Top patch magnets for 2019
If you looking for patch magnets then you are right place. We are searching for the best patch magnets on the market and analyze these products to provide you the best choice.
If you looking for patch magnets then you are right place. We are searching for the best patch magnets on the market and analyze these products to provide you the best choice.
Best patch magnets
1. Zicome Name Badge Magnets, Magnetic Name Tag Holders, Set of 12 (24 Pieces)
Feature
12 Sets/Pairs (24 Pieces) of name/ID badge magnetic backs made of neodymium magnets instead of needles3M Peel-off-and-Stick adhesive can stick tightly to most badge materials
Front magnetic plate has adhesive backing to easily hold name tag, badge or ID
Dimensions: 44mm (1.75") long by 12mm (0.5") wide
Perfect for office, workplace, law enforcement, school, conferences and crafts.No More Holes on Your Valuable Shirts
Description
Zicome 12 Magnetic Name Badge Tag ID Holder (Silver) - No More Holes on Your Valuable Shirts2. totalElement Magnetic Name Tag/ID Badge Holder, Strong Fastener with 3M Adhesive on Front Plate (Silver) 10-Pack
Feature
Strong, safe and secure way to attach and show credentials without damaging clothing or uniformFront magnetic plate has adhesive backing to easily hold name tag, badge or ID
Dimensions: 44mm (1.75") long by 12mm (0.5") wide
Simple multi-purpose design works for arts & crafts, hanging signs and posters, and attaching other accessories to clothing
10 Sets of Badge Holders Included. Name Tags/Badges Sold Separately.
Description
STRONG, VERSATILE AND CONVENIENTtotalElement magnetic name tag holders are perfect for securely holding your name tag, badge, ID or other credentials - even your corsages, pins, medals and brooches - without damaging your clothing or uniform.
Plus, these magnetic fasteners can also be used on the fridge or file cabinet to hang posters, signs and artwork; to hold pieces and parts together in arts & craft projects; to secure tarps, drapes and other wall coverings and for many other uses.
SIMPLE AND EASY TWO-PIECE DESIGN
These strong, lightweight ID badge holders are designed in two pieces: the inside or anchor bar and the outside bar, held together by two small but powerful Neodymium magnets.
The inside or anchor bar can be easily placed inside your jacket or lapel, with the front or outside bar attached on the outside of your jacket or lapel. The outside bar also features an adhesive front section to easily attach your name badge or name tag on to.
SMART, SENSIBLE AND SAFE
These fasteners are preferred over other forms of badge attachments because they do not damage fabrics; and they do not require you to insert a pin through your clothing or uniform to wear a name tag.
These strong holders also provide a safer alternative to wearing a lanyard around your neck with your ID attached in a plastic sleeve. This is because lanyards often swing outward and can get caught when you move or lean over, posing a safety risk to you.
100% CUSTOMER SATISFACTION GUARANTEE
All totalElement magnetic name badges are covered by a 100% Customer Satisfaction Guarantee. If for any reason you are not happy with your purchase, simply contact us and we'll make it right. So when you're ready to show off your name badge or ID, try one of these strong magnetic badge holders from totalElement. And see why you'll be proud to put your name on it!
3. Applied Magnets 10 Sets Strong Steel Name Badge Magnets - Magnetic Name Tag Holders with 2 Neodymium Magnets
Feature
TOP QUALITY - 10 Sets/Pairs of Premium quality Magnetic Name Badge Holders. Size: 1.76" long x 0.5" wide x 0.25" thickness.EASY TO USE - Each Set of Badge Holder includes 2 pieces: Steel back plate with 2 strong rare earth neodymium magnets and adhesive front plate.
STRONG - Strong neodymium magnets hold badge without damaging clothing or uniform ! Never use clips or pins again !
USEFUL - Great for office, school, conferences, trade shows, arts and crafts.
SATISFACTION GUARANTEED - We're confident that you'll love our Name Badge Magnets, which is why we're happy to include a 100% satisfaction, 30-day guarantee with your Name badge order.
Description
Name Badge Magnets - Magnetic Badge Holder with Steel Back PlateNever use clips or pins to hold that badge to your garments again! Our name badge magnets - magnetic badge holders will not damage your clothing and are easy to use!! One steel plate with 2 round rare earth neodymium magnets. One plated steel plate with pressure-sensitive foam tape. Each with approximate pull force of 4 lbs. Imprinted On Back With: Caution - Magnetic Device
Neodymium magnets are the world's strongest magnets. Applied Magnets offers the highest quality Neodymium magnets with consistent performance and lowest price. Our Neodymium magnets are designed and manufactured to meet stringent quality standards using the latest technology.
WARNING:
Very strong magnets.
Fingers could be severely pinched between two or more magnets.
KEEP OUT OF REACH OF ALL CHILDREN. THIS IS NOT A TOY.
DO NOT ingest or inhale.
DO NOT place in nose, mouth or any other part of the body.
Swallowed magnets can stick to intestines causing serious injury (NECROSIS) or even DEATH.
Seek immediate medical attention if any magnet(s) are swallowed or inhaled.
Neodymium Magnets are BRITTLE.
They can SHATTER, CRACK, PEEL or SPLINTER if allowed to snap together or slam into a metal object.
Broken magnets can be Extremely SHARP.
MAGNETIC MEDIA AND ELECTRONIC EQUIPMENT HAZARD.
KEEP AWAY from PACEMAKERS AND INTERNAL MEDICAL DEVICES.
Magnetized materials are REGULATED FOR AIR TRANSPORT and are considered a HAZARDOUS MATERIAL.
Neodymium magnets will lose their magnetic properties if heated above 175F (80 C).
Do Not cut or drill Neodymium Magnets, there is a both a fire and fracture hazard and the dust is toxic.
4. Set of 100 - CMS Magnetics Name Badge Magnets Made of Neodymium Magnets 3MAG
Feature
Rectangular name badge attachments made with Neodymium Magnets instead of pins, so no more holes in your valuable shirtsStainless Steel back plate will not rust and is suitable for use in all environments
3M peel-and-stick adhesive can stick tightly to most badge materials
Strong Holding Power - 11 lb holding power per set
Metal insert inside the plastic bar for added strength and durability
Description
This listing includes a box of 100 badge magnets which replaces regular safety pin style badge attachments. The magnets do not damage clothes in any way and will make your clothes last much longer than repeated use of pins.Each badge magnet includes 3 magnets affixed onto a navy blue plastic bar, and also has a metal insert inside of the plastic bar to strengthen the bar for use in demanding applications. A stainless steel plate with 3M adhesive pre-applied comes with each magnet and the strong 3M adhesive will hold to most of the materials tightly and securely. The peel off tab on the liner makes the task of attaching the backplate to the badge as easier than ever.
The back plate is made of stainless steel and will never rust. Perfect for use in wet, humid, or coastal areas without having to worry about rust staining your clothes.
The badge magnets are arranged in two layers, with each layer containing 50 sets for a total of 100 sets.
5. Applied Magnets 10 Name Badge Magnets - Magnetic Name Tag Holders with Three Neodymium Magnets
Feature
10 Sets of Premium quality Magnetic BadgesEach Badge has 3 strong rare earth neodymium magnets
1.76 inch Magnetic Badge Holder / Badge Magnets, Blue Plastic Back Plate w/Adhesive Tape
Size: 1.76" long x 0.5" wide x 0.25" thickness
Great for office, school, conferences and crafts
Description
Neodymium magnets are the world's strongest magnets. Magnets Are Not Toys! Applied Magnets offers the highest quality Neodymium magnets with consistent performance and lowest price. Our Neodymium magnets are designed and manufactured to meet stringent quality standards using the latest technology. Neodymium magnets (also known as Neo, NdFeB, NIB or Super Magnets), a type of rare earth magnets, are the permanent magnets made from Neodymium, Iron, Boron and other minor elements. Strong Neodymium Magnets N42, stronger than N40, N38 and N35. BrMax: 13200 gauss. Nickel-Copper-Nickel triple layer coated for maximum Neodymium magnets durability and protection against corrosion.Disclaimer:
- Applied Magnets neither assumes nor accepts any liability for damages resulting from the handling or use. With your purchase, you confirm that you have read and understood the following warnings; the buyer agrees that he/she is responsible for all damages and injuries caused by the magnets, which include personal injuries, property damages and magnet damages. The buyer must agree with the terms before purchase. Pull force we provided is estimate only. We are not responsible for any inaccuracy of magnet pull force. (Please test the pull force before any usage.) Neodymium magnets are very, very strong.
- Neodymium magnets are brittle; they can be broken or can splinter in a collision. One should wear gloves and protective glasses when handling these magnets, because splinters and/or spacers could disengage and fly from the magnets. (This is true with all Magnets)
- The strong magnetic fields of Neodymium magnets can damage pace-makers or other bodily implants, keep a minimum of 3 feet distance.
- Children should not be allowed to handle Neodymium magnets as they can be dangerous. Small magnets pose a choking hazard and should never be swallowed or inserted into any part of the body!
6. DIY Name Badges, Wisdompro White Printable Blank PVC Badges (3-3/8" x 2-1/8") with Magnetic Name Tag For Jacket, Lapel,or Shirt - No Holes in your Fine Jackets or Shirts (10 Pack (Name Tag))
Feature
Blank PVC quality cards for most photo ID card printers like DataCard, Zebra, Evolis, Magicard etc.Blank Name Badge Size about 3-3/8" x 2-1/8"(54mmx85.7mm)
Magnet Tag Means No More Sharp Pins and Holes! No holes in your fine jackets or shirts - and no holes in YOU! JustSecure the Printed Name Badge to the 2-Way Foam Tape on the Stainless Steel plate
The Magnetic Plastic Plate goes Inside your Shirt or Jacket and Magnets Safely Hold the Badge in Place. Perfect for Hospitals, Schools, Factories to Print Work Permit.
Wisdompro Value Set includes 10 x Magnetic Name Tag; White Blank Name Badge; 1 x 4x4" Microfiber Cleaning Cloth
Description
The Wisdompro Blank PVC quality Badge Cards can be printed with most photo ID card printers like DataCard, Zebra, Evolis, Magicard etc. The Magnetic Name tag with strong magnets and adhesive foam tape is a simple and safe way to wear your identification. No pins means it is safe for you to wear without fear of stabbing your skin - and it doesn't put small holes in your clothing. This value-pack of 10 Magnetic Name Tag and White Blank Badges is a great deal for a very simple, but very improved way to wear identification. Each value-pack comes with a free Wisdompro microfiber cleaning cloth.Dimensions:
magnet tags about:1-4/5"*1/2"*1/4"(45.5mm*12.5mm*6.1mm)
white blank badges about:3-3/8" x 2-1/8"(85.7mm*54mm)
Wisdompro Retail Package includes:
Magnetic Name Tag
10 x White Blank Badges
1 x Wisdompro 4x4" Microfiber cleaning cloth
Wisdompro Customer Satisfaction Warranty:
If you encounter issues with any Wisdompro product, please do not hesitate to contact us, we will be happy to help you solve it.
Wisdompro products are sold by authorized sellers only.
7. RFID Front Pocket Leather Wallet for Men - Blocking Genuine Leather Credit Card Holder Mens Minimalist Wallets by Estalon (Tan Vachetta Magnet)
Feature
100% Genuine leather credit card is specially designed to carry currency note,Ids & credit cards,RFID BLOCKING TESTED & APPROVED BY INDEPENDENT LAB TESTS. Our wallets have been tested for 13.56 MHz Frequency in which our credit cards, debit cards, driver license and ID cards operate. PLEASE BE NOTED THAT the signal of some ID badge, access cards and hotel room cards which operates in 125 KHz, can not be blocked by this wallet.
FUNCTIONALITY: 1 Note Compartment, 4 credit card slots & 1 ID compartment. Measurement : 4.37 Inch X 3.18 Inch.
ENHANCES PERSONAL SECURITY: We leverage top RFID technology to block RFID signals used to electronically scan your wallet as someone passes by unnoticed. This keeps your vital information in driver license, debit cards and credit cards from being stolen.
1 YEAR WARRANTY, our warranty covers any defect caused during product production and delivery. We can offer you full refund or free replacement, whichever is at your most convenience.
Description
Hate having a giant bulging wallet in your back pocket? This is the ONE you are looking for. Minimalist designed, slim and small, Bulk Storage, up to 4-5 cards and several cash notes, and one ID, durable genuine leather, looks beautiful, feels great.It's a great front pocket wallet, a small compact card holder, enough for your daily use, walking around, light travel, nearby shopping.
With RFID blocking layer, Keep your personal information safety; protect your credit/bank/ID card information from being remotely read by RFID scanners. Don't become a victim of the silent crime of electronic pick pocketing
Features:
Genuine leather
4-5 cards
ID card
4.25 x 3 inches
RFID signal blocking
Covered by our 2 years warranty
What is RFID?
- RFID: Radio-frequency identification, uses electromagnetic fields to automatically identify and track tags attached to objects. The tags contain electronically stored information. Our Credit/Bank/ID card, passport have encoded chips tags, and stored our personal/private information. So, we should protect them from information hacker and data thieves.
- Data thieves can read your private data of cards at a distance of 10ft(3m), using a RFID scanner. Now, this RFID signal blocking wallet can protect your personal/private information safety.
- This item can block signal from 10MHz to 30GHz. Credit/Debit/ID card, driver license, passport use the frequency of 13.56MHz. It won't block signal from ID badge, some old hotel room cards or building access cards, which use a frequency of 125 kHz.
TIP:
- Due to the monitor and light difference, the color will be slightly different from the pictures.
- Logo prints maybe a little different with pictures.
8. Pack of 10 Adhesive Magnets for Name Badge / Magnetic Name Tag Holders with Three Neodymium Magnets
Feature
Package includes 10 front and back sets of super strong adhesive magnets / name tag fasteners. Using magnetic fasteners will protect your clothing from the damage caused by holes.Self adhesive foam/tape is adhered to the bottom plate/magnet. Easy peel & stick application to your desired surface
Magnets are strong enough to hold through thick shirts, jackets, etc.. Very high quality
These work perfectly for name tags, ID badges, general office use, conferences, school events, crafts, etc.
Dimensions: 1.75" wide, .5" tall, .25" thick
Description
These Adhesive Magnets are perfect for securing name badge/name tag holders without damaging clothing. With a simple two-piece, light-weight design, this product is guaranteed to be a good choice. Package includes 10 front and back sets of extra strong adhesive magnets/name tag fasteners.9. 10 Sets Super Strong 2 Piece Triple Magnet Fastener with easy peel Tab and Strong Adhesive Back for Name Tags and Identification Badges
Feature
10 sets Super Strong Triple Magnet 2 piece Name Badge Fastener 10pk BulkPremium Self Adhesive foam tape with tab attached to bottom plate / piece for easy peel an stick application
Measures 1 3/4inch x 1/2inch and approx. 1/4inch thick when together
These Magnetic Name Badge Fasteners are the Strongest We Have Ever Found
Do NOT use these if you have a pacemaker
Description
10 pack of 2 piece sets as pictured. (Magnet plus metal plate equals one set) Premium Self Adhesive foam tape with a tab on one side is attached to bottom plate / piece for easy peel an stick application. Measures 1 3/4" x 1/2" and approx. 1/4" thick when together. These are the strongest magnetic name badge fasteners that we have ever found after more than 30 years in the business. They arrive pre assembled as shown in the secondary picture, for easy handling. DO NOT use these if you have a pacemaker.10. ExcelMark 10 Name Badge Magnets - Magnetic Name Tag Holders with 3 Premium Strength Neodymium Magnets
Feature
10 Sets of Premium Quality ExcelMark Magnetic Badge Holder with Adhesive FastenerTwo piece design with front magnetic plate features adhesive backing to easily hold name tag, badge or ID
Each badge has 3 extra strong neodymium magnets
Dimensions: 1-3/4" long x 1/2" wide x 1/4" thickness
Perfect for office, school, crafts and much more.