files up to 6 Gbps!
Features:
Switch Design: Light press to turn on, long press 3 seconds to turn off power supply. Effectively protect the hard disk from damaging.
Hot-swappable: Plug and play, no drivers needed;
The SATA interface of the drive enclosure supports UASP accelerated transmission protocol (UASP requires UASP capable host system).
Technical:
The data transfer port is USB 3.0 (up to 10x as fast as USB 2.0).Transfer Rates Up to 5 Gbps w/USB 3.0 and Up to 480 Mbps w/USB 2.0
Made of safe and high quality ABS plastic makes this enclosure solid and sturdy.
Warm Remind:
If it happens the situation which the hard disk does not allow accessand we are providing the following suggestions:
1. You can use the other computer to see if this will happen;
2. If it is used for desktop computers, then the USB3.0 cable must be plugged in the host behind the computer interface.
Package Contents:
1x 2.5/3.5 Inch SATA Hard Drive Enclosure
1x 12V/2A Power Adapter
4x Fixed Hard Drive Screws
1x USB 3.0 Data Cable
1x Instruction Manual
Note:
- The bottom of the hard disk case is provided with a fixed 3.5 inch hard disk screw hole, and the hard disk is inserted more firmly and is more convenient to carry.
- If you need to install a 2.5" hard drivethe screw holes will not line up on the 2.5" hard drive, maybe need to use something to fixed it in place. (Such as: tape)
- In order to avoid data loss, please click "Safely Remove Hardware" icon on your PC first then unplug it.
- LED light on the top indicates Power and Activity status.
- One-Year limited warranty.
2. Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
Feature
Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tubeMandrels: Includes Mandrels for 45/90/180/360 degree bends
Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
Recommended use of soapy water assists with tube insertion and tube heating
Warranty: 2 Years
Description
Bending CL-W093-AL00BL-A B01BX3EZUI
Product description:
Thermaltake introduces an essential tool for PETG users, the Pacific Hard Tube Bending Kit. Designed for users looking to create bends using 16mm PETG tube, each kit contains Mandrels for 360 Degree, 180 Degree, 90 Degree and 45 Degree bends. Silicone insert supports tube during the bending process to prevent kinks and promotes smooth bends while keeping inner tube wall structure. Finish up your masterpiece with the professional Thermaltake pipe cutter for a near perfect beveled cut every time. Each mandrel is designed to be mounted to a flat surface like wood for bending. Prior to using the silicone insert, Thermaltake recommends using soapy water or other techniques to lubricate the tube prior to heating and bending.
The new hard tube bending tools offered by Thermaltake are especially designed for ID 12mm x OD 5/8 (16mm) hard tube and provide everything makers needed when considering loop planning. Available in various angles, the laser-marked mandrels are made from solid aluminum and are anodized for maximum durability. In addition, the cutter and reamer guarantee a clean and precise cut by eliminating all the hassles during the modding process.
P/N: CL-W093-AL00BL-A
Compatibility:ID 12mm OD 5/8(16mm) hard tube
Material
Mandrels Aluminum
CordSilicone
ReamerPlastic + Steel
Kit Contents
45 & 90 Mandrels x 1
180 Mandrels x 1
360 Mandrels x 1
Cutter x 1
Silicone cord x 1
Inside-outside Reamer x 1
3. Cooler Master MCW-L3B3-KANN-01 MasterBox Lite 3.1 mATX Case with Dark Mirror Front, Acrylic side panel, Customizable trim colors
Feature
Dark Mirror front panelCustomizable trim colors
Full black coating
Transparent side panel. Supports up to 3 fans and Water-cooling
Cable Routing- Behind Motherboard Tray-9.55mm(0.3 inch) - 15.55mm(0.6 inch)
Description
The MasterBox Lite 3.1 mATX Case is your straightforward option for your PC build that doesn't ignore good looks, customization, or performance. A sleek Dark Mirror front panel and three custom trim colors (included in the box) offer a great first entry point for customization. The interior features a nice black coating that allows you to create an great and clean build. Additionally, it comes with an edge to edge transparent acrylic side panel to show your internal components. And with support for up to 3 cooling fans and a water-cooling system, we ensure your performance will not suffer.4. ROSEWILL ATX Mid Tower Gaming Computer Case with Tempered Glass and RGB LED Lighting, Support Up to 360mm GPU, 360mm Liquid-cooling,4x 120mm RGB Computer Case Fan Pre-installed and Remote Control
Feature
The Coolest RGB LED Effect for Gaming Computer: The RGB gaming pc case with tempered glass demostrates the extraordinary RGB LED lighting effect with a remote controller. It allows user to adjust the RGB effects as solid LED color and Pre-programmed color modes (Rainbow, Gradient, Blade and Breath.) to show off your case.Tempered Glass Design to Show Gaming Desktop: The gaming case with tempered glass is surrounded with 3 sides of tempered glass to display your gaming computer desktop. ROSEWILL CULLINAN MX is a high quality tempered glass mid tower ATX computer case which is surrouned from the front and 2 sides. That makes ROSEWILL CULLINAN MX an elegant and misterous computer gaming case.
Optimized Ventilation & Generous Expansion: With 4x pre-installed fans, including three 120 mm blue LED case fans in the front and one 120mm fan at the rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers are also allowed to install up to 170mm CPU Cooler and 360 mm Water-cooling Radiator in the front, 280 mm Liquid-cooling Radiator on top.
Quite Operation & Top-Mounted Multiple I/O Ports: With the 5mm tempered glasses all around and quiet operated fans, this gorgeous computer case aims to provide the quiest level of computer system for its users. Also the top-mounted I/O ports offer the excellent convenience for gamers.
Huge Space & Excellent Cable Management: The RGB ATX mid tower computer case supports up to 3 x 120 mm Fan/ 360 mm water-cooling radiator in the Front, 2 x 140 mm fan/ 280 mm liquid-cooling radiator on top, 1 x 120 mm case fan at the rear, 3 x 80 mm fan on the PSU shroud.
Description
ModelBrand: Rosewill
Model: CULLINAN MX
Details
Type: ATX Mid Tower
Color: Black
Case Material: Steel / Plastic / Tempered Glass
With Power Supply: No
Power Supply Mounted: Bottom
Motherboard Compatibility: Micro ATX / ATX / Mini-ITX
Side Panel Window: Temper glass side window
Expansion
External 5.25" Drive Bays: 0
Internal 3.5" Drive Bays: 4/0
Internal 2.5" Drive Bays: 5/9
Expansion Slots: 8+2
Front Panel Ports
Front Ports: 2 x USB 3.0 / 2 x USB 2.0 / Audio In/Out / Fan Speed Control
Cooling System
80mm Fans: 3 x PSU Shroud (optional)
120mm Fans: 3 x Front (pre-installed)1 x Rear (pre-installed)2 x Top (optional)
140mm Fans: 2 x Front (optional)2 x Top (optional)
Dimensions & Weight
Max GPU Length Allowance: 360 mm
Max CPU Cooler Height Allowance: 170 mm
Dimensions (H x W x D): 18.98" x 8.85" x 17.13"
Weight: 20.28 lbs.
Additional Info
Features: NOTICE: Please make sure your motherboard equipped with on-board USB 3.0 socket before purchasing.Tempered Glass Front Panel and Side PanelsI/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio In/Out, Fan Speed ControlPre-installed 4 x 120 mm RGB LED Fan with Remote ControllerSupport up to 3 x 120 mm Fan/360 mm Water-cooling Radiator in the front, 2 x 140 mm Fan/280 mm Wate
5. Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK
Feature
Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case.Appearance: Brushed plastic with an aluminum appearance; Stealth interior: hidden PSU / hidden HDD
Cooling: Extreme cooling capacity; 2 included Phanteks' premium fans ; The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management
Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations; Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.)
Dimension:235 mm x 535 mm x 550 mm (W x H x D)
Removable dust filters for easy maintenance. Pre-installed cable management tools behind the motherboard tray that can be fastened and released.2x USB 3.0, 2x USB 2.0, microphone, 3.5mm audio jack
split-window design (PH-ES614P) and PSU cover
Description
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibility, the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has multiple radiator support, removable SSD bracket, closed HDD panel, and Velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.6. Corsair Air Series AF120 LED Quiet Edition High Airflow Fan Single Pack - White
Feature
Fan Size: 120mm x 25mmNoise (dBA): 25.2 dBA
Translucent, frosted fan blades and White LEDs for a dramatic effect
Airflow (CFM): 52.19 CFM
Static Pressure (mm/H2O): 0.75 mm/H2O
Power Draw (at +12V) .40 A
Available in single or twin packs.
Description
Superior cooling performance and LED illuminationCorsair Air Series LED high airflow PC case fans combine efficient, low-noise airflow with striking LED lighting. The custom-molded blades are designed for high-volume air delivery with less noise and turbulence than typical case fans. They're translucent, with a frosted texture, so the light from the four LEDs adds a dramatic effect.Tuned for high-airflow, large volume coolingFor high restriction areas like hard drive cages or in other tight spaces where there's less air volume, check out our Air Series SP models of high static pressure fans.Better performance than standard case fansAir Series AF fan models are designed to outperform standard case fans. The blades are custom-molded for optimal airflow, and they're ultra-thin for less noise and turbulence. The sleeved bearing system reduces vibration for quiet operation.Package ContentsAir Series AF120 LED Quiet Edition High Airflow 120mm FanMounting ScrewsWarranty leaflet7. SilverStone Technology Mini-ITX Slim Small Form Factor Computer Case with Handle ML08B-H
Feature
Highest performance capability in super slim form factorOptional models includes removable carrying handle (ML08B-H, ML08B-HW)
Support graphics card up to 13 inches
Mini-ITX motherboard & SFX PSU compatible
Independent expansion slot design for easy assembly
Tool-less drive cage design
Fits in nearly any environment with horizontal or vertical orientation
Description
Based on the excellent RAVEN Z RVZ02 chassis, the Milo ML08 is a super slim Mini-ITX console case with highly capable accommodations. With a volume of only 12 liters, this case is small yet easy to assemble when compared to other slim cases in the same class. There is plenty of room for a powerful graphics card up to 13 inches in length while tool-less drive cages make assembly quicker than ever. With clever space utilization and engineering, two major heat sources are separated via the chassis' main chamber so CPU and graphics card can each have their own airflow path. Despite its diminutive size, the ML08 is a remarkably versatile case that can be used anywhere from being a compact desktop workstation (in vertical orientation) to a living console or HTPC (in horizontal orientation). There are even optional models of ML08 with integrated handle, making them effortlessly portable and perfect for any slim PC build.8. Phanteks Pro M Tempered Glass Case, Black, PH-ES515PTG_BK
Feature
Brushed aluminum look. Clean interior - Hidden PSU& HDDs. Tempered Glass PanelEasy accessibility to fans and dust filters.
Removable Optical Drive Cage. Offset Radiator Bracket (No Conflicts between radiator and Memory). Reservoir Mounts and Pump Slots
2x USB 3.0, Headphone, Mic, Reset. 1x SSD Bracket Included. 2x Phanteks Premium 140mm fans. Removable HDD Cages. Magnetic Dust Filters.
Compatible with Phanteks RGB LED Strips and RGB Motherboards. Full Size PSU. Modular HDD System (requires PH-HDDKT_02). Easy Radiator Installation. Reservoir Mounts
Description
Phanteks' new Enthoo Pro M variant will now include a full Tempered Glass side panel. System builders and water-cooling enthusiasts can now showcase their build. The Enthoo Pro M with Tempered Glass side panel features the new HDD mounting system, our innovative radiator bracket and pump mounting locations.9. CORSAIR CARBIDE AIR 540 ATX Cube Case, High-Airflow - Black
Feature
Dual-chamber Direct Airflow Path design for outstanding cooling potentialClever, space-saving design still offers lots of internal volume; Case Windowed :Acrylic
Includes three High Performance Air Series AF140L fans for better, quieter cooling
Tons of expansion room for high performance air cooling and liquid cooling
Full side panel window
Front dust filter.Compatibility-ATX, Micro ATX, E-ATX, and Mini ITX compatible.
Black interior
Cable routing cutouts with rubber grommets