Top 10 best roof safety harness kits for 2019
Finding the best roof safety harness kits suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best roof safety harness kits suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best roof safety harness kits
1. KwikSafety (Charlotte, NC) TORNADO 1D Fall Protection Full Body Safety Harness | OSHA ANSI Industrial Roofing Tool Personal Protection Equipment | Construction Carpenter Scaffolding Contractor
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 1D Industrial Full Body Harness has one (1) Dorsal Ring that is located on the back of the Harness and is the primary fall arrester attachment. It can also be used for restraint and rescue. During a fall, our FBH directs the load through the shoulder straps and around the thighs. If a fall were to occur, the FBH will bring you to an upright position with a slight lean to the front. Some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 1D Full Body Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
Description
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness is great for any industry and any application. It has 1 -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. A Single (1) Dorsal Ring is located on the back of the Full Body Harness and is used as the primary fall arrester attachment. Water repellent safety webbing ergonomically supports back and hips while bearing the weight of the user as well as the weight of tools that may be attached. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety Single (1) Dorsal Ring Safety Harness meets or exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. Our KwikSafety Full Body Harness is a One Size Fits Most with a height range of 4'10" to 6'6"; and a weight range of 130 lbs. to 310lbs. If happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!2. Guardian Fall Protection (Qualcraft) 00815 BOS-T50 Bucket of Safe-Tie with Temper Anchor, 50-Foot Vertical Lifeline Assembly and HUV
Feature
Perfect set for home fall protection gearUniversal harness HUV (01101) with 5 points of adjustment for added comfort.Body Wear Velocity Harness (S - L)
Vertical Lifeline Assembly with Shock Pack, and permanently attached Positioning Device with 18" lanyard extension to keep device within reach
1Heavy Duty Temper Reusable Anchor (00455)
A Guardian Fall Product
Description
FEATURES: 1 Temper Anchor 50' VLA Shock Pack Positioning Device with 18" extension lanyard HUV harness Easy Carry and storageThe Guardian Fall Protection "Bucket of Safe-Tie" offers an all in one approach to fall protection. Each one includes a type of anchor, lanyard and harness conveniently carried in a storage device.3. Guardian Fall Protection 42002 Velocity Cable SRL, 30'
Feature
Compact and lightweight designGalvanized cable or web lifeline
Carabiner included
Meets or exceeds all OSHA & ANSI standards
Numerous lengths available
Description
The new Velocity SRL series from Guardian Fall Protection includes models with lengths ranging from 16' - 100', and is available with lifelines composed of either galvanized cable or webbing. Velocity SRLs feature swivel tops and swivel snap hooks, as well as lightweight and durable glass-filled nylon housing.4. KSEIBI 421020 Safety Fall Protection Kit, Full Body Harness, with 6" Lanyard Standerd size -up to 42" waist and bag
Feature
Premium quality steel buckles reduce both the carried weight and required energy required for all-day job performance. Three high quality steel D-rings: at back and hips. Five points of adjustment. Notched pass through chest buckles fasten without twistingPolyester webbing with powder coated steel metal fittings
Fully Adjustable Universal Fit for XL and XXL Sizes All in ONE Harness
Multi-Pur pose Harnesses include rear D-rings and are ideal for use as a general harness in a variety of applications.
RESTRAINT ROPE LANYARD 1.0 mtr length, abrasion resistant thimble to protect the loops from being damaged by metallic contact and the Steel Scaffold Hook made from High forged alloy steel material with gate opening 55 mm.
Description
Features:
Full body harness are designed to arrest the most severe free falls
Multi-Pur pose Harnesses include rear D-rings and are ideal for use as a general harness in a variety of applications.
Polyester webbing with powder coated steel metal fittings
RESTRAINT ROPE LANYARD 1.0 mtr lenght, abrasion resistant thimble to protect the loops from being damaged by metallic contact and the Steel Scaffold Hook made from High forged alloy steel material with gate opening 55mm.
Safety Information:
These full body harnesses are designed for use by persons with a combined weight (clothing, tools, etc.) of no more than 320 lbs. Make sure all of the components in your system are rated to a capacity appropriate to your application.
When working with tools, materials, or in high temperature environments, ensure that associated fall protection equipment can withstand high temperatures, or provide protection for those items.
This equipment must be installed and used by persons trained in its correct application and use.
If the full body harness has been subjected to fall arrest or impact forces it must be immediately removed from service and destroyed
From Factory:
KSEIBI full body harness is a body holding device used to protect workers from falls by distributing the force of the fall over a large area of the body, ensuring that the subject of the fall remains suspended in an upright position after the fall has occurred. It is designed to minimize the risk of injuries caused by suspension. Body belts were previously used in fall protection.
5. Peakworks Fall Protection V8252366 OSHA/ANSI Compliant Safety Harness and 6 ft. Lanyard Kit
Feature
Harness (Universal Fit): quick connect chest and leg mating buckles allow for simple adjustability to ones size for all day comfort: 310 lb weight capacity.anyard: 6' rip stitch shock absorbing lanyard is made with a superior, heavy duty 1 3/4" polyester webbing for maximum strength, resists abrasion and harmful UV rays, designed to tear the inner webbing to reduce the force the worker feels to an acceptable level in case a fall were to occur.
All-in-One Kit: rip stitch lanyard is permanently attached to rear of harness for continuos connectivity
Snap Hook (1): Includes a double locking snap hook; zinc plated steel with minimum breaking load of 5000 lbs.
OSHA Compliant: Meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1; Hardware Meets ANSI Z359.12-2009
Description
Peakworks (4400-BA1CKTS) V8252366 - (3) point adjustable harness in chest and legs with sewn attached 6' shock pack lanyard. The Peakworks compliance harness kit offers comfort and dependability. Quick connect chest and leg buckles allow for simple adjustability. Tear-away shock absorbing lanyard is permanently attached to the rear of the harness. Includes a double locking snap hook. An excellent low cost, compliant harness lanyard kit for a variety of at-height applications where one needs to protect themselves from a potential fall.6. Fall Tech 8595A Contractor Harness with 4 Piece Roofer's Kit, Universal Fit
Feature
UniFit full body harness3' shock absorbing lanyard with integral trailing rope grab
50' vertical lifeline and hinged reusable roof anchor packed in a 5 gallon reusable bucket
Description
When you know how you are going to address your fall hazard and your equipment needs are uncomplicated, we have your solution. Roofers kits, Looped Lanyard and Harness Combinations and Bagged Harness and Lanyard Kits are available to quickly address your problem and get you back to work. We know that the stakes are high. And, when it comes to worker safety, there are no second chances. That is why Fall Protection is all we doand we take it seriously. Advanced technical design and rigorous quality testing are the backbone of FallTechs manufacturing process. We train and staff fall protection experts that understand problems, not just fall protection products, and can identify fall safety solutions that save lives. At FallTech, we engineer innovative fall safety solutions as though lives depend on it. Because they do.7. Protecta 1191209"Pro Line" Construction Vest Style Full Body Harness, Medium/Large, Red/Gray
Feature
BACK D-RING: Provides a safe connection point for your fall arrest system, and keeps you upright after a fall for added safety.TOOL AND EQUIPMENT RINGS: Four equipment rings provide easy access to extra tools and gear.
SHOULDER PADS: Helps disburse weight over wider area of shoulders for added comfort.
DURABLE POLYSTER WEB CONSTRUCTION: Lightweight and extremely strong polyester webbing provides ultimate durability and longevity.
IMPACT INDICATOR: Rip-stitch indicators allow you to inspect the harness at a glance, for prior damaging impact loads.
PARACHUTE TORSO ADJUSTERS: Completes the 5-point adjustment system for a perfect fit.
Pro harnesses have a ergonomically designed chassis for better fit and function
Back dee ring for fall protection and side dee rings for positioning
Tongue buckle leg straps for secure and easy donning
Integrated hip pad and shoulder pads for the ultimate in comfort
Tongue buckle body belt and side dee rings for added comfort and support when positioning
Description
With designs that incorporates improved fit, updated colors, and durable yet lightweight construction, PRO harnesses provide greater comfort and added safety which translates to reduced worker fatigue and increased productivity. Protecta has many of the same features as higher priced equipment, such as ergonomic design, impact indicators, serial numbers, steel hardware and options for specialized needs and budgets. Go with PRO gear incorporating exceptional performance and value - compliance has never been so easy or economical!8. Malta Dynamics Warthog Safety Harness Fall Protection with Tongue Buckle Legs, Full Body Harness for Construction - OSHA/ANSI/CSA Compliant, (XX-L)
Feature
Meets ANSI Z359.1-2007, ANSI A10.32-12Compliant with OSHA 1926 Subpart M, OSHA 1910
Worker Capacity Range: 130-310 lbs
Break Away Lanyard Keepers
Fall Indicator
Description
The Malta Dynamics Warthog 5 - Point Full Body Harness with Tongue Buckle Legs is the best available economy harness on the market. The Warthog has dual lanyard keepers to hold lanyards out of the way while working. The Warthog also comes with a customizable patch where workers can record information on harnesses without jeopardizing webbing integrity. The Warthog is designed for efficiency and affordability while meeting the strict ANSI and OSHA testing requirements and standards.9. Peakworks V8257275 Fall Protection, Contractor/Industrial Roofer's Kit, 50 ft, Universal Size Harness
Feature
Harness: Class A harness, universal size, meets ANSI & OSHA standards, CSA certifiedRope Grab: manual rope grab, with integral 3 ft. shock absorbing lanyard, meets ANSI & OSHA standards
Vertical Lifeline: 5/8 inch, 50 ft. in length
Roof Bracket: reusable roof bracket, 5,000 lb. breaking strength, 1 user, meets ANSI & OSHA standards
Meets the new OSHA residential construction regulation - complete roofer kit provides all the necessary components to help meet federal OSHA compliance
Description
Peakworks fall protection Roofer's Kit RK6-50 - includes harness, rope grab, 50' vertical lifeline, reusable foof bracket. Complete roofer's kit provides all the necessary components to help meet federal OSHA compliance for residential construction. Effective March 15, 2013, Federal regulations under 29 CFR 1926.501(b)(13) requires all workers engaged in residential construction six feet ( 1.8 m ) or more above lower levels to be protected by a conventional fall protection system. The Peakworks Kit provides that protection and compliance.10. KwikSafety (Charlotte, NC) HURRICANE | OSHA ANSI Fall Protection Full Body Safety Harness w/Back Support | Personal Protective Equipment | Dorsal Ring Side D-Rings | Construction Industrial Roofing
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness with Back Support supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness with Back Support has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps & around the thighs bringing you to an upright position with a slight frontal with some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness with Back Support is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.