Top 10 recommendation bumper armor 2019
When you looking for bumper armor, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable bumper armor is not an easy task. In this post, we show you how to find the right bumper armor along with our top-rated reviews. Please check out our suggestions to find the best bumper armor for you.
When you looking for bumper armor, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable bumper armor is not an easy task. In this post, we show you how to find the right bumper armor along with our top-rated reviews. Please check out our suggestions to find the best bumper armor for you.
Best bumper armor
1. PARKING ARMOR 4.8 - (48" Wide x 12" Tall) Indoor/ Outdoor Ultimate Rear Bumper Protector, Steel Reinforced Straps, Widest Bumper Protection, Thickest Bumper Guard, STEEL REINFORCED STRAPS PREVENT THEFT !
Feature
48" x 12" Bumper Protection Area *** WEATHER RESISTANT RUBBER MATERIAL ***Waterproof Steel Reinforced Straps - SRS Straps (Helps Deter Theft)
2" EXTRA Thick Hi-Density Foam Core - ULTRA BRITE Silver Safety Strip
Soft Anti-Skid Foam Pads Behind Trunk Straps (Soft On Paint Finish)
"Flex-Body" Structure - Allows Parking Armor To Flex Around the Contours of Your Bumper
Description
PLEASE NOTE THAT PARKING ARMOR IS AVAILABLE IN 3 SIZES (36", 42" and 48"). PLEASE SEE OUR OTHER PARKING ARMOR LISTINGS FOR OTHER SIZESThe ParkingArmor 4.8 is hands down the biggest, best and most effective rear car bumper protector on the market. The 2" thick foam core is lightweight and perfect for cushioning parking bumps. Weather resistant rubber-like material is suitable for outdoor street parking as well as parking garages.
*** PLEASE READ BEFORE PURCHASING *** 1. Please make sure both your trunk and bumper can accommodate the product size (36", 42" or 48") you are looking to buy.
2. The ParkingArmor products are both tall and wide, therefore they are NOT recommended on bumpers that are very narrow (Ex: Toyota Rav4, Honda CRV) or rear engine vehicles (Ex: Porsche 911).
NOTICE: A properly fitted ParkingArmor should NEVER block, cover or come in contact with your vehicle's exhaust pipe(s). Product contact with a hot exhaust pipe may damage both the product and your vehicle. ParkingArmor is designed for use on parked vehicles only! Never drive or operate a vehicle with the ParkingArmor hanging outside of the vehicle.
2. Bumper Thumper Ultimate Complete Coverage Front Bumper Guard Shock Absorbing Flexible License Plate Frame PROTECTION SYSTEM (License Plate Frame ONLY)
Feature
MAXIMUM PROTECTION over 2" THICK, over 15" WIDE, & over 7" TALLEXTRA WIDE VIEWING ANGLE = NO CITATIONS FOR OBSCURING PLATE
INNOVATIVE PATENT PENDING FLEXIBLE FRAME DESIGN PROTECTS YOUR VEHICLE AND YOUR LICENSE PLATE BETTER THAN EVER BEFORE POSSIBLE
DENSE ALL-WEATHER IMPACT ABSORBING FOAM WILL NEVER RUST OR
STAINLESS STEEL REINFORCED RIGIDITY
Description
Bumper Thumper is the Ultimate Front Bumper Guard License Plate Frame due to its Patent Pending innovative design and unique utility which dramatically improves upon the functionality of pre-existing flexible license plate bumper guards.And NOW Bumper Thumper is the very first adjustable in length COMPLETE COVERAGE FRONT bumper guard offering protection for the corners and sides with removably attachable and anti-theft locking side piece extension straps (sold separately - and can be added at anytime in the future).
If you park on the street and are susceptible DAILY to other driver's parallel parking "accidents" - WHY WOULDN'T YOU ARMOR YOUR VEHICLE'S FRONT BUMPER with the ULTIMATE in PROTECTION?
AND SINCE the sides and corners of your bumper are also constantly AT RISK, why not consider protecting them AS WELL by choosing a license plate frame that offers a COMPLETE COVERAGE option for added PROTECTION?
- The ALL FOAM RUBBER - Bumper Thumper License Plate Frame - elevates/suspends your license plate 1.25" off of your bumper - ensuring your license plate will not cause damage to YOUR VEHICLE.
Other "similar" in appearance guards mount over your license plate and therefore are really only protecting other people's cars - NOT YOURS.
Unique Features Include:
- NO OBSTRUCTION of License Plate View = NO POLICE CITATIONS for obscurring your license plate number
- STAINLESS STEEL REINFORCED RIGIDITY
- RECESSED SCREW HEADS WON'T HARM OTHER VEHICLES
- UNIVERSAL FIT - MOUNTING SCREW LOCATION FLEXIBILITY (6"-8" SPREAD)
- 4 SCREW STABILITY - EVEN IF YOU ONLY HAVE 2 SCREW HOLES IN YOUR BUMPER
- CAN BE MOUNTED DIRECTLY ON YOUR BUMPER OR OVER YOUR VEHICLE'S FACTORY LICENSE PLATE MOUNTING BRACKET
- INCLUDES STAINLESS STEEL INSTALLATION SCREWS
- DISCREET OEM LOOK - NO LOGOS OR INSIGNIAS
3. PARKING ARMOR 3.6 - (36" Wide x 12" Tall) Indoor/ Outdoor Ultimate Rear Bumper Protector, Steel Reinforced Straps, Widest Bumper Protection, Thickest Bumper Guard, STEEL REINFORCED STRAPS PREVENT THEFT !
Feature
36" x 12" Bumper Protection Area *** WEATHER RESISTANT RUBBER MATERIAL ***Waterproof Steel Reinforced Straps - SRS Straps (Helps Deter Theft)
2" EXTRA Thick Hi-Density Foam Core - ULTRA BRITE Silver Safety Strip
Soft Anti-Skid Foam Pads Behind Trunk Straps (Soft On Paint Finish)
"Flex-Body" Structure - Allows Parking Armor To Flex Around the Contours of Your Bumper
Description
PLEASE NOTE THAT PARKING ARMOR IS AVAILABLE IN 3 SIZES (36", 42" and 48"). PLEASE SEE OUR OTHER PARKING ARMOR LISTINGS FOR THESE SIZESThe ParkingArmor 3.6 is hands down the best and most effective rear car bumper protector on the market. The 2" thick foam core is lightweight and perfect for cushioning parking bumps. Weather resistant rubber-like material is suitable for outdoor street parking as well as parking garages.
*** PLEASE READ BEFORE PURCHASING *** 1. Please make sure both your trunk and bumper can accommodate the product size (36", 42" or 48") you are looking to buy.
2. The ParkingArmor products are both tall and wide, therefore they are NOT recommended on bumpers that are very narrow (Ex: Toyota Rav4, Honda CRV) or rear engine vehicles (Ex: Porsche 911).
NOTICE: A properly fitted ParkingArmor should NEVER block, cover or come in contact with your vehicle's exhaust pipe(s). Product contact with a hot exhaust pipe may damage both the product and your vehicle. ParkingArmor is designed for use on parked vehicles only! Never drive or operate a vehicle with the ParkingArmor hanging outside of the vehicle.
4. BumperArmor (Standard Edition) - Heavy Duty Front Bumper Guard. Biggest & Toughest Flexible Rubber Front Bumper Protector !
Feature
ALL RUBBER CONSTRUCTION! Will not crack like plastic or rust like a metal license plate frame!UNIVERSAL FIT! Can mount directly to your vehicles front bumper or on top of your factory mounting bracket. Measuring 13.25" wide x 7.5" tall and 1" Thick
TWO-IN-ONE DESIGN! BumperArmor STANDARD EDITION acts as both a license plate frame and a front bumper guard.
MOAT DESIGN - HELPS ABSORB IMPACTS - Unique moat design on the backside for added shock absorption.
MILITARY GRADE FINISH - Black matte finish will blend in with any car and look like an OEM part.
Description
The BumperArmor STANDARD EDITION is a flexible rubber license plate frame and bumper guard in one. The unique frame design adds a clean style that will compliment any vehicle make and model. BumperArmor was designed for the "front bumper" and may not work on the rear bumper because of clearance issues on some vehicles (please see BumperArmor dimensions).BumperArmor Features:
(1) Soft flexible rubber material can be twisted and bent always returning to its original shape. Will never crack or rust like metal frames.
(2) Made from a durable all weather rubber that is perfect for any weather.
(3) Black matte finish will blend in with any car and look like an OEM part.
(4) Unique moat design on the backside for added shock absorption.
(5) Will fit most vehicles and factory brackets (Note: will not fit Volvo vehicles since the bolts on the Volvo mounting bracket are too short).
(6) Includes 1" zinc plated mounting screws and bolts.
(7) Taller and wider than a standard license plate frame for added parking protection
(8) Screws are recessed back from the frame, so it protects other vehicles.
(9) Available in two sizes (standard edition and monster edition).
WILL IT FIT MY VEHICLE?
Before purchasing please measure the distance between your license plate mounting holes. The BumperArmor mounting holes are spaced 7" apart from left to right, this is the standard hole spacing in most states. BumperArmor was designed to fit the front bumper for most vehicles, except Volvo (since the license plate bolts are welded to the factory bracket and are to short). We recommend using BumperArmor with the factory bracket. You can mount BumperArmor with either the top 2 or all 4 screws.
DIMENSIONS:
Standard: 13.25" wide x 7.5" tall and 1" Thick
Weight: 1.5 lbs
5. PARKING ARMOR 4.2 - (42" Wide x 12" Tall) Indoor/ Outdoor Ultimate Rear Bumper Protector, Steel Reinforced Straps, Widest Bumper Protection, Thickest Bumper Guard, STEEL REINFORCED STRAPS PREVENT THEFT !
Feature
42" x 12" Bumper Protection Area *** WEATHER RESISTANT RUBBER MATERIAL ***Waterproof Steel Reinforced Straps - SRS Straps (Helps Deter Theft)
2" EXTRA Thick Hi-Density Foam Core - ULTRA BRITE Silver Safety Strip
Soft Anti-Skid Foam Pads Behind Trunk Straps (Soft On Paint Finish)
"Flex-Body" Structure - Allows Parking Armor To Flex Around the Contours of Your Bumper
Description
PLEASE NOTE THAT PARKING ARMOR IS AVAILABLE IN 3 SIZES (36", 42" and 48"). PLEASE SEE OUR OTHER PARKING ARMOR LISTINGS FOR THESE SIZESThe ParkingArmor 4.2 is hands down the best and most effective rear car bumper protector on the market. The 2" thick foam core is lightweight and perfect for cushioning parking bumps. Weather resistant rubber-like material is suitable for outdoor street parking as well as parking garages.
*** PLEASE READ BEFORE PURCHASING *** 1. Please make sure both your trunk and bumper can accommodate the product size (36", 42" or 48") you are looking to buy.
2. The ParkingArmor products are both tall and wide, therefore they are NOT recommended on bumpers that are very narrow (Ex: Toyota Rav4, Honda CRV) or rear engine vehicles (Ex: Porsche 911).
NOTICE: A properly fitted ParkingArmor should NEVER block, cover or come in contact with your vehicle's exhaust pipe(s). Product contact with a hot exhaust pipe may damage both the product and your vehicle. ParkingArmor is designed for use on parked vehicles only! Never drive or operate a vehicle with the ParkingArmor hanging outside of the vehicle.
6. BumperArmor (Monster Edition) - Heavy Duty Front Bumper Guard. Biggest & Toughest Flexible Rubber Front Bumper Protector !
Feature
ALL RUBBER CONSTRUCTION! Will not crack like plastic or rust like a metal license plate frame!UNIVERSAL FIT! Can mount directly to your vehicles front bumper or on top of your factory mounting bracket. Measuring 13.75" wide x 8" tall and 1.25" Thick
TWO-IN-ONE DESIGN! BumperArmor MONSTER EDITION acts as both a license plate frame and a front bumper guard.
MOAT DESIGN - HELPS ABSORB IMPACTS - Unique moat design on the backside for added shock absorption.
MILITARY GRADE FINISH - Black matte finish will blend in with any car and look like an OEM part.
Description
The BumperArmor MONSTER EDITION is a flexible rubber license plate frame and bumper guard in one. The unique frame design adds a clean style that will compliment any vehicle make and model. BumperArmor was designed for the "front bumper" and may not work on the rear bumper because of clearance issues on some vehicles (please see BumperArmor dimensions).BumperArmor Features:
(1) Soft flexible rubber material can be twisted and bent always returning to its original shape. Will never crack or rust like metal frames.
(2) Made from a durable all weather rubber that is perfect for any weather.
(3) Black matte finish will blend in with any car and look like an OEM part.
(4) Unique moat design on the backside for added shock absorption.
(5) Will fit most vehicles and factory brackets (Note: will not fit Volvo vehicles since the bolts on the Volvo mounting bracket are too short).
(6) Includes 1" zinc plated mounting screws and bolts.
(7) Taller and wider than a standard license plate frame for added parking protection
(8) Screws are recessed back from the frame, so it protects other vehicles.
(9) Available in two sizes (standard edition and monster edition).
WILL IT FIT MY VEHICLE?
Before purchasing please measure the distance between your license plate mounting holes. The BumperArmor mounting holes are spaced 7" apart from left to right, this is the standard hole spacing in most states. BumperArmor was designed to fit the front bumper for most vehicles, except Volvo (since the license plate bolts are welded to the factory bracket and are to short). We recommend using BumperArmor with the factory bracket. You can mount BumperArmor with either the top 2 or all 4 screws.
DIMENSIONS:
Monster: 13.75" wide x 8" tall and 1.25" Thick
Weight: 2.0 lbs
7. T-Rex Bumper Protector, Rear Bumper Guard for Cars
Feature
Universal fit: this bumper guard fits any car small and largeQuality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings dents and scratches when you park the car
Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in a breath
360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners
Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps
Description
T-Rex rear bumper protector, is a lightweight high quality bumper guard made of high density durable and All weather foam material that will absorb the impact of the car bumping in to your vehicle as he is trying to park.8. Flexy Frame Heavy Duty Front Bumper Guard
Feature
You will receive ONE (1) Heavy Duty Flexy FrameFlexyframe HD functions as a license plate holder and a front bumper guard. Flexyframe HD functions
Contains no metal parts so there nothing to rust, will not crack like plastic or wear like foam!
Designed to protect your license plate mounting screws from causing major damage to other vehicles!
Can mount directly to your vehicles front bumper or on top of your factory mount bracket.
Description
flexyframe is a state of the art, flexible, rubber bumper guard and license plate frame in one. Its sleek, sexy design will protect your car scratches, dents and dings due to minor fender benders and the careless parking of others. It is specifically designed to protect your vehicle 24 hours a day, 7 days a week without having to remove the bumper guard from your car.Our flexyframe HD is the Winner of the 2014 Best New Product of the year at the AAPEX show in Las Vegas! The reason why is:
Extra thick rubber all around offers extra protection for your vehicle. A must have for city drivers and street parkers.
Compliments the appearance of your vehicle, especially suv's, vans and muscle cars, without driving any attention to it. The sleek wrap around design blends seamlessly into the design of any car.
Patented screw guard design not only covers your unsightly screws but provides your bumper with dual protection against scratches, dents and dings.
flexyframe wraps your license plate inside of it insuring no metal will ever touch your car.
Upon impact the rubber frame compresses from both sides reducing the probability of paint chipping on your front bumper.
flexyframe will not rust, crack or peel and can withstand extreme temperatures.
flexyframe can be mounted to all makes/models and installation is quick and easy.
All this adds up to flexyframe keeping your car looking new and beautiful. Flex it and Protect it!
SCREWS ARE INCLUDED
We include (4) # 12 x 1 inch long screws with every order of flexyframe.
9. Plate Pocket by BumpTek (SLIM LINE Edition) - NEW PRODUCT!!!! Best Selling Flexible Rubber Front Bumper Guard, Front Bumper Protection, License Plate Frame. Flexible Rubber Cushions Parking Bumps!
Feature
Patent Pending "Plate Pocket" Design - Encases back and edges of licenses plate.Flexible Rubbery Material - Cushions Parking Related Bumps
All Weather - Extreme Cold And Hot Climates
License Plate Case and Bumper Guard IN-ONE
Sleek Design - Complements Any Vehicle
Description
The BumpTek (SLIM LINE EDITION) New Frame is sleeker and less bulky than other Plate Pocket models (street, extreme and classic models). Minimalist design frames your license plate beautifully covering the backside and edges of the plate. The super durable flexible rubbery material cushions parking related bumps.Dimensions:12.5" Width x 6.5" Height x 1 " thick (Spacing between screw holes is 7" center to center)
WEIGHT: 1 lbs
BUMPTEK ADVANTAGE: Why BumpTek Is Better?
(1) BumpTek's unique "Plate Pocket" encases the license plate in rubber for protection and support. Simply slide your license plate into the rear pocket through the opening on the top of the product and bolt it to your vehicle.
(2) Bend-it, flex-it and twist it, no problem! BumpTek is made from a super durable rubbery material that stays flexible in freezing temperatures. Will not crack or rust like metal or plastic license plate frames.
(3) Mounting screws are recessed into the rubber frame; so no protruding screws that can harm another vehicles bumper.
(4) Easy to attach. Simply bolt BumpTek to your front bumper (or existing license plate bracket) with the included size 1" inch #14 screws or bolts. Works with 2 or 4 screw attachment.
(2) While the hole spacing on most front license plates are standard, we recommend that you check the hole spacing on your license plate and compare it with our product specifications prior to purchasing.
(3) MAY NOT FIT SOME VOLVO VEHICLES: Volvo mounting screws are too short.
10. Body Armor TC2962 Ds Tacoma Rear Bumper
Feature
Most orders delivered 2-3 days when purchased from AutoPartsWAYComes with full manufacturer warranty
Most orders leave warehouse same day