Top 8 recommendation rode nt-usb shock mount 2019
When you looking for rode nt-usb shock mount, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable rode nt-usb shock mount is not an easy task. In this post, we show you how to find the right rode nt-usb shock mount along with our top-rated reviews. Please check out our suggestions to find the best rode nt-usb shock mount for you.
When you looking for rode nt-usb shock mount, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable rode nt-usb shock mount is not an easy task. In this post, we show you how to find the right rode nt-usb shock mount along with our top-rated reviews. Please check out our suggestions to find the best rode nt-usb shock mount for you.
Best rode nt-usb shock mount
1. Rode PSM1 Shockmount For Podcaster Microphone
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Rotates 360 degrees with a maximum reach of 820mm (32.5 inches) horizontally and 840mm (33 inches) vertically
3/8 inch thread adaptor
Holds up to 2Kg (4.4lbs)
Does not need any nut/ washer or bolt. The open end of the shock mount is to be directly screwed onto the mic stand
Description
Shockmount for RODE Podcaster and Procaster Microphones2. Rode NTUSB Versatile Studio-Quality USB Microphone BUNDLE. Value Kit with Acc
Feature
Rode NTUSB Versatile Studio-Quality USB Microphone - Tripod Mount (Stand) - Pop Shield - USB Cable (6m/20") - Manual - Microphone Pouch - Mic Clip/Mounting Ring - Rode 1 Year Limited USA Warranty - Rode PSA-1 Professional Studio Boom ArmAdorama Valuable Bundle. Kit Includes.
Rode NTUSB Versatile Studio-Quality USB Microphone, Tripod Mount (Stand), Pop Shield, USB Cable (6m/20"), Manual, Microphone Pouch, Mic Clip/Mounting Ring, Rode 1 Year Limited USA Warranty.
PSA-1 Professional Boom Arm, Velcro Cable Wraps, Desk-Clamp and Desk-Insert Style Attachments (for verstile mounting in desks), 3/8" Adapter, Rode 10 Year Limited USA Warranty.
Description
The Rode NTUSB Versatile Studio-Quality USB Microphone is a cardioid, side-address USB microphone that is capable of capturing audio in up to 16-bit/48kHz resolution. It has an integrated headphone amplifier and 1/8" stereo headphone jack that allows for monitoring. The on-mic Direct Mix Control allows you to select between mic input and source input for monitoring. The NT-USB is compatible with the use of an optional camera kit.3. RODE SM6 Shock Mount with Integrated Pop Shield
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Weight: 682gm
Dimensions (HxWxD): 210 x 133 x 210 mm
Hinged vertical angle control
Description
Shockmount with Built-in Pop Filter for Rode K2, NT1-A, NT1-A Matched Pair, NT1000, NT2-A, NT2000, and NTK Mics4. Weymic Black Universal Microphone Shock Mount for Large Diameter Condenser Microphone,Metal Construction
Feature
Weymic Black Universal Microphone Shock Mount for Large Diameter Condenser Microphone,Metal ConstructionDescription
Description:This is a very nice shock mount for most large diaphragm condenser microphones.
Standard 5/8"-27 thread with a 3/8"-16 to 5/8"-27 screw adapter,so you can mount it on all the standard microphone stands.
Features an angle adjustment with locking knob.
Felt/foam insert to hold and protect microphone.
The shock mount only fits microphone diameter ranging from 48mm ~51mm
Fit for microphone:
ADK Vienna Edition,A6
AKG C 535 EB,C-24
Apex 415,435,460
Behringer B-2
Blue Bluebird,BABY BOTTLE,Stage one,Spark,woodpecker,dragonfly
CAD GXL 3000
ICON U1
M-audio nova
MXL OO6/006,OO7,OO8,V6,550,V67,V67Q,V67i,V69,DRK,2006,3000
Nady SCM 2090,SCM 800,SCM 900,SCM 910,SCM 920,TCM 1000,TCM 1150
Neumann TLM193,U89i,U87
Oktava MK219,ML53, MK319
Onstage OSM800
PEARL CR55
Rode Broadcaster Rode NT-2.
Studio Projects V77
Telefunken AK47,M16 MK II
Audio-technica AT2020+
Package include:
1 x Studio shock mount for diaphragm condenser microphones
silver color,same quanlity,found in this address: http://www.amazon.com/dp/B00R3UBS7E
5. Rode SM4 Microphone Shock Mount for NT models
Feature
Suspension shock mount4-way rubber suspension
The perfect accessory for NT3, NT4 and NT5.
Description
Helps eliminate unwanted noise during critical recording sessions. The SM4 suspension shock mount gives you the ability to isolate microphones from external physical factors that may cause unwanted rumble and vibrations in the microphone. The SM4 adds functionality to the RDE NTG-1, NTG-2, NTG-3, NT3, NT4 & NT5 microphones and attaches to any 3/8" or 5/8" threaded microphone stand.6. Microphone Shock Mount with 6 Inch Mic Round Shape Wind Pop Filter Mask Shield, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-53mm Microphone
Feature
Package include Microphone Shock Mount + Pop Filter, and come with one free universal connector adaper. Combination with these two making your broadcast or singing voice sounds more pleasant. Perfect with microphone suspension boom scissor arm standShock mount: Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling
Double screen pop filter: The gap between the two screen can block unwanted popping in recording, busting the pops of "S","P"s and "B"s.Effectively reduce the plosive, wind interference, saliva spraying
The pop filter has a metal gooseneck that can support its own weight. And the gooseneck is super-flexible and long enough to clamp to mic stand
Shock mount for microphone type: DIAMETER OF 46mm-53mm microphone. Outer frame diameter:95mm. Height:80mm. NOTE: Not for blue yeti. Please Verify your microphone size before ordering
Description
Microphone Shock Mount with Pop Filter-The shock mount can provide maximum isolation from handling vibrations and prevent unwanted movement of the microphone when you are recording.
-The shock mount allows you to adjust the angle of the microphone with a standard twist to tighten mechanism.
-The round shape double screen pop filter can reduce plosive, wind interference, saliva spraying,provides smooth and pefect sounds.
-Ideal for radio broadcasting studio, voice-over sound studio, recording.
Description:
-Shock mount material: Metal+Rubber
-Shock mount dimensions: Height: 80mm; Outer frame diameter: 95mm
-Shock Mount for microphone type: Diameter of 46mm-53mm microphone
-Pop filter diameter:6 inch
-Pop filter inner diameter: 13cm/5.1 inch
-Length of gooseneck:14.8 inch
Package Included:
1x Microphone Shock Mount
1x Pop Filter
1x universal connector adaper
The shock mount can fit 46mm-53mm microphone
Such as:AT2020, AT4033, AT4040, AT2050, AT2035, CAD U37, CAD GXL2400, RE20, TLM102, MXL440, MXL 4000, MXL V67G, MXL550, BM700, BM800, Rode NT1
7. Etubby 47-53mm AT2020 Microphone Shock Mount with Double Mesh Pop Filter & Screw Adapter, Adjustable Anti Vibration High Isolation Metal Mic Mount Holder Clip for Diameter of 47-53mm Microphone
Feature
Specially designed for microphone with a diameter of 47mm - 53mm, Please Check Your Microphone Size (Searching B072X5DM22 for No Pop Filter Version)Made of high grade metal and high elasticity rope, protecting the microphone all-around and preventing the microphone from falling
Added a foam pad to the microphone clamp to prevent the microphone from damage and scratches
Comes with a high density double metal mesh Pop Filter, preventing the dreaded hissing and lisping sounds to make your sound perfect
A metal 5/8" male to 3/8" female Mic Thread Screw Adapter included, used for connecting most of microphone stands
Description
Please Check Your Microphone Size Before Purchase, Shock Mount Only Fits For Mic With A Diameter of 47mm - 53mm (Searching B072X5DM22 for No Pop Filter Version)Features:
- Specially designed for microphone with a diameter of 47mm - 53mm
- Made of high grade metal and high elasticity rope, protecting the microphone all-around and preventing the microphone from falling
- Added a foam pad to the microphone clamp to prevent the microphone from damage and scratches
- Comes with a high density double metal mesh Pop Filter, preventing the dreaded hissing and lisping sounds to make your sound perfect
- A 5/8" male to 3/8" female Mic Thread Screw Adapter included, used for connecting most of microphone stands
Specifications:
Shock Mount Material: Durable Metal & High Elasticity Rope
Shock Mount Size: D9.2cm(outer frame) x D5.0cm (inner frame) x 8cm (height)
Shock Mount Compatible with Microphone with a diameter of 47mm - 53mm
Shock Mount Support Weight: 3kg (Max)
Pop Filter Material: Metal
Pop Filter Size: D8.0cm(outer) x D7.0cm(inner)
Screw Adapter Size: 5/8" male to 3/8" female
Fits for Microphones:
Audio-technica AT2020, AT2020+, AT4033, AT4040, AT2050, AT2035
MXL OO6/006,OO7,OO8,V6,550,V67, DRK,2006,3000
Nady SCM 2090 800 900 910 920,TCM 1000 1150
Blue Bluebird, BABY BOTTLE,Stage one,Spark, dragonfly
CAD GXL 3000, U37; Behringer B-2; AKG C 535 EB,C-24; Rode NT1, NT2; AK47,M16 MK II; BM700, BM800; RE20; Etc.
Other Mic Accessories:
Mic Scissor Arm Stand by Searching B07DHFDDS1
Mic Desktop Tripod Stand by Searching B00YAEIR0C
3/8" to 5/8" Screw Adapter by Searching B01EKS0H1O
Package Includes:
- 1x Etubby Mic Shock Mount (47-53mm)
- 1x Pop Filter
- 1x Thread Screw Adapter
Seller Warranty Policy:
30-Day Money-Back Guarantee
12-Month Replacement Warranty
Lifetime Customer Support
8. Weymic Wms-1 Silver Universal Microphone Shock Mount for Blue Spark Mic, Pr40, Atr2500-usb ,Metal Construction with Stand Arm Adapter
Feature
PLEASE NOTE: Only Fit Few Type of Microphone Such as Blue Spark,ATR 2500, Not For All Recording Microphone,Please confirm before order8-point flexible suspension support system isolates the microphone from mechanical vibrations.Compatible with 3/8"-16 and 5/8"-27 threaded stands,Metal construction
Compatible with as following: Blue Spark,ATR 2500 .AT4040.MXL 440.MXL 990
Microphone only for display purposes, product packaging does not contain this microphone
RECOMMENDED: Suspension Boom Scissor Arm Stand: www.amazon.com/dp/B00IGNUQ98
Description
Description:This is a very nice shock mount for most large diaphragm condenser microphones.
Standard 5/8"-27 thread with a 3/8"-16 to 5/8"-27 screw adapter,so you can mount it on all the standard microphone stands.
Features an angle adjustment with locking knob.
Felt/foam insert to hold and protect microphone.
This shock mount is Compatible with as following: Blue Spark,ATR 2500 .AT4040.MXL 440.MXL 990
Package include:
1 x Studio shock mount for diaphragm condenser microphones