Top 9 thermal adhesive for 2019
If you looking for thermal adhesive then you are right place. We are searching for the best thermal adhesive on the market and analyze these products to provide you the best choice.
If you looking for thermal adhesive then you are right place. We are searching for the best thermal adhesive on the market and analyze these products to provide you the best choice.
Best thermal adhesive
1. Halnziye 10Gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
Feature
10Gram TubeThermal Conductive Glue
Perfect For LED GPU Chipset Heatsink
Description
* 100% New Heatsink plaster.* Application: apply to all heatsinkf no fixed clip thermal paste. Idea for MOSFET HeatsinkVGA CARD Northbridge Southbridge Heatsink.
* Features: thermal properties, strong adhesion
* Melting capacity: 0 (200 / 24Hours)
* Evaporation: 0.001% (200 / 24Hours)
* Thermal conductivity:> 1.2W/m-K
* Thermal Impedance: <0.06
* Clotting time: 3min (25 )
* Strength of connected buildings: 25Kg
* Insulation coefficient> 5.1
* Dissipation coefficient <0.005
* Temperature resistance: 200
* Net Weight: 10g
Package Includes:
1 x Thermal Heatsink Plaster Glue.
2. Arctic Alumina Thermal Adhesive 5g
Feature
Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride.Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capaciti
A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams
Description
Arctic Alumina Ceramic Thermal Adhesive Epoxy w/ Application Wand - 5g NEW
3. Aikenuo 25M x 20mm x 0.25mm Thermal Adhesive Tape,High performance Thermal Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules, MOS tube,SSD Drives
Feature
Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.5kg/inch
180Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
4. Arctic Silver Arctic Alumina 5g Premium Ceramic Thermal Cooling Adhesive Set (AATA-5G)
Feature
Layered composite of aluminum oxide and boron nitridePure electrical insulator, neither electrically conductive nor capacitive
-40 to 150 Celsius temperature range
5g Set (2.5g x 2)
Description
The Arctic Silver Alumina Premium Ceramic Thermal Adhesive is a layered composite of aluminum oxide and boron nitride and is a pure electrical insulator.5. MG Chemicals 8329TCM Thermal Conductive Adhesive, Medium Cure, 14 g, 2 Dispeners
Feature
Excellent 1.36 W/(mK) thermal conductivityEasy 1:1 mix ratio
Adheres to most electronic substrates
Stores and ships at slightly below room temperature - no freezing or dry ice required. Very long shelf life of at least two years - even when stored at room temperature
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
Description
The 8329TCM Medium Cure Thermal Conductive Adhesive is an electronically insulating epoxy that combines moderate curing rate and high thermal conductivity. Used for thermal management situations requiring superior bonding strengths and good thermal transfers. For example, it is used to as a die-attach for electrical and electronics, increasing their long term reliability. It is great for heat sink bonding. It is also used as a high-powered LED adhesive that maximizes the lifetime of LEDs by dissipating their heat.. It has a convenient 1-to-1 ratio, a workable 45 minutes pot life, and a moderate curing rate. It may achieve a minimal service cure in seven hours at room temperature. The cured adhesive bonds very well to most substrates used in electronic assemblies; and resists thermal and mechanical shocks.6. Sywon Professional Thermal Adhesive Conductive Tape Double Sided Cooling Tape for IC Chipset Heatsink LED,10mm x 25m
Feature
Dimension: 10mm x 25m x 0.25mm (Width x Length x Thickness)Professional thermal adhesive tape for attaching heatsinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.
Satisfy thermal conducting needs of high-end electronic products; Improve the lifespan of electronic components
Make applying a heatsink compound as simple as possible
Material: fiberglass substrate, adhesive layer, backing paper; High thermal conductivity and electrical insulator
Description
Sywon Thermal Adhesive Conductive Tape can satisfy thermal conducting or cooling needs of high-end electronic products, and help improve the lifespan of electronic components. It's professional thermal adhesive tape for attaching heat sinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.Specifications:
Material: fiberglass substrate, adhesive layer and backing paper
Dimension: 10mm x 25m x 0.25mm (Width x Length x Thickness)
Net Weight: 95g
Short term heat resistance: 356 (180C)
Thermal Conductivity: 1.3w/m-K
Initial Adhesion: 1.3kg/inch
180 Stripping Power: >16 N/25mm
Breakdown Voltage: 4kv
Applicable temperature range: -20C ~ +120C
NOTE:
1.Peel off the blue backing before using it, thus the heat transfer tape is white and double-sided adhesive.
2.When using this thermal conductive double-sided tape, keep the adhesive surface clean and dry.
3.The adhesion of the heat-conductive adhesive tape has initial value and persistent value. At room temperature it takes 72 hours to achieve the maximum adhesive strength. That is, the initial viscosity is around 40% of its maximum viscosity, and persistent stickiness will become stable over time.
Package Includes:
1 x Thermal Conductive Double-Sided Adhesive Tape (10mm x 25m)
7. BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
Feature
Package included 1rollSize (W x L): 20mm x 25m; Material: glass fiber+ rubber; Strong adhesive
Used for attaching heatsinks to CPU GPU, high power LED, etc.
Double Side Adhesive Thermal Conductive Tape for hesatsink led
Noted: heatsink is not included
Description
Product Specification:
Glass fiber thickness: 0.1mm
Thermal Conductivity:1 W/m-k
Breakdown Voltage: 3KVAC
Thermal impedance : 0.3in2/w
Adhesive power:6.5 N/cm
Volume resistance: 3X1013ohm/cm
Applicable temperature range:-20~+120 C
8. 75g + 10g Thermal Conductive Silicone Plaster Viscous Adhesive Compound Cooling Glue For LED GPU Chipset Heatsink
Feature
50ml /PCS , approx. 75gDescription
100% New Heatsink plasterApplication: apply to all heatsinks no fixed clip thermal paste. Idea for MOSFET HeatsinksVGA CARD Northbridge Southbridge Heatsink.
Special properties: High Conductivity; low bleed; stable at high temperatures.
Features: thermal properties, strong adhesion
Thermal Resistance: <0.246 -in /W
Type: silicone fluid.
Physical From: Grease-like
Evaporation: 0.001% (200 / 24Hours)
Thermal conductivity:> 0.671W/m-K
Dielectric Breakdown: >6.0 KV ac
Maximum Use Temperature: -20~250.
Strength of connected buildings: 25Kg
Insulation coefficient> 5.1 * Dissipation coefficient <0.005
50ml /PCS , approx. 75g
9. Ceatech 30mm x 25m Thermal Adhesive Tape, Double Side Adhesive Thermal Conductive Tape Apply for Heat Sink, LED Strips, IC Chip, Computer CPU, GPU Modules, SSD Drives.
Feature
Ceatech thermal tape conductive with high thermal conductivity performance and insulation, strong adhesion, which can be tightly and firmly fit the heat source devices and heat sink. This strong adhesion and small thermal resistance features effectively replace the grease and mechanical fixation, Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced screw fixed, to achieve the most effective thermal dissipation.Wide Application - The double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickiness, while improving the work efficiency. It is widely used for high power LED, power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, computer CPU, GPU, Video Card RAM, DDR memory modules, SSD drives, new energy heating power devices.etc,
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use - Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
High Durability: Once applied, you do not need to apply it again as it will last at least for 5 years.
Description
Specification:Dimension: 30mm x 25m
Thickness: 0.2mm
Reinforcement Carrier : Fiberglass Mesh
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.3kg/inch
180Adhesion power: >16 N/25mm
Heat Resistance: 120C (long time), 180C ( short time)
Applicable temperature range:-30~+120 C
Application:
Electronics Components: ICCPU MOS .......
LEDM/BP/S Heat Sink LCD -TV Notebook PC PCTelecom DeviceWireless Hub
DDR Module DVD Applications Hand-set Application
Features:
Good adhesion (Acrylic PSA)
Very good thermal conductivity
Soft and compressibility
Easy to assemble
Long lifetime working : normal temperature(80-120 ) can work for a minimum of 5 years
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape