Thing need consider when find mixer lamp xlr?
When you looking for mixer lamp xlr, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable mixer lamp xlr is not an easy task. In this post, we show you how to find the right mixer lamp xlr along with our top-rated reviews. Please check out our suggestions to find the best mixer lamp xlr for you.
When you looking for mixer lamp xlr, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable mixer lamp xlr is not an easy task. In this post, we show you how to find the right mixer lamp xlr along with our top-rated reviews. Please check out our suggestions to find the best mixer lamp xlr for you.
Best mixer lamp xlr
1. Flexible 0.5W LED Gooseneck XLR Console Light 12 volts 18 inches LED Console Lamp for Mixers (3pin 12V XLR)
Feature
Dedicated 12 Volt Flexible Gooseneck LED Light for Mixing Consoles / MixersHigh efficiency more light for less energy
Connector : 3 Pin XLR (12 +) / 4 Pin XLR (34 +) / BNC (12-Volt) / USB (12-Volt)
NOTE : This led lamp works ONLY on Specific 12-Volt Task Light Socket, please make sure your equipment has one before purchase
Length : approx. 18 inches / 45 cm
Description
Specifications:Input DC 12V
Length approx. 18 inches (45cm)
Notice Before Purchase
Read the manual of your mixer device and check the data sheet.
Then choose what you need according to the positive and negative pole of our LED light needles.
If the LED light cannot match the corresponding needle of your equipment, please don't make purchase, because you will need to re-welding it by yourself which requires professional technology knowledge.
In this case, we recommend our New Arrival Product : Automatic Series - Automatically adjust the voltage(5.5V-16V), distinguish between positive and negative pole, Suitable for most of Musical Console Mixer.
-Rejea 5.5V-16V Voltage Automatically Adjustable LED Console Lamp
Note: This lamp will not work on Normal 3 Pin XLR/ 4 Pin XLR/ BNC connectors( because of Volt issue), make sure your mixing console has the Specific 12-Volt Task Light Connector for this led lamp.
Q: How does this lamp work?
A: Consoles require a dedicated 12-volt task light connector for use of this lamp. So this lamp will not operate on a phantom powered mic input. Because the standard for phantom power is +48 volts applied to BOTH sides of the audio signal pair through two resistors, with the V- connected to ground and shield, too high for efficiently driving LED.
Durable & long-lasting LEDs, High efficiency more light for less energy.
Cool operating temperatures adjust without burning your fingers.
Have tested with following models
4 Pin XLR
Behringer X32
Midas M32
BNC connector
Crest 12M
SOUNDKING AS3208, MIX32AU
Peavey CD MIX 7032A VENUE SC48, Screen Pro2,
Mackie Onyx 24.4 console
USB
Soundcraft Si Impact
2. Allen & Heath LED-Lamp-X 18-Inch LED Gooseneck Lamp for GL Series Consoles with 4-Pin XLR Connection
Feature
Illuminates GL series audio consoles18-inch LED lamp
Adjustable gooseneck
4-pin XLR connection
Black lamp
Description
Designed to illuminate Allen & Heath GL Series audio consoles, this convenient LED lamp features an 18-inch adjustable gooseneck and 4-pin XLR connection. Allen & Heath is known for building high quality mixers for the last 40-plus years. At any time of day or night, across the globe, there is an Allen & Heath mixer out there working hard, sounding great and making life a little easier for the person at the controls. Back in the early 1970s, Allen & Heath hand-built consoles in a tiny factory in London for elite bands like Pink Floyd and The Who. These days Allen & Heath customers are spread across almost every environment imaginable, including touring, theatres, churches, nightclubs, TV and radio stations, recording studios and countless other places where great sound matters.3. 1.5W 12 volts LED Console Lamp for Musical Console Mixer 27.17 inches (4Pin 27.17 inches New)
Feature
12 Volt Flexible Gooseneck LED Light for Mixing ConsolesHigh efficiency more light for less energy
2 Connectors for choices : 3 pin XLR (12 +) / 4 pin XLR (34 +)
NOTE : This lamp requires Specific 12-Volt Task Light Socket, please check your equipment before purchase
Different Length for choices : 23.72 inches (60cm) / 27.17 inches (69cm)
Description
Specifications:Input DC 12V
Length approx. 23.72 inches (60cm) / 27.17 inches (69cm)
2 kinds of connector for choice: 3 Pin XLR/ 4 Pin XLR
Positive and Negative Pole Data:
3 PIN XLR (12 +)
4 PIN XLR (34 +)
Notice Before Purchase:
Read using instruction of your equipment and check the data sheet.
Then choose what you need according to positive and negative pole of our LED light needles.
If the LED light cannot match the corresponding needle of your equipment, please don't make purchase, because you will need to re-welding it by yourself which requires professional technology knowledge.
In this case, we recommend our New Arrival Product : Automatic Series - Automatically adjust the voltage(5.5V-16V), distinguish between positive and negative pole, Suitable for most of Musical Console Mixer.
-Rejea 5.5V-16V Voltage Automatically Adjustable LED Console Lamp
Note: This lamp will not work on Normal 3 Pin XLR/ 4 Pin XLR connectors( because of Volt issue), make sure your mixing console has the Specific 12-Volt Task Light Connector for this led lamp.
Q: How does this lamp work?
A: Consoles require a dedicated 12-volt task light connector for use of this lamp. So this lamp will not operate on a phantom powered mic input. Because the standard for phantom power is +48 volts applied to BOTH sides of the audio signal pair through two resistors, with the V- connected to ground and shield, too high for efficiently driving LED.
Durable&long-lasting LEDs, High efficiency more light for less energy.
Cool operating temperatures adjust without burning your fingers.
The flexible gooseneck design offers functionality anywhere a 12Volt 3Pin XLR/4Pin XLR light socket is available
Have tested with following models:
Behringer x32
SOUNDKING AS3208, MIX32AU,
Peavey CD MIX 7032A VENUE SC48, Screen Pro2,
Mackie Onyx 24.4 console
4. Behringer 18X-HI4 High Intensity 5-Watt Halogen 18" Gooseneck Lamp with 4-pin XLR Connector for X32 Digital Mixer
Feature
Behringer 18X-HI4 High Intensity 5-Watt Halogen 18" Gooseneck Lamp - Behringer 3 Year Limited WarrantySize: 18" / 45.72cm
Connector: 4-Pin XLR
Power: 5 Watt
Compatibility: X32 Digital Mixer
Description
The Behringer 18x-HI4 is a high intensity 5-Watt halogen 18" gooseneck lamp with 4-Pin XLR connector, designed for use with the X32 digital mixer.5. Allen & Heath 18-Inch LED Straight Neck Lamp with Dimmer Control and 4-Pin XLR Connector
Feature
18-inch LED lamp illuminates control panel of consoles and mixersIlluminates ML, PA, GL4000, and Mix Wizard products
Straight neck, dimmer control
Cool white LED light produces less heat and consumes less energy than traditional bulb
4-pin XLR connector
Description
Allen & Heath's 18-inch LED lamp illuminates the control panel of consoles and mixers. It is powered by connecting it to a 4-pin XLR connector. It features a straight neck with a dimmer control, and is compatible with all ML, PA, GL4000, and Mix Wizard products. The lamp uses a cool white LED light that produces less heat and consumes less energy than a normal filament lamp. Connect this lamp to any equipment with a 4-pin XLR connector to illuminate the face of your console or mixer. The cool white LED light produces less heat and consumes less energy than a traditional bulb. Allen & Heath is known for building high quality mixers for the last 40-plus years. At any time of day or night, across the globe, there is an Allen & Heath mixer out there working hard, sounding great and making life a little easier for the person at the controls. Back in the early 1970s, Allen & Heath hand-built consoles in a tiny factory in London for elite bands like Pink Floyd and The Who. These days Allen & Heath customers are spread across almost every environment imaginable, including touring, theatres, churches, nightclubs, TV and radio stations, recording studios and countless other places where great sound matters.6. Marantz Professional Sound Live 12 | 12-channel / 2-Bus Tabletop Mixer with 7 XLR Inputs + Mic Preamps
Feature
7 XLR inputs with Marantz Professional microphone preampsUSB audio connectivity with level control; USB jack to power lamps or charge mobile devices
Dynamic compression (Channels 1-4); 3-band EQ plus 2 aux-sends per channel
100 studio-grade digital effects
Headphone out with independent level control
Description
The Marantz Professional Sound Live 12 is a pro 12-channel, 2-bus mixer equipped with the tools you need to create the perfect mix.
With flexible routing options and a multitude of onboard DSP tools, Sound Live 12 fits the demands of nearly any live performance environment. It features 7 balanced XLR inputs with switchable phantom power, 3-band EQs for additional tonal shaping, two aux-sends per channel for external effects and monitoring, and a 9-band graphic EQ for main or monitor outputs.
A headphone jack with an independent level control enables additional monitoring and mixing. 60mm faders with LED meters provide precise control and visual feedback for accurate, hands-on mixing.
Sound Live 12s high headroom results in cleaner mixes, a purer signal path, and loud, punchy audio. Onboard analog compression (channels 1-4) helps control dynamics and gel instruments together for a cohesive, defined mix.
Frequently Asked Questions
Can I use the Sound Live mixer to record into my computer?
Yes. The Sound Live 12 mixer has a USB connection that carries 2 channels of audio from the MAIN output channel of the mixer to your computer. The USB connection also allows you to send audio from your computer back to the last channel of the mixer.
Is phantom power enabled per-channel or for all channels simultaneously?
Phantom power supplies +48V to the XLR mic inputs and the LED next to the button will light up. This will enable phantom power for all channels simultaneously.Please note:that most dynamic microphones do not require phantom power, while most condenser microphones do. (Consult your microphones documentation to find out whether it needs phantom power.)
How is the built-in compressor controlled?
The COMP knob controls both the threshold and makeup gain for the compressor. The LED next to the knob will light up when the compressor is on.
Why isn't my mobile device charging when I plug it into USB port on top of the mixer?
The USB power outlet on the top of all Marantz Pro Sound Live mixer is a 5V 1A power supply and may charge your personal devices slower than a proper outlet. To optimize the charging speed of your device, try lowering your screen brightness and closing unused applications.
What is the DFX BYPASS jack for?
This input allows you to use a standard 1/4 (6.35mm) latching-style footswitch (sold separately) to toggle the mixer's internal effects processor (when thefootswitch is in its closed position).
What does the green SIG light indicate?
When the green SIG light blinks on a channel, it means that a level of 2dBU has been reached. For optimum performance, try to only have this illuminate at your signals highest peaks.
What is the difference between the Sound Live 8 and Sound Live 12?
Sound Live 8:
- 5 XLR inputs with Marantz Professional microphone preamps
- 2 Channels of Dynamic compression (Channels 1-2)
- Channels 1-6 offer a 75 Hz low frequency filter with an 18 dB/octave slope
- Dimensions:12.0 x 13.6 x 3.1 (305 mm x 346 mm x 80 mm)
Sound Live 12:
- 7 XLR inputs with Marantz Professional mic preamps
- 4 Channels of Dynamic compression (Channels 1-4)
- Channels 1-10 offer a 75 Hz low frequency filter with an 18 dB/octave slope.
- Dimensions:14.1 x 13.6 x 3.1 (358 x 346 x 80 mm)
Further Tech Support
Whether you are a customer or dealer, if you already own a Marantz Professional product, or if you just have pre-sales questions, the Marantz Professional technical support team is available to help!Visit the link below to connect with any of the following support options: phone support, email support.
- http://marantzpro.com/support
Technical Specifications
MONO INPUT CHANNELS
- Microphone inputs: Electronically balanced, discrete input configuration
- Frequency response: 20 Hz to 20,000 Hz, +0.5 dB
- THD+N: <0.02% at 0 dBu, 1,000 Hz
- Gain range: 0 dB to 45 dB (Mic)
- SNR: 90 dB
LINE INPUTS
- Electronically balanced
- Frequency response: 20 Hz to 20,000 Hz, +0.5 dB
- THD+N: <0.03% at 0 dBu, 1 kHz
- Sensitivity range: -15 dBu to 30 dBu
IMPEDANCES
- Microphone inputs: 51.1 k
- Channel insert return: 200 k
- All other inputs: >100 k
- 2-Track outputs: 10 k
- All other outputs: 20 k
EQUALIZATION
- High-shelving: 15 dB @ 12,000 Hz
- Mid-bell (mono): 15 dB @ 2,500 Hz
- Low-shelving: 15 dB @ 80 Hz
- Main EQ: 9 EQ bands (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz), 15 dB
DSP(DFX/Effects)
- A/D & D/A converters: 24-bit
- DSP Resolution: 24-bit
- Effects: 10 DSP effects families with 10 variations available per family
- Presets: 100 total
- Controls: Rotary encoder preset selector, DSP mute switch, peak LED indicator
MAIN MIX
- Noise (bus noise):
- -64 dBr (ref: +4 dBu, fader 0 dB, channels muted)
- -64 dBr (ref: +4 dBu, fader 0 dB, all input channels assigned and set to unity gain)
- Phantom Power: Mic Pin 2/Pin 3 and Pin 1 472V
POWER
- Main voltage: USA/Canada: 100120 VAC ~60 Hz
- Power consumption: 40 W
- Fuse: 1.25 A
- Main connection: Standard IEC receptacle
DIMENSIONS(width x depth x height): 14.1 x 13.6 x 3.1
WEIGHT: 9.0 lbs.
Box Contents
- Sound Live 12
- Power Cable
- User Guide
- Safety & Warranty Manual
7. VocoPro KJ-6000 2 Channel, 4 Mic Input Mixer With Digital Key Control and Vocal Eliminator
Feature
Professional karaoke vocal mixer can accommodate turntable, line audio (CD players) and video sources4 microphone inputs, including one XLR and three 1/4-inch
Digital Echo with Repeat and Delay controls for vocal enhancement
Vocal Eliminator feature removes the vocals in the center of a mix
Space-saving rack design takes up just 4 spaces
Description
KJ-60002 Channel, 4 Mic Input Mixer with Digital Key Control and Vocal Eliminator8. MAXTOMARS 12V 18" Gooseneck LED Console Lamp for Mixers (BNC Connector)
Feature
12V LED Lamp for MixersFlexible Gooseneck LED Light for Mixing Consoles
High efficiency more light for less energy. Cool operating temperatures adjust without burning your fingers
Connector : BNC
Length: 18 inch
Description
Features :
Input DC : 12 V
Length : 18 inch
Connector : BNC
Durable & long-lasting LEDs, High efficiency more light for less energy.
Cool operating temperatures adjust without burning your fingers.
The flexible gooseneck design offers functionality anywhere a 12V BNC light socket is available, including mixing consoles and equipment racks.
9. 5-Channel Home Audio Power Amplifier - Mixer w/ 70V Output - 600 Watt Rack Mount Stereo Receiver w/ AM FM Tuner, Headphone, Mic Talkover for PA System Great for Commercial Entertainment Use -Pyle PT610
Feature
600 WATT POWER: The Pyle 5 Channel Power Amplifier Mixer is perfect for your PA and commercial entertainment system. It gives you 600W peak power to be used for multi speakers w/ 4-16 ohms impedance allowing you to enjoy high quality audio8 INPUTS: The personal portable digital amp box supports headphone, 3.5mm jack for iPod, MP3, PC, laptop, iPhone, tape deck, tuner, AUX, CD player. It also features 4 microphone inputs XLR 1/4'' combo jack for karaoke or talkover
SPEAKER TERMINALS: The professional integrated indoor outdoor stereo receiver allows you to connect one or more 4-16 ohm speakers to the amp w/ or w/o transformers. Make sure that all connected speakers should have the same impedance rating
USEFUL INDICATORS: The sound amplifying device features protection indicator where LED is illuminated when a thermal overload is present, and a clip circuit indicator which protects the amplifier system from being damaged by overdriving power levels
BYPASS / EQ SWITCH: The compact and rack mount amplifier features a bypass and EQ switch. Set the switch to EQ position to connect an equalizer, and set to bypass position to remove the effect of the equalizer on your system's sound
5 Channel Mixer - Front 3.5mm AUX CD Input Jack - MIC 1 Talkover - Ground Screw
4 Mic Inputs XLR & 1/4'' Combo Jack - 4 ohm, 8 ohm, 16 ohm & 70V Screw Terminals - Headphone Output - 2U Rack Mountable
2 Line Inputs RCA - 8 ohm 1/4'' and Binding Post Outputs - Rotary Channel & Master Level Controls - 110/220 Voltage Selector
CH4 Mic/Line Switchable - Illuminated VU Output Level Meter - Thermal Overload Protection w/ Indicator - Dimensions: 4 3/16''H x 19.0''W x 12''D
Effects Loop RCA In/Out - Feedback Filter with Rotary Control - Clip LED Indicator - Weight: 22.3 lbs
Description
PyleHome Model : PT61019'' Rack Mount Power Amplifier/Mixer
19'' Rack Mount 600 Watt Power Amplifier/Mixer w/ 70V Output & Mic Talkover
This rack-mountable, 5-channel power amplifier has power - 600 watts! On the back, it's equipped with 4 mic inputs, each of which can take balanced XLR or ' jack inputs - and a rotary-controlled filter prevents excessive feedback. It also has 2 RCA line inputs - so you can connect another source like a CD or MP3 player. This amp is also compatible with speakers of various impedance - it has screw terminals for 4, 8, and 16 ohm speakers, as well as an 8 ohm binding post output. The in/out effects loop allows you to process your signal using an external device. On the front, an illuminated VU meter provides signal levels. A headphone jack lets you hear your mix in private. The PT610 has thermal overload protection with indicator, so you know your sound is secure. Runs on 110 and 220 V.
10. Littlite 6XR-4 6" Right Angle 4-Pin XLR Gooseneck Lamp
Feature
Flexible GooseneckBright, Long-Lasting Bulb
4 Pin Right Angle XLR Mount Lamp
Stylish black with black highlights and a low profile hood