Top 5 recommendation racerstar starf4s
When you looking for racerstar starf4s, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable racerstar starf4s is not an easy task. In this post, we show you how to find the right racerstar starf4s along with our top-rated reviews. Please check out our suggestions to find the best racerstar starf4s for you.
When you looking for racerstar starf4s, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable racerstar starf4s is not an easy task. In this post, we show you how to find the right racerstar starf4s along with our top-rated reviews. Please check out our suggestions to find the best racerstar starf4s for you.
Best racerstar starf4s
1. RacerStar 35A 4in1 ESC 3-6S Special Edition with Current Sensor DShot600
Feature
Powerful 35A ESC with up to 22V rating!High quality components with through-plated power wiring pads.
DShot600 ready.
Built-in current sensor, no BEC on-board.
Description
Model: REV35Con. Current: 35A
Peak Current(10s): 40A
LBEC: NO
SBEC:NO
Lipo: 3-6S
Programming: YES
Weight:13g
Size(PCB): 36x36mm
Hole size: 30.5x30.5mm
Features:
-BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmware
-Supports 3-6S Lipo input
-4PWM input
-Built-in Current sensor
-Only 36x36mm, mount holes 30.5x30.5mm M3
-No External capacitors needed
-Dshot600 ready(Default) Support PWM/ONESHOT/MULTISHOT/DSHOT
Package Included:
1x Racerstar REV35 35A 4 in 1 ESC
2. Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
Feature
Lipo Battery: 2-4S | Con. Current: 30A | Peak Current: 35A (10S) | LBEC: 5V @3A | Programming: YESF4 FC + OSD + BEC + Current Sensor
Input Voltage: 2-4S Lipo | Output Voltage: 5V@1A | Sensor: STM32F4 CPU | Size(PCB): 36x36mm | Weight: 22g
ICM-MPU6000 Accelerometers and Gyroscopes SPI MicroUSB socket
Package Included: 1x Racerstar 30A 4 in 1 ESC Buit-in F4 OSD FC / 2x Cable / 1x bag of screws / 1x Manual
Description
Note: The 4 installing holes were linked to the possitive of power. ( battery +) Therefore, must use the plastic screws or any others non-conductive screws to install. If not, the FC/ESC/Receivers will be brunt.Features:
- Built-in F4 Flight Control Board integrated with OSD
- BB2, 48MHZ Chip
- Blheli_S Firmware,
- 4 in 1 ESC, Super small size (36*36mm) and light weight, easy to install and use
- With 5V 3A LBEC
- With Current Sensor
-Support 2-4S Lipo Battery
- Support Oneshot42, Oneshot125, Multishot and 16.5 Dshot600
- All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
3. Toolcool Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
Feature
Built-in F4 Flight Control Board integrated with OSDBB2, 48MHZ Chip
Blheli_S Firmware,
4 in 1 ESC, Super small size (36*36mm) and light weight, easy to install and use
With 5V 3A LBEC;With Current Sensor;Support 2-4S Lipo Battery;Support Oneshot42, Oneshot125, Multishot and 16.5 Dshot600;All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
Description
Model: StarF4SLipo Battery: 2-4S
Con. Current: 30A
Peak Current: 35A (10S)
LBEC: 5V @3A
Programming: YES
F4 FC + OSD + BEC + Current Sensor
Input Voltage: 2-4S Lipo
Output Voltage: 5V@1A
Sensor: STM32F4 CPU
ICM-MPU6000 Accelerometers and Gyroscopes SPI MicroUSB socket
Size(PCB): 36x36mm
Weight: 22g
Package Included:
1x Racerstar 30A 4 in 1 ESC Buit-in F4 OSD FC
2x Cable
1x bag of screws
1x Manual
4. USAQ Betaflight F3 Micro 6A 2S 4-in-1 Brushless ESC OSD Flight Controller Micro Cube
Feature
Built in PDB, OSD, and 4-in-1 ESC.Total weight of only 6.5g!
Ideal for 65-120mm frames.
Complete F3 flight controller-Betaflight ready!
Description
Flight Controller Specifications:Dimensions: 20*20mm
Mounting Dimensions: 16*16mm
Weight: 1.9g
Processor: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 ( connected by SPI)
Firmware version: betaflight_3.1.0_OMNIBUS
Built-in BEC: 5V/0.5A
Receiver: PPM, Spektrum 1024/2048, SBUS, IBUS, XBUS, SumD SumH RX etc.
Power supply: 2S lipo battery ( 6.5V-8.4V)
Suitable for 60mm-80mm mini brushless FPV Quadcopter frame
ESC Specifications:
Item name: 4 In 1 6A BLHeli_S ESC
Size: 25x29mm (includes solder pad)
Mounting holes: 16x16mm, 2mm
Weight: 3g
Input voltage: 2S lipo
Con. Current: 6A
Peak Current: 10A (5S)
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
BEC: NO
Driver: 3 in 1 MOS
Supports Dshot Oneshot multishot
Features:
-Support programmable LED Sprit (turn off transponder before using)
-Support BLheli/BLHELI_S suite Pass-through ready
-Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
-Default Dshot600
-Built-in voltage detection, alarm
-Built-in Betaflight-OSD
-Buzzer solder pin
-LED_STRIP connector
Package included:
1* Super_S F3 flight control board
1* Super_S BS06D 6A 4in1 ESC
8*M2*5+5 Nylon column
8*M2 Nuts
8*M2 Screw Requires Betaflight to Configure
Drivers required are available from Betaflight Welcome Screen.
5. USAQ Micro 6A 4-in-1 Brushless ESC 1-2s for Micro Quadcopter Racing Drone 25x29mm 3g
Feature
Ultra micro 16x16mm mounting.Ultra light at only 3g.
DShot 600 MultiShot ready.
Description
Size: 25x29mm (includes solder pad)Mounting holes: 16x16mm, 2mm
Weight: 3g
Input voltage: 2S lipo
Con. Current: 6A
Peak Current: 10A (5S)
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
BEC: NO
Driver: 3 in 1 MOS
Supports Dshot Oneshot multishot
Package include:
1 x RS 4 In 1 6A BLHeli_S ESC
1 x Cable
4 x M2*5+5 nylon column
4 x M2 Screw
4 x M2 Nut