Top 10 jumper wires adafruit for 2019
If you looking for jumper wires adafruit then you are right place. We are searching for the best jumper wires adafruit on the market and analyze these products to provide you the best choice.
If you looking for jumper wires adafruit then you are right place. We are searching for the best jumper wires adafruit on the market and analyze these products to provide you the best choice.
Best jumper wires adafruit
1. Adafruit Premium Female/Male 'Extension' Jumper Wires - 20 x 3" [ADA1953]
Feature
Adafruit Part Number: 1953Stock Type: Prototyping >> Jumper Wiring >> Female/Male
In Stock & Ready to Ship
Description
These Female/Male 'extension' jumper wiresfor making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have tons of different Jumper Wires available, in all shapes and sizes!
Note:The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
2. 758, Premium Male/Male Jumper Wires - 40 x 6" (150mm) (5 Items)
Description
758, Premium Male/Male Jumper Wires - 40 x 6" (150mm) (5 items)3. Adafruit Premium Male/Male Jumper Wires - 20 x 6" (150mm) [ADA1957]
Feature
Adafruit Part Number: 1957Stock Type: Prototyping >> Jumper Wiring >> Male/Male
In Stock & Ready to Ship
Description
These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have tons of different Jumper Wires available, in all shapes and sizes!
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
4. Adafruit Premium Female/Male 'Extension' Jumper Wires - 40 x 3" (75mm) [ADA825]
Feature
Adafruit Part Number: 825Stock Type: Prototyping >> Jumper Wiring >> Female/Male
In Stock & Ready to Ship
Description
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3"/75mm , 6"/160mm and 12"/300mm . If you want the female/female type or male/male type, we have those too!
Note:The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
5. Adafruit Premium Female/Female Jumper Wires - 40 x 12" (300mm) [ADA793]
Feature
Adafruit Part Number: 793Stock Type: Prototyping >> Jumper Wiring >> Female/Female
In Stock & Ready to Ship
Description
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" female header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3"/75mm , 6"/160mm and 12"/300mm . If you want the male/male type, we have those too!
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
6. ADAFRUIT INDUSTRIES 758 MALE TO MALE JUMPER WIRES 40 X 6 INCH (1 piece)
Feature
Adafruit Part Number: 758Stock Type: Prototyping >> Jumper Wiring >> Male/Male
In Stock & Ready to Ship
Description
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3"/75mm , 6"/160mm and 12"/300mm . If you want the female/female type, we have those too!
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
7. Jumper Wires Premium Female/Female Jumper Wires - 40 x 6 (1 piece)
Feature
Adafruit Part Number: 266Stock Type: Prototyping >> Jumper Wiring >> Female/Female
In Stock & Ready to Ship
Description
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors). They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. We recentlty updated these so they are in a 'ribbon strip' instead of individual wires. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We suggest picking up some extra-long break-away header pins as well , you can stick those into the sockets to turn the cables into female-male or male-female jumpers!
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
8. Adafruit Premium Male/Male Jumper Wires - 40 x 3" (75mm) [ADA759]
Feature
Adafruit Part Number: 759Stock Type: Prototyping >> Jumper Wiring >> Male/Male
In Stock & Ready to Ship
Description
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3"/75mm , 6"/160mm and 12"/300mm . If you want the female/female type, we have those too!
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
9. Jumper Wires Premium Female/Male Extension Jumper Wires - 40 x 6 (150mm) (1 piece)
Feature
Adafruit Part Number: 826Stock Type: Prototyping >> Jumper Wiring >> Female/Male
In Stock & Ready to Ship
Description
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3"/75mm , 6"/160mm and 12"/300mm . If you want the female/female type or male/male type, we have those too!
Note:The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
10. 3141, Premium Female/Female Raw Custom Jumper Wires - 40 x 6" (150mm) (10 Items)