Top 10 brake valve for 2019
If you looking for brake valve then you are right place. We are searching for the best brake valve on the market and analyze these products to provide you the best choice.
If you looking for brake valve then you are right place. We are searching for the best brake valve on the market and analyze these products to provide you the best choice.
Best brake valve
1. Wilwood 260-8419 Adjustable Proportioning Valve Knob
Feature
Knob Adjust1/8-27 NPT Inlet/Outlet
Description
WILWOOD;260-8419;Brake Proportioning Valves2. Allstar ALL48010 1/8" NPT Inlet/Outlet Manual Brake Shut-Off Valve
Feature
Brake shut-off valve is a manual type with a 1/8 npt inlet and outletValve has a 2,000 psi rating
Shut off valve measures 1/2 inch wide x 1-3/4 inch long x 1-9/16 inch tall
Sold each
Backed by a 90-day limited factory warranty
Description
Allstar 1/8 inch NPT Inlet/Outlet Manual Brake Shut-Off Valve is a manual type with a 1/8 npt inlet and outlet. The valve has a 2,000 psi rating. The shut off valve measures 1/2 inch wide x 1-3/4 inch long x 1-9/16 inch tall. It is backed by a 90-day limited factory warranty and sold individually.3. EVIL ENERGY Brake Line Lock Kit Roll Control Valve Silver
Feature
Line lock kit: Controls the front or rear brakes.A line lock is a device that allows the front brakes to lock independently of the rear brakes via a switch.For street and racing applications
Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.
Kit contains a heavy duty push button switch, switch bracket, coiled wire, rebuildable line-lock valve, fuse holder, and indicator light
Works with 12 -24 volt electric systems
Description
"Control to make the front and rear brakes synchronized. Hold the brake pressure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags. Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Works with 12 - 24 volt electric systems. This launch control is a sophisticated device that installs into your existing brake system. The easily installed solenoid provides the brake holding capacity you are looking for. It can be used for racing or for street applications if you need a hill holder while stopped on an uphill grade. This high quality solenoid can be used on either the front or rear brakes of your vehicle.Includes Switches: Yes.
Includes Indicator Light: Yes.
Includes Fuse: Yes
Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary."
4. Allstar ALL48025 Brake Proportioning Valve
Feature
Proportioning valves allows adjustment of front-to-rear brake bias with a simple twist of the knobValve provides up to 57 percent reduction and has fitting ports that are 1/8 npt
Valve also includes two fittings to adapt to 3/16 inch brake line
Dimensions are 1 inch long x 1-3/4 inch wide and 3-5/16 inch tall
Sold each
Description
Allstar Brake Proportioning Valve has a proportioning valve that allows adjustment of front-to-rear brake bias with a simple twist of the knob. The valve provides up to 57 percent reduction and has fitting ports that are 1/8 npt. The valve also includes two fittings to adapt to 3/16 inches brake line. The dimensions are 1 inches long x 1-3/4 inches wide and 3-5/16 inches tall. It is backed by a 90-day limited factory warranty and is sold individually.5. Wilwood Engineering 260-12627 Adjacent Proportioning Valve Knob Style (10mm X 1.0)
Feature
AdjustableKnob Style
Proportioning Valve
Description
Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.6. The Right Stuff PV71 Front Disc Conversion Proportioning Valve
Feature
Factory replacement blockFront Disc Rear Drum
Limited Lifetime Warranty
Description
The Right Stuff Detailing has been manufacturing and distributing Brake and Fuel systems for classic cars. Specializing in brake lines, fuel lines and disc brake conversion kits, brand covers all makes and models of American muscle cars including General Motors, Ford and Chrysler.7. GM Disc Drum Brake Brass Proportioning Valve Street Rod Classic Car & Truck
Feature
This is a good way to properly balance your brake system to ensure sufficient braking pressure.100% brand new proportioning valve
Brass finish
Disc/Drum application
Brake line ports are 1/2'' and 7/16''
Description
Description:Brand new GM brass proportioning valve Disc Drum brake applications. It performs all the necessary functions when using disc brakes in the front and drum brakes in the rear.This valve will reduce braking pressure to the rear when necessary to prevent the brakes from locking up. It also distributes the brake pressure evenly so that the disc brakes are not doing all the work. This valve will also act as residual pressure the rear drum brakes, allowing better responsiveness when the brakes are applied. It also has a brake warning light switch to alert you if there is any failure in the braking system.This valve is a great upgrade over the original and is a must when upgrading from drum to disc brakes. This is a GM style valve, but will work on almost any Ford, Mopar or Chevy as long as you have the right fittings. This valve is solid brass, making it long lasting and heavy duty.8. A-Team Performance DISC/DISC Disc Front Disc Rear Brake Brass Proportioning Valve PV4
Feature
A-Team Performance DISC/DISC Disc Front Disc Rear Brake Brass Proportioning Valve PV4Description
A-Team Performance DISC/DISC Disc Front Disc Rear Brake Brass Proportioning Valve PV4 This is a UNIVERSAL PV4 Combination-Proportioning Valve, Disc/Disc brakes, Brass; Exact Copy of Original AC DELCO style proportioning-combination valve in brass. carry individual proportioning valves for your customized application. Works on , and MOPAR. These combination-proportioning valves are based on the popular AC DELCO 172-1353(disc-drum) and 172-1361(disc-disc) valves. When upgrading your vehicle from drum to disc, this is a must. A-Team Performance parts are sold exclusively by Southwest Performance Parts.9. UTSAUTO Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve PV2
Feature
This combination-proportioning valves are based on the popular AC DELCO 172-1353(disc-drum) and 172-1361(disc-disc) valves.This PV-2 proportioning valve works on almost any Chevy or Ford street rod, classic truck, or muscle car.
Fits most OEM dual-reservoir type master cylinders.
Has standard 9/16"-18 and 1/2"-20 fittings.
For use with disc brake front and drum rear applications. Two lines out for the front. One line out for the rear. Inlet sizes are 1/2 in.-20 (Front) and 7/16 in.-24 (Rear). Outlet sizes to front are 3/8 in.-24 and rear outlet is 9/16 in.-18.
Description
Why choose UTSAUTO proportioning valve PV2?This is a UNIVERSAL Combination Valve, Disc/Drum brakes, Brass; Exact Copy of Original.
This is a UNIVERSAL PV2 combination-proportioning valves are based on the popular AC DELCO 172-1353(disc-drum) and 172-1361(disc-disc) valves. When upgrading your vehicle from drum to disc, these small items are a must.
New solid brass reproduction Brake Combination (Proportioning) Valve for 1978-1988 GM G-body and 1971-1981 Camaro & Firebird is an exact replacement for GM# 25509419.
Factory original brake combination valves were iron bodied and subject to considerable inner deterioration due to excessive absorbed moisture in brake fluid, especially when brake fluid was not replaced often enough.
If you receive an order that does not meet your expectations, please allow us the opportunity to fix the problem before leaving negative feedback or rating us. We want you to be happy with your purchase! Contact us via the Message Center. Thanks.
10. Wilwood 260-13190 Proportioning Valve