Top 10 best co2 laser power supply 2019
Finding the best co2 laser power supply suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best co2 laser power supply suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best co2 laser power supply
1. Cloudray 40W PSU Laser Power Supply 110V/220V for CO2 Laser Engraver Cutter MYJG 40W
Feature
Good compatibility: it can be applicable to 30-40W Laser Tube manufactured by various factories.Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
Easy control: the start and stop of laser can be easily controlled by TTL level.
The power supply has output open circuit protection and a buttonto test to output laser manually.
Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Description
Feature:1. Good compatibility: it can be applicable to 30-40W Laser Tube manufactured by various factories.
2. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
3. Easy control: the start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. The power supply has TTL signal indication, water through signal indication and laser output indication.
6. This power supply has the Buttonto test output laser manually.
7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Pin Definition:
*P1:
1--L-: Connect Negative Electrode of Laser Tube.
2--FG: Connect with G Internal, and Connect the Power Supply Shell.
3&4--AC AC: AC 110V/220V Input.
*P2:
1--G Signal Ground:The foot must connected with laser machine's enclosure and ground properly.
2--P Input Signal:Water Protction Switch.
3--L Input Signal:The control of laser: Low Level, emitting laser
4--G Signal Ground : The foot must connected with laser machine's enclosure and ground properly.
5--IN Input Signal :Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control
6--Output Power: 5V,Max output Current 50mA
*P3:
1--24V:output 24V,Max Current 2A,power for master board.
2--G:24V and 5V Ground.
3--5V:output 24V,Max Current 1A.
4--L:The control of laser: Low Level, emitting laser
2. Cloudray 100W Co2 Laser Power Supply 110V PSU DY13 for RECI Z2/W2/S2 Co2 Laser Tube Buy More Discounts
Feature
This power supply is specially designed forReci W2/S2 90-100W laser tube.Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
Easy control: the start and stop of laser can be easily controlled by TTL level.
The power supply has TTL signal indication, water through signal indication and laser output indication.
Application: Replacement Parts for CO2 Laser Tube and CO2 Laser Engraver /Cutter / Marker
Description
1. This power supply is specially designed forReci W2/S2 90-100W laser tube. The power supply makes laser tube output larger and more stable.
2. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
3. Easy control: the start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. The power supply has TTL signal indication, water through signal indication and laser output indication.
6. This power supply has the Buttonto test output laser manually.
7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Specification:
Input:
Input Voltage: AC110V
AC frequency: 47 - 440HZ
Max Input power: 550W
Max Input current: 8A
Output:
Max output voltage: DC40KV
Max output current: DC28mA
Efficiency: >/=90%(Full load)
MTBF: >/=10000 Hours
Response speed: 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current)
Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.
Environment: Operating temperature: (-10-40)degree Celsius,Relative humidity: 90%
Cooling: Forced air cooling (fan cooling)
Packing List:
Laser power supply 100w x 1pcs
3. 60W CO2 Laser Power Supply T Series HY-T60 Plus 110V for CO2 Laser Tube by Cloudray Buy More Discounts
Feature
High Efficiency, Fast Response and Strong Adaptability.Simple Port Control , T TL level signals can control the laser start / stop.
Laser Power Adjustment : input OV to 5V analog signal , can also input PWM signal.
Open Circuit Protection Function : avoid the damage to laser power supply due to laser tube burst.
The power supply T60 is guaranteed for ten months. The T60 Plus guaranteed for sixteen months.
Description
Main Features:
1.Good Compatitility:It can be applicable to 50w laser tubes.
2.Good power stability and strong adaptability, It can prolong the laser tube service life.
3. Easy to control: the start and stop of laser can be easily controlled by TTL level.
4. Output open circuit protection.
5. TTL signal indication, water through signal indication and laser output indication.
6. Come with the BUTTON to test output laser manually.
7. Application: sculpture and cut acrylic, fabric, double color sheet and rubber, etc.
Packing List
Power Supply*1PCS
The power supply T60 is guaranteed for ten months. The T60 Plus guaranteed for sixteen months.4. 40W 50W CO2 Laser Power Supply for CO2 Laser Engraver Cutter MYJG-50 110V / 220V
Feature
Good compatibility: it can be applicable to 50W laser tube manufactured by various factories.Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
Easy control: the start and stop of laser can be easily controlled by TTL level.
The power supply has output open circuit protection.
The power supply has TTL signal indication, water through signal indication and laser output indication.
Description
Specifications:- Input Voltage: 100V-AC230V
- AC frequency: 47-440HZ
- Max Input power: 440W
- Max Input current: 3A
- Max output voltage: DC 22KV
- Max output current: DC 22mA
- Efficiency greater than or equal to 90%(Full load)
- MTBF greater than or equal to 10000 Hours
- Response speed less than or equal to 1ms(Time from the TTL Signal is given to the output current up to 90% pre-setting current)
- Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.
- Environment Operating temperature:(-10-40)degree
- Celsius,Relative humidity: less than or equal to 90%
- Cooling: Forced air cooling (fan cooling)
- TH: Input Signal, Switch Light Control,High Level(greater than or equal to 3V)-Bright dipping,Low Level(less than or equal to 0.3V)-No Light Dipping
- TL: Input Signal, Switch Light Control.High Level-No light Dipping,Low Level(less than or equal to 0.3V)-Bright Dipping
- 3WP*1: Input Signal, Switch Light Control,High Level(greater than or equal to 3V)- No light Dipping,Low Level(less than or equal to 0.3V)-Bright Dipping
- G :Signal Ground, The foot must connected with laser machine's enclosure and ground properly.
- IN*2 :Input Signal, Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control 6 5V Output Power 5V,Max output Current 20mA
Shipping Times:
- Expedited Shipping 4-5 wroking days from China to USA by DHL, Fedex or UPS.
5. Iglobalbuy 50W 110V Laser Power Supply for CO2 Laser Engraver Engraving Cutter Machine
Feature
This less than 1ms response speed 50 W laser power supply support any CO2 laser for up to 50W, dramatically lengthen the service life of laser,widely used in engraving, seal-cutting, etc.Easy Control: The start and stop of laser can be easily controlled by TTL level;The protection switch to test the external water, ventilation, etc
With High Security: input and output of power supply are separated completely to avoid getting an electric shock
New function: timely scene judging which part is damaged, laser tube or laser power
Quality assured: Each laser power supply will be tested by full load condition for 12 hours for aging test,stop the power test after 500 times, so each power supply is with 2 year warranty
Description
Feature:Protection switch: test the external water, ventilation, etc., to protect laser device
TTLvoltage level control:can be settinghigh or low lever
Good compatibility: it can be applicable to 50W laser tubes from different manufacturers
High security: The input and output of power supply are separated completely to avoid getting an electric shock
Open circuit protection: with well-grounded enclosure, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply
Application:
The power is adjustable through it's TTL control or by a 5K variable resistor, small design with excellence PWM control circuitry. It supports any CO2 laser for up to 50W. Application for engraving, seal-cutting, etc.
Specifications:
Output power: 50W
Input voltage: AC110V-220Vadjustable
Maximum output voltage: DC 25KV
Maximum output current: DC 15-20mA
Operating temperature: 14~104/-10~40
Cooling way: natural air cooling
Relative humidity (RH): 90%
Efficiency: 90% (full load)
Response speed: 1ms (from the switch Signal is given to the output current up to 90% of the setting current)
Pressure-proof: Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell
Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Package Include:
1x 50W Power Supply
6. Cloudray 80-100W CO2 Laser Power Supply 220V for CO2 Laser Engraver Cutter MYJG-100 Buy More Discounts
Feature
Good compatibility: it can be applicable to 80-100W Laser Tube manufactured by various factories.Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
Easy control: the start and stop of laser can be easily controlled by TTL level.
The power supply has output open circuit protection, TTL signal indication, water through signal indication and laser output indication. And the Buttonto test output laser manually.
Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Description
Features:
1. Zero-current half-bridge soft-switching circuit. Highefficiency and fast response. Match various
manufacturers of laser tubes.
2. Simple Port Control,TTL level signalscan control the laser start/stop.
3. Protection switch is to check the outsidewater, ventilation, etc.
4. Laser Power Adjustment: input 0V to 5V analogsignal, can also input PWM signal.
5. Open Circuit Protection Function: avoid the damageto laser power supply due to laser tube burst.
6. Factory Aging Test: 1. Each power supply will go through60 and 12 hours aging test under full load. 2. 500 times 7 secondsStart / Stop test.
Connection:
1.Laser Tube connection: (Refer to Power supply and laser Device's connection Diagram) High voltage terminalof MYJG-100 power supply should be connected to the positive pole of CO2 laser device. Current circuit ofthe power supply shall be connected to negative pole (laser output terminal) of laser device, through an amperemeter or directly.
2.Connection of control signal( Refer to Power supply and control board's connection Diagram) The control signalshall be reliably connected to control terminal of the power supply MYJG-100,after connecting the DAC output signaland TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lampcan not work properly, should check the control signal whether correct or not(include check the voltage specificationand logic),if use PWM control as power control,make sure f20KHz,Amplitude (peak value) 5V,Check andprotectionswitch WP connection is correct at same time.
3.Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosureprotection and so on.
7. Iglobalbuy 40W AC 110V/220V Co2 Laser Power Supply for CO2 Laser Engraving Engraver Cutting Cutter Machine
Feature
The start and stop of laser can be easily controlled by TTL level. The protection switch to test the external water, ventilation, etc.The 40w co2 laser power supply with high performance and large cutting power. It laso can timely scene judging which part is damaged, laser tube or laser power.
This 40w laser power supply supports any co2 laser for up to 40W, dramatically lengthen the service life of laser,widely used in engraving/ sculpture, seal-cutting, cut acrylic, fabric, double color sheet and rubber etc.
The power supply has output open circuit protection and a buttonto test to output laser manually. Each laser power supply will be tested by full load condition for 12 hours for aging test,stop the power test after 500 times.
Input and output of power supply are separated completely to avoid getting an electric shock. It can work in open-circuit condition for a short time (Require a good protective grounding and avoid arc between the positive and the machine shell).
Description
Key Features:With less than 1ms good response speed
Protection switch: test the external water, ventilation, etc., to protect laser device
TTL voltage level control: can be sethigh or low lever
Good compatibility: it can be applicable to 40W laser tubes from different manufacturers
Open circuit protection: with well-grounded enclosure, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply
Specification:
Output power: 40W
Input voltage: AC 110V-220V adjustable
Maximum output voltage: DC 25KV
Maximum output current: DC 20mA
Environmental requirements: temperature -14-104/-10~ 40
Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s
Relative humidity:85%
Cooling way: natural air cooling
Response time (from time of input being available to the output current being up to nominal value):1ms
Application:
The power is adjustable through it's TTL control or by a 5K variable resistor, small design with excellence PWM control circuitry. It supports any CO2 laser for up to 40W. Application for engraving, seal-cutting, etc.
Laser power adjustment:
By adjusting the output current of power supply through resistor
Through PWM control (magnitude being TTL voltage level)
Package Included:
1x 40W Power Supply
8. Cloudray CO2 Laser Power Supply W/Monitor 80-100W AC90-250V DIY Replace Part for EFR Tube & CO2 Laser Engraver Cutter
Feature
High intelligence: Built-in control, can communicate with motion controller,and it can communicate with max 32pcs power supplies by cascade connecting, then the controller panel can display working condition of power supply, very easy for user to monitor and judge the fault.Make the maintenance much easier: User can judge the problem by himself. Multi-function LCD screen: One LCD screen can show the information of two power supplies, easy use for multi-head machine.
Universal: With PFC function, AC90-250V input voltage range, globally universal.
Open circuit protection: When the high voltage end is in open circuit or not connected well, the power supply will start automatic protection, to prevent high voltage arc effectively.
More safety: With high voltage discharge function, no residual voltage when turning off, safer for user.
Description
Main Features:
High intelligence:
Built-in control, can communicate with motion controller,and it can communicate with max 32pcs
power supplies by cascade connecting, thenthe controller panel can display working condition of power supply,
very easy for user to monitor and judge the fault.
Make the maintenance much easier:
User can judge the problem by himself.
Multi-function LCD screen: One LCD screen can show the information of two power supplies, easy use for multi-head
machine.
Universal:
With PFC function, AC90-250V input voltage range, globally universal.
Open circuit protection:
When the high voltage end is in open circuit or not connected well, the power supply will start
automatic protection, to prevent high voltage arc effectively.
More safety:
With high voltage discharge function, no residual voltage when turning off, safer for user.
Excellent cover with patent design:
Good appearance, better heat dissipation.
Improved current control mode, more stable laser, better compatibility.
Specification:
Input voltage:AC90-250V
AC frequency:47---440Hz
Max input power:500W
Max input current (when 90V input):6A
Max output voltage:40KV
Max output current:28mA
Efficiency:90%(when full load)
MTBF:10000 hours
Response speed:1mS(the time from the signal is given to output current reaches 90% of set current)
Switch control mode: TTL
Power control mode:PWM(>20KHz or 0-5V or 0-3.3V analogue
Communication mode:Special serial port
Withstand voltage:Input-output, input-shell:AC1500V 10mA 60s
Working environment:Input-output, input-shell:AC1500V 10mA 60s
Cooling:Force air cooling
<9. Cloudray 100W CO2 Laser Power Supply 110V for CO2 Laser Engraver Cutter MYJG 100
Feature
Good compatibility: MYJG-100G can be applicable to 100W Laser Tube manufactured by various factories.Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
Easy control: the start and stop of laser can be easily controlled by TTL level.
The power supply has output open circuit protection and a buttonto test to output laser manually.
Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Description
Main Features:
1. Good compatibility: MYJG-50G and MYJG-50W can be applicable to 50W Laser Tube manufactured by various factories.MYJG-60G and MYJG-60W can be applicable to 60W Laser Tube manufactured by various factories.MYJG-80G and MYJG-80W can be applicable to 80W Laser Tube manufactured by various factories.
2. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
3. Easy control: the start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. The power supply has TTL signal indication, water through signal indication and laser output indication.
6. This power supply has the Buttonto test output laser manually.
7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Packing List:
CO2 Laser Power Supply * 1PCS
10. Cloudray 1.5 Meters High Voltage Cable and Connector for CO2 Laser Power Supply and CO2 Laser Tube Buy More Discounts
Feature
Available power supply: 40w,50w,60w,80w,100w,130w,150w etc.Wire length: 1.5M / 1500mm
High voltage wire between the CO2 power supply and CO2 laser tube for laser cutting machine
Description
High voltage wire between the CO2 power supply and CO2 laser tube for laser cutting machine
Main Features
Wire length: 1.5M / 1500mm
Available power supply: 40w,50w,60w,80w,100w,130w,150w etc.