Top 9 recommendation petg yellow for 2019
When you looking for petg yellow, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable petg yellow is not an easy task. In this post, we show you how to find the right petg yellow along with our top-rated reviews. Please check out our suggestions to find the best petg yellow for you.
When you looking for petg yellow, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable petg yellow is not an easy task. In this post, we show you how to find the right petg yellow along with our top-rated reviews. Please check out our suggestions to find the best petg yellow for you.
Best petg yellow
1. AmazonBasics PETG 3D Printer Filament, 1.75mm, Yellow, 1 kg Spool
Feature
3D printer filament with 1.75 mm diameter + / - .05 mm; designed to fit most common 3D printers (check spool size for compatibility); Yellow; 1 kg spoolMade of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy type finish
Spool's built-in gauge shows percentage of material remaining and approximate length remaining
Engineered to reduce jamming; resealable storage bag included to protect filament between use
Measures 9.2 by 8.3 by 3 inches (LxWxH); weighs 2.2 pounds; backed by an AmazonBasics 1-year limited warranty
Description
An Amazon Brand.2. eSUN 3D 3mm PETG Yellow Filament 1kg (2.2lb), PETG 3D Printer Filament, Actual Diameter 2.85mm +/- 0.05mm, Semi-transparent Yellow
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant
3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.
eSUN 3D Printer Filament: PETG
Extrusion Temperature Range: 230_ to 250_
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
3. Inland 1.75mm Yellow PETG 3D Printer Filament - 1kg Spool (2.2 lbs)
Feature
1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)Recommended Extrusion/Nozzle Temperature: 230C - 250C (440F - 480F)/ No heated bed needed/ Vacuumed sealed with desiccant
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS
Widely Applications: PETG is used in a variety of application, such as water bottles, food packaging, medical and food containers, electronic devices, credit or gift cards, store fixtures, and prosthetic devices etc
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided
Description
WHY CHOOSE INLAND 3D PRINTER FILAMENT?Inland is a professional 3D printer filament manufacturer specialized in offering various colors and materials for 3d printing.
It is owned by Micro Center, a well-known reliable retail company in USA. We always offer high quality of electronics in a competitive price, and provide 100% satisfaction guarantee!
PRODUCT FEATURES
PETG Filament Features & Benefits
Excellent layer adhesion / Warp resistance / Low shrinkage / Higher density
Chemical resistance to both acidic and alkali compounds
Flexible printing on glass, acrylic, blue tape and polyimide tape
Odorless during printing
PETG filament is an extra tough & high strength 3D printing material, so can achieve very sturdy and strong prints. The low shrinkage feature make this perfect for larger flat surfaces.
PETG is a perfect alternative to ABS and PLA, offering higher strength, lower shrinkage, and a smoother finish.
When Should Use PETG 3D Printer Filament?
Use for objects which might experience sustained or sudden stress, like mechanical parts, printer parts, and protective components.
It's always used to make water bottles, food packaging, medical and food containers, electronic devices, credit or gift cards, store fixtures, and prosthetic devices.
When Not Use PETG?
PETG is not suitable for support structures because of its excellent adhesion.
Removing support structures made with PETG is very difficult, but not impossible.
SPECIFICATIONS
Type: Filament
Diameter: 1.75mm
Material: PETG
Color: Yellow
Print Temperature: 230C - 250C (440F - 480F)
Weight: 1kg (2.20 lbs)
WHAT'S IN THE BOX
1 kg PETG Filament
IMPORTANT NOTES
Actual color may vary from picture slightly due to computer settings.
4. 3D Solutech PETG175YLW 3D Printer Filament, Yellow, 1.75mm, 2.2 LBS (1.0KG)
Feature
1.75mm See Through Yellow PETG filamentFor common 3D printers such as MakerBot, RepRap, Afinia, UP, Mendel, flash forge, Sol doodle 2, Printout LC, Maker Gear M2 and etc
Backed by our 100% SATISFACTION GUARANTEE
Temperature range is 200C - 220C
Made in the USA
Description
Ultra smooth technology Our ultra smooth technology includes filaments capable of beautiful and smooth extraction to help build even the most delicate objects. Vacuum sealed We use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility Our filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback. 100% USA 100% of the materials used in our products are grown and made in the USA. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3d printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kinks or breaks. Check out our store for the latest colors and materials for your 3d printer. Package includes: 1 x 1.75mm See Through Yellow PETG Filament (2.2LBS) 1 x Filament clip.5. NOVAMAKER 3D Printer Filament - Yellow 1.75mm PETG Filament, PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm
Feature
1 KG (2.20 lbs) PETG Filament 100% New Virgin Material FROM Korea1.75mm Diameter Dimensional Accuracy +/- 0.03mm
Printing temperature: 230-260C Best temperature: 245C
Length Approx. 325m Vacuumed Sealed With Desiccant
Compatible with ALL FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen)
Description
NovaMaker Yellow PETG 3D Printer Filament 1.75mm Reference Specs:Diameter:1.75MM
Tolerance Level:0.03MM
Print Temperature:230-260C / (446-550F)
Print Speed:50-100mm/s
Base Plate Temperature:No Heat Required/50-80C
Bubble: 100% Zero Bubbles
Length: 325M/355Yard
Spool Diameter: 7.88" - Spool Width: 2.64" - Spool Hub Hole Diameter: 2.10"
Recommended Storage Temperature :-20 to 50C/ -4 to 122F
Why Choose NovaMaker?
+/-0.03MM TOLERANCE: NovaMaker PETG filaments are produced with more precise specification and have a tolerance of only +/-0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75mm-specification 3d printers in the market are configured to run with the PETG 3D printing filaments.
1.75MM PETG FILAMENT: The PETG filaments are used in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA and ABS, NovaMaker PETG filaments have adjusted the degradability of the material for optimal performance, so NovaMaker PETG filaments are not brittle during 3D printing jobs.
High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP!
100% SATISFACTION GUARANTEE: NovaMaker insists on offering best 3D printer filaments and best customer service for customers. The PETG 3D printer filaments are backed by NovaMaker 90-day Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now!
6. eSUN 1.75mm Yellow ABS 3D Printer filament 1kg Spool (2.2lbs), Yellow
Feature
1KG net (apximately 2.2 lbs) Filament with Clear SpooleSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 220C - 260C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: ABSExtrusion Temperature Range: 220_ to 260_
The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm._ ABS is a tough and durable thermoplastic which can withstand high temperature.
7. TIANSE Yellow PETG 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.03 mm
Feature
Material: PETG - Color: Yellow. Pack with Vacuumed SealedWeight: 1 KG (approximately 2.20 lbs) Spool
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
For common 3D printers such as MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2 and etc.
100% Satisfaction Guarantee: 2-Year Warranty and 24*7 customer support with technical advice
Description
High quality 1.75mm White PETG filament .Product Description
Material: PETG
Color: Yellow
Weight: 1KG (approximately 2.2 lbs)
Diameter: 1.75mm
Tolerance: +/- 0.02mm
Print temperature: 190C - 220C (374F - 428F )
Print speed: 50-100mm/s Platform temperature: No Need
Bubble: 100% no-bubble
About Tianse 3D Printing Supplies:
Choose Tianse and start your amazing 3D journey!
PLA has low shrinkage rate, even print larger models perform well.
Density is small, when printing larger volume model lighter, economical.
Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, and fewer extruder nozzle problems.
Eco-friendly, low shrinkage, high strength and good toughness.
To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.
After-sales service:
100% satisfaction is guaranteed by 2-YEAR WARRANTY for refund or replacement, and 24 x 7 professional customer support providing technical solutions.
Please feel free to contact us via email or Q&A, we will answer within 24 hours.
8. eSUN 3D 1.75mm Solid Yellow PETG 3D Printer Filament 1KG Spool (2.2lbs), 1.75mm Solid Opaque Yellow
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 240C - 255C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETGExtrusion Temperature Range: 240 to 255 Celsius
Plate temperature: 80~90 Celsius or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural).
Advantages of PETG: PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
There are a lot of eSUN PETG clients and experience sharing since it was released in 2014.
Ask ESUN/INTSERVO if you need help dial it in.
PETG requires slower printing speed than other materials.
9. Monoprice Premium 3D Printer Filament PETG - Yellow - 1kg Spool, 1.75mm Thick | FDA Food Grade | Ideal for Utensils & Dishware | For All PETG Compatible Printers
Feature
It's the perfect filament to combine strength and flexibility, which is why it's used in so many mechanical parts or robotics.The filament is super transparent with a glossy finish. It has great chemical resistance with good acidic and alkali resistance.
The superb chemical resistance is why the FDA has approved PET as acceptable for direct food contact.
The filament is environmentally friendly and recyclable. PETG is known for it's transparency and clarity so you're getting the benefits of both PLA and ABS in PETG.
The nominal print temperature is 230 ~ 250C (446 ~ 482F).
Description
New to Monoprice is the offering of PETG (Polyethylene Terephthalate Glycol) filament, which has more flexible strength than ABS filament. It's the perfect filament to combine strength and flexibility, which is why it's used in so many mechanical parts or robotics. The filament is super transparent with a glossy finish. It has great chemical resistance with good acidic and alkali resistance. The superb chemical resistance is why the FDA has approved PET as acceptable for direct food contact. The filament is environmental friendly and recyclable. PETG is known for it's transparency and clarity so youre getting the benefits of both PLA and ABS in PETG. The nominal print temperature is 230 ~ 250C (446 ~ 482F).