Top 10 recommendation punch set with holder
Finding the best punch set with holder suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best punch set with holder suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best punch set with holder
1. MulWark 9 Pieces Assorted Bolt Catch Roll Pin Punch Set Firearms Assembly Gunsmithing Kit-Corrosion Resistant Hand Pin Remover Tool with Holder for Automotive, Gunsmith, Watch Repair,Jewelry and Craft
Feature
Use drop forged and heat treated steel to offer extreme durability, and the long, parallel ground shanks with knurled handle can achieve better gripThe high quality chrome-vanadium steel with around hardness of 50 HRC can eliminate bending, flexing or broken when punched on; and the upgraded version tapered punch applied with classic natural finish with a dry-touch, rust-preventative coating have strong resistance to corrosion, abrasion or glaring damage
Small, lightweight hand tools used to install / drive hollow pins, tension pins or split roll pins, e.g. Ar15/ ar-15 bolt catch grip pin, vise block pin and pins in other ar15 parts, bolt carrier group pin, gas block roll pin, trigger guard/ charging handle roll pin, foosball men roll pin, charging handle pins or any other machinery linkage pins, etc. Specifically designed for jewelers, gunsmith, watchmakers, repairs and crafts
The fashionable orange punches pouch makes it more standing out in your tool room and decrease the tediousness of repair/building work; the nylon storage case also offers a great organizing solution for the punches
LIFETIME WARRANTY: all MulWark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement
Description
MulWark 9 in 1 roll pin punch set are the safest and easiest tool to remove and re-use roll or spring pins without causing glaring damage to the pins. With these pins becoming so common, having the right punches to remove them is absolutely necessary. This roll pin punch set features:
Long-term Durability
Each punch is made of chrome-vanadium steel (hardness up to 48-56 HRC), which prevents rounding of the punch and prolongs the punch life
Its black oxide steel finish gives strong resistance to corrosion, abrasion or glaring damage
Best Punch Performance
These have little bump on the end, making it line up on the roll pin for a nice easy removal or installment of the roll pin, and the rounded, plastic tip makes sure it won't cause scratches or deform the pins
The punch tips have a reverse-taper design making them slightly wider than the rest of the shaft so they won't stick in pin holes
Key Value:
MulWark applies selected materials and special finishing & craftsmanship to these punches, in order to achieve the most proper hardness, avoiding easily bending or the opposite, easily breaking.
What Is Inside the Package:
1-pc. 1/16" X 2 3/4"
1-pc. 5/64" X 3 1/4"
1-pc. 3/32" X 3 1/2"
1-pc. 1/8" X 4"
1-pc. 5/32" X 4 1/2"
1-pc. 3/16" X 4 3/4"
1-pc. 7/32" X 5"
1-pc. 1/4" X 5 1/2"
1-pc. 5/16" X 6 1/4"
1-pc. Roll-up storage pouch
Who It Is Design for:
Mr. DIY
Professionals or amateurs as armorers, jewelers, gunsmith, watchmakers, carpenters, and mechanics, etc.
This set is ideal for multi-purpose as repairing or servicing guns, small equipment, machines, and vehicles, e.g. door pin removal, Ar15 spring repair, cotter pin extractor
2. RAM-PRO Roll Pin Punch Set with Storage Pouch, 9 Piece Steel Removal Tool Kit | Perfect for Jewelry, Watches, Gun Rifle (AR-15) Spring/Tension Pins
Feature
The Ram-Pro Heavy Duty Spring Pin Punch Set is a Must have Kit that is extremely useful whenever you're trying to remove any size of Pin fastener and accurately pounding it without harming the surroundings or causing any damage.SPECS: 9 Tension Pin Punches included: 1/16" x 2-3/4" - 5/64 x 3/14 - 3/32 x 3-1/2 - 1/8 x 4 - 5/32 x 4-1/2 - 3/16 x 4-3/4 - 7/32 x 5 - x 5-1/2 - 5/16 x 6-1/4 inch. - Carrying Holder Pouch included for easy organization & transport. - Sizes are carved onto each Punch for easy identification.
DESIGN: Ram-Pro Roll Pin Punches have Precise Punch Balls on the ends to recess on the Pin and prevent getting slid off - Specially designed to safely drive Roll Pins without damaging or marring the product - Ergonomically Knurled Hand Grips helps Decrease fatigue and Increase Punching success.
QUALITY: Made of Heavy Duty Drop-Forged & Heat Treated Steel Construction | Heavy Duty Non-Rust Sturdy Punches will last through the most extreme pressures & repairs and fix jobs consistently - Precise manufacturing transformed into thin exact Punches to successfully remove the Pins from their tubes.
USE FOR: Handy Easy-to-use Punches for Fast and Safe Removal of Slotted or Coiled Roll, Spring and Tension Pins - Perfect for Gunsmith Maintenance/Repair, Jewelry, Watch Makers, Arts & Crafts, Automotive Hitches, Garage Doors and Door Hinges.
Description
About Ram-Pro Spring Roll Pin Punch Kit The Problem: Trying to remove Roll Pins with a hammer and some odd object is always a challenge and never performs as expected and always tend to slide off target and damage the whole application. Our Solution: A 9 Piece Pin Removal Tool Kit! INCLUDED: #1 - 1/16" x 2-3/4"#2 - 5/64" x 3/14"
#3 - 3/32" x 3-1/2"
#4 - 1/8" x 4"
#5 - 5/32" x 4-1/2"
#6 - 3/16" x 4-3/4"
#7 - 7/32" x 5"
#8 - " x 5-1/2"
#9 - 5/16" x 6-1/4"
1 Storage Pouch
(Sizes are engraved onto each Punch and easy to read). Whether you're maintaining your firearm or wanting to remove/change any size of secure Pin, this set will help you out From Door Hinge Pins to Automotive Hitch Pins. Kit includes the useful popular Pin size: 3/32 inches, (Perfect or gun dismantle and removing the bolt catch release pin). Instructions: Make sure the punch is absolutely straight and in line with the pin you are removing.
Work piece 'Must' be properly supported with a proper bench block that prevents the piece from shifting as well as having a hole to allow the pin to exit through. Punches can withstand the utmost impacts without breaking.
Due to the brilliant Ball Pin Head design, the punches won't even move or slide off the desired hitting point. Storage & Organization:
Roll-Up Storage Pouch is included in the package for better storage and transport efficiency. A Gunsmith's Must Have Tool - Works on all types of Guns Pistols and Rifles, From AR15's to AK's and M's. No more struggling and breaking Nails, Wrenches or Bits when trying to pound out Spring Pins. If you're building an AR15 or just doing repairs on one, you NEED these extractors. A Must have for any Home Mechanic!
3. HORUSDY Heavy-Duty 12-Piece Hollow Punch Set with Holder for Punch Precise Holes in Leather or Plastic
Feature
Punch Precise Holes in Leather or Plastic.12 Piece Hollow Punch Set: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/32", 5/8", 3/4"
Constructed of Heat-hardened High Carbon Steel for Sharpness and Durability
Machined Diamond-patterned Grip for Secure, No Slip Hold under Hammer
Comes with Durable Canvas Zip Pouch for Easy Storage & Transportation
Description
Details:
Suitable for all kinds of leather works and belts, vinyl & gasket material
Made from hardened steel.
Set includes sizes:
1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/32", 5/8", 3/4"
Carbon steel and heat treated knurled bodies for a secure grip.
4. 9 Pieces Roll Pin Punch Set, Gunsmithing Kit Removing Repair Tool with Holder for Automotive, Watch Repair,Jewelry and Craft
Feature
The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
9pcs different size including 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
Description
9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability.
Perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package
Pack Includes:
1-pc. 1/16" X 2 3/4" Punch
1-pc. 5/64" X 3 1/4" Punch
1-pc. 3/32" X 3 1/2" Punch
1-pc. 1/8" X 4" Punch
1-pc. 5/32" X 4 1/2" Punch
1-pc. 3/16" X 4 3/4" Punch
1-pc. 7/32" X 5" Punch
1-pc. 1/4" X 5 1/2" Punch
1-pc. 5/16" X 6 1/4" Punch
1-pc. Roll-up pin holder case
1 xCanvas Pouch
5. Grace USA - Roll Spring (Pin) Holder Set - RSH-5 - Gunsmithing - Roll Pin Holders - 5piece - Gunsmith Tools & Accessories, Black (GRRSH5)
Feature
The 1/16" Roll Spring (Pin) Holder is notched to clear most rifle platforms rear sightsThe 3.5mm is excellent for holding the pin that retains the breech block on Sig handguns
The sizes are 1/16" (notched, 5/64", 3/32", 1/8", 3.5mm; Made from 5/16" Hex High Carbon 5160 Steel & Bainite heat treated for strength
Single groove in grip section and laser marked for quick identification
Made in the USA
Description
Grace USA Roll Spring (Pin) Holder accurately drilled to hold tiny roll springs (pins) so perfect alignment is achieved. Made in the USA with the quality you have come to expect from Grace USA tools.6. Twod Roll Pin Punch Set with Storage Pouch, 9 Piece Steel Removal Tool Kit for Jewelry, Watches,Rifle Pins with Holder
Feature
Hardened steel construction: This roll pin punch set is made of highly quality hardened steel, drop forged, heat treated & knurled steel for extreme durability, workabilityGreat Handle:The knurled handles are deeply cut and let you get a good handle on it while striking with a hammer
Safe hemispherical recessed roll pins:Hemispherical recessed tips to cradle the roll pin, so it won't cause scratches or damage to your firearm
Full set roll pin punch:9pcs different size including 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"punch size, this roll pin punch set kit is perfect tool for gunsmith, jewelers, watchmakers, engineers, carpenters - use on Machinery, Vehicles, Woodwork and Crafts.
Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with red carrying case, easy to use, carry, storage or hang this tool set.It comes with a Hammer
Description
Description:
Twod Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
As a bonus, this set comes with an awesome pin holder case.
These have an elevated pilot point tip which makes it line up on the roll pin for a nice easy removal of the roll pin.
This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
The punch tips have a reverse-taper design making them slightly wider than the rest of the shaft so they won't stick in pin holes.
Parameters: Material:Stainless Steel Dimensions:8.07*2*1.2inch Weight:355g(12.5oz) Color:Red Package included: 1-pc. 1/16" 1-pc. 5/64" 1-pc. 3/32" 1-pc. 1/8" 1-pc. 5/32" 1-pc. 3/16"1-pc.
7/32" 1-pc. 1/4" 1-pc. 5/16" 1- pc. Roll-up storage pouch7. 9 Pieces Roll Pin Punch Set, Gunsmithing Kit Removing Repair Tool with Holder for Automotive, Watch Repair,Jewelry and Craft
Feature
The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
9pcs different size including 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
Description
9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability. Perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package8. 9PCS Roll Pin Punch Set - Hand Pin Remover Hollow Tool Punch Set Holder for Automotive, Gunsmith, Watch Repair, Jewelry and Craft
Feature
Full set roll pin punch let you ponch out most size of pinsSmall, lightweight hand tools used to install / drive hollow pins
Fast and safe: it helps to introduce or insert solid pins, hollow pins and springs.
Used to remove pins, simply take heat treatment punch and hit hammer hammer to remove needles from machines, jewelry or anything else you are working on.
Clip roller punch (9pcs): this high quality quenching steel 9 punch press is designed to remove the roller pin from the gun conveniently.
Description
9pcs Multi Size Round Head Pins Set Punch 40CR Steel Grip Roll Pins Punch Tool
Features:
Great punches of all kinds of jobs and it is equipped with a convenient carry bag.
Fast and safe: it helps to introduce or insert solid pins, hollow pins and springs.
Used to remove pins, simply take heat treatment punch and hit hammer hammer to remove needles from machines, jewelry or anything else you are working on.
Clip roller punch (9pcs): this high quality quenching steel 9 punch press is designed to remove the roller pin from the gun conveniently.
The club head helps the punch on the locating pin and protects the pin ends from damage during disassembly or installation.
Specifications:
Material: 40 Cr steel
Punch size: 1/16 inch, 5/64 inch, 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch (9pcs).
Weight: 361g
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
9. SE ST3018 18-Piece Drive Pin Punch Set
Feature
(8) Solid brass punches(8) Heat-treated steel punches
(1) Spring-loaded automatic brass center punch
(1) Vinyl carrying pouch
Length of all punch tips: 1"
Description
This drive pin punch set is great for gunsmithing, machinery, automotive work, crafts, and hobbies. Use the brass and steel punches for driving out pins in guns, machinery, and auto parts, and use the automatic center punch to create dimples or impressions on soft metals and wood. For your convenience, these tools come with a plastic pouch to help keep your set organized and complete.
Features of this product include:
*(8) Solid brass punches
- Overall length: 3-
- Punch tip length: 1
- Punch sizes: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4", 5/16
* (8) Heat-treated steel punches
- Overall length: 4
- Punch tip length: 1
- Punch sizes: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4", 5/16
* (1) Spring-loaded automatic center punch
- Overall length: 5-
- Solid brass body
- Hardened steel tip
* (1) Vinyl carrying pouch
Important:
Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging.
SE is committed to providing the customer with the best possible source for value. You will enjoy the quality, function and usefulness our 18-Piece Drive Pin Punch Set has to offer.
SE is a registered trademark protected by US Trademark Law.
10. Grace USA - Bench Block Holder for PS-7 Steel Punch Set - Gunsmithing - Steel Punch Set Holders - PS7 - Gunsmith Tools & Accessories
Feature
Each Bench Blockis made out of 60 durometer Neoprene rubberNeoprene rubber is a general purpose compound that offers excellent oil resistance and chemical stability, as well as vibration dampening
Neoprene will remain stable over a wide temperature range
Handcrafted in the USA