The 10 best podcasting microphones for mixer 2019
Finding the best podcasting microphones for mixer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best podcasting microphones for mixer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best podcasting microphones for mixer
1. Pyle Professional Audio Mixer Sound Board Console - Desk System Interface with 8 Channel, USB, Bluetooth, Digital MP3 Computer Input, 48V Phantom Power, Stereo DJ Streaming & FX16 Bit DSP-(PMXU83BT)
Feature
DJ & Studio Console Mixer System - Multi 8-Channel Audio Source Mixing - Built-in Bluetooth Wireless Receiver - FX (Analog Effects) & 16 Bit DSP processor - Direct-to-Computer Connect & Sound Record AbilityLCD Digital Display & Front Panel Control Center - Rotary Adjustment Knobs & LED Indicator Lights - MP3 Digital Audio File Compatibility - USB Interface: MP3 Flash Drive Reader/Computer Connection - Connect & Stream Audio from External Devices
(2) 1/4'' (L/R) MAIN Outputs - (4) XLR/14'' Combo Audio LINE/Microphone Inputs - (2) Pair RCA (L/R) Inputs - (2) Pair 1/4'' Mono + Stereo Inputs - 1/4'' Send + Return Inputs - 1/4'' Headphone Jack - Stereo Level Fader/Slider
Output Signal Level Indication - BUS Audio Control, Sound Routing - PAD Channel Source Input Switch - Independent Channel Input Audio Configuration - Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment - +48V Phantom Power Control
Power ON/OFF Switch - Used for Professional Studio Applications & On-Stage Performances What's in the Box: - Bluetooth Studio Mixer - Power Adapter Cable, 4-Pin Wireless Bluetooth Connectivity
Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm
Description
Pyle 8-Ch. Studio DJ Mixer [Audio Interface Mixing Sound System] Bluetooth Wireless Streaming | USB/Computer Connection Interface | Digital MP3 Support | +48V Phantom Power (PMXU83BT)2. Neewer NW-700 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit
Feature
The Set Includes: (1) Condenser Microphone, (1)Adjustable Suspension Scissor Arm Stand, (1)Table Mounting Clamp, (1)Metal Shock Mount, (1)Pop Filter, (1)Ball-type Anti-wind Foam Cap, (1)3.5mm Male to XLR Female Cable. NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally; If you want better sound effect, a sound card should be used; Please use a extra 48V phantom power adapter to connect it (phantom power adapter is not included)The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source.
The adjustable scissor arm stand is made out of all steel construction, sturdy and durable. Folding type, convenient to carry. Can be mounted on the announcers' table. The double-braced arms add strength. Your microphone is held safely on this scissor arm microphone clip.
The microphone wind screen pop filter mask shield can ensure that your tracks are audible and easy to understand.And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds.
The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.
Description
*PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.*
NOTE:
1.The Condenser Microphone only works with the device that could provide enough power (Voltage Required:5V) for it.
When connected with desktop computer, the Microphone could be used alone;
When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.
2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included).
3.The microphone can not be used with mobile phone and tablet computer. *NOTE: It cannot work with Mac.
4.If you want better sound effect, a sound card should be used.
5.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.
(1)NW-700 Condenser Microphone
Has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal.
Low noise, wide dynamic range, high sensitivity output.
Material: Metal
(1)NW-35 Scissor Arm Stand
*Max load: Approx 35oz/1KG*
Double-braced arms equipped with super-strong spring. Adjustable angle & height to show your perfect voice.
Material: Steel
Extend up to 31.5"/80cm.
(1)Pop Filter
(1)Metal Shock Mount
(1)Ball-type Foam Cap
(1)Table Mounting Clamp
(1)3.5mm Male to XLR Female Cable:
Length: 8.2ft/2.5m
3. Samson Q2U Dynamic USB Microphone Podcasting Pack and Accessory Bundle with Boom Arm + Headphones + Pop Filter + Fibertique Cloth
Feature
Cardioid polar pattern is effective in minimizing noise and off-axis audio that can cause feedback.Frequency response of 44.1 / 48 kHz, 16-bit resolution. Low-latency headphone monitoring w/ a level control.
XLR and USB outputs to record to Mac or Windows based computer while at the same time connect to a mixer, preamplifier, or PA system.
On/Off switch controls both USB and XLR audio outputs. Microphone is plug and play requiring no driver installation.
Practical & necessary accessories like a mic boom arm that offers 28" of arms reach, a pop filter that softens explosive sounds, & more in the bundle.
Description
Designed for accuracy, flexibility, and durability, the Samson Q2U Dynamic Microphone provides a high level of audio performance in every environment. Whether used in the studio, for public address or performances, the Q2U captures natural, detailed sound and with its cardioid polar pattern is effective in minimizing noise and off-axis audio that can cause feedback. An extended range frequency response of 44.1 / 48 kHz, 16-bit resolution ensures optimum reproduction with super clear sound and with XLR and USB outputs you can easily record to any Mac or Windows based computer while at the same time connect to an analog mixer, preamplifier, or PA system. The microphone has an On/Off switch which controls both USB and XLR audio output providing flexibility and control and is completely plug and play requiring no driver installation. With the Q2U you can capture interviews at press conferences, live events or on the street thanks to its rugged solid die-cast body with heavy-gauge mesh grille that can withstand it all. Included in this package is a desktop tripod stand and extension piece for convenient placement in front of the computer, a mic clip to use with the desktop stand, a windscreen to minimize wind noise, and a USB and XLR cable make the package complete with everything you need to get started on your next project.
Accessory Bundle:
Mic Boom Arm Offers 28 of vertical/horizontal arm reach for flexible mic placement in radio, podcast, or home studio setup.
Stereo Headphones Over-ear, Closed-back design, Padded adjustable headband, Offers high-quality sound.
Mic Pop Filter - Designed for vocal filtration effectively softens explosive 'p' and 'b' consonants from your voice and controls unwanted breath noise.
Fibertique Cleaning Cloth
4. 2 Person Podcasting Podcast Kit Soundcraft Mixer+Headphones+Mic+Stand+Pop Filter
Feature
Package Includes : Soundcraft Notepad-8FX 8-Channel Podcast Mixer Podcasting Interface, USB and Effects + (2) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables+ XLR Cable and Mic Clip + (2) Rockville PRO-M50 Studio Headphones with Detachable Coil Cable, Case, and Extra Ear Pads + (2) Rockville RTMS21 Desktop Tripod Dynamic Microphone Stand With Pop Filter and Shock MountSoundcraft Notepad-8FX 8-Channel Podcast Mixer Podcasting Interface, USB+Effects. Get legendary Soundcraft quality from professional microphone preamps. Easily record, edit and playback from your Mac and PC with an integrated USB audio interface-simply plug-and-play with your Mac*.
Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound! Mic Features: M-56 Cartridge. Full metal mic body. Type: dynamic . Neodymium magnet. Polar Pattern: uni-directional. Frequency Response: 80 - 13Khz. Impedance: 600 Ohms 30%. Sensitivity: -72 3dB. Case Features: High quality plastic carry case protects the mic during transportation. Comfortably holds microphone and mic cable .
Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Professional High-Definition Studio Headphones. 40mm Neodymium drivers. Ergonomically designed swivel ear cups. Supreme sound isolation. Accurate sound reproduction. Minimal bleed. Sturdy and durable steel headband and arms. Soft leather headband cover. Interchangeable leather and soft suede ear cups covers included. Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended).
Rockville RTMS21 Desktop Tripod Dynamic Microphone Stand With Pop Filter and Shock Mount. Shock mount has adjustable angle. You can adjust the mic inside the shock mount up and down. Compatible with microphones with diameters of 36MM and under (1.42 inches). Light-weight . Extremely durable and strong. Tripod features rubber feet. The Pop Filter is made of high quality double nylon net filtering. There is a space between the 2 filters for best pop filtering.
Description
Features of Notepad-8FX: Sweeten your mix with HARMAN digital signal processing including iconic Lexicon reverb, echo and delay. Getting a great mix is easy with a familiar channel strip layout that includes EQ, aux send, master fader level and rotary headphone volume control. Durable metal enclosure that's built-to-last.Features of RCM03: Cable Features: XLR to " Cable. XLR to XLR Cable . 10 Feet each. 100% OFC oxygen free copper . Cable delivers crystal clear distortion free signal. Cable is 5 MM thick with cover (22 AWG standard mic cable). XLR cable connectors are very solid and durable. Mic clip Features: Heavy Duty Standard Size Microphone Clip. Stand Mountable. Solid Plastic Construction with copper inside (part that screws to the mic). Black Color.
Features of PRO-M50: Gold plated 3.5mm connector. Gold plated " adapter. Hard leather carrying case. Stainless steel headband frame and moving arms are durable and long-lasting. Specifications: Style: Closed-Back. Design: Circumaural. Transducer Type: Dynamic. Driver: 40MM . Sensitivity: 973dB. Impedance: 32ohm. Frequency Response:10Hz - 25KHz. Max. Power: 600MW. Rating Power: 260MW. Net Weight:290g (with cable).
Features ofRTMS21:The pop filter immediately improves the sound of your vocals for recording, podcasting, or broadcasting. Detachable designed for convenient storage and easy transport.
5. Maker Hart Just Mixer M - Mini Microphone Mixer with Preamp for Phantom Power, USB Audio Input and Output (Basic Package, Black)
Feature
MIC PREAMP - Phantom power (+48v) and plug-in power (1.5v) is provided by onboard microphone preamplifiers for compatibility with condenser microphones, lapel mics, lavaliers and other mini mics, as well as unpowered dynamic microphones.USB AUDIO INTERFACE - Stream 24-bit / 96kHz digital audio over USB to or from the mixer by connecting to computers and mobile devices.
TINY MIXER - Fitting easily in your hand, this is the world's smallest mixer to include 2 preamped mic inputs.
BIG FEATURES - Inputs for mics, Line, USB audio and AUX; Outputs for powered speakers/recording, headphones and USB audio; Master and Channel volume faders; Channel mutes, Line-in gain control, mic echo effect-this mini mixer has it all! It is also ideal for combining different sound inputs for webcasting on Facebook, YouTube, and other live streaming platforms.
PORTABLE - At this size, it's easy to take anywhere, and it can be powered by a USB power bank, making it perfect for mobile video, live recording, interviews and more.
Description
Tiny yet packed with featuresConnect microphones, computers, tablets, phones, instruments*, DJ equipment-this mixer can handle it all! Designed by professional sound equipment makers to fulfill a need that has yet to be met, the JUST MIXER M by Maker Hart fits many key features into a package no bigger than the average smartphone. * Electric guitars and basses will require a separate DI box.
Connect any microphone
Just Mixer M has preamps for condenser and electret microphones with plug-in-power, and also handles dynamic microphones with ease. Connect up to 2 microphones and set the preamp to the right setting-OFF for dynamic mics, 1.5v for electret microphones (lapel and mini-mics), or 48v for condenser mics-and you are ready to record podcasts, live music or whatever your imagination comes up with.
24-bit / 96kHz USB Audio IN and OUT
Hi-res 24-bit / 96kHz onboard DAC allows 2-way USB audio streaming. This means you can use the Just Mixer M as an external sound card, connect it to your phone or tablet via USB OTG*, use it as an audio interface or high resolution DAC.
Notes
- Included combo cable (TRS to TRRS) is for recording with devices with combo jacks such as phones and tablets; it will not work as an AUX cable.
- MUTE controls + Master volume do not affect headphone jack.
- To use USB audio in/out, be sure the USB/LINE button is depressed and glowing red.
- MIC inputs are mono.
Specifications
Gain: 50 dBm (MIC1/MIC2/LINE); 20 dBm (AUX)
Jack size: 1/8" / 3.5 mm
Dimensions: 5" x 3.3" x 0.9" / 126 x 85 x 23 mm
Weight: 4.2 oz / 120g (mixer only)
Current consumption (max): 650mA
Power supply: micro USB (5V)
Package Contents: Just Mixer M, 1/8" / 3.5 mm TRS to TRRS cable (male-to-male), micro USB charging cable, USB adapter, manual
6. Marantz Pro MPM1000 - Studio Recording Condenser Microphone with Shockmount, Desktop Stand and Cable Perfect for Podcasting and Voiceover Projects
Feature
Entry-level price for recording studio-quality soundIdeal for video commentary and Podcasting projects, or isolating instruments on a crowded stage
Cardioid pattern picks up what's in front without catching echoes, background noise, or other sounds nearby
Large diaphragm condenser microphone with 20 to 20,000 Hz-wide frequency response
Description
If you know what youre doing, you want to sound like it, too.
Marantz Professionals MPM-1000 Studio Series microphone is a high-quality condenser mic that delivers studio-grade audio performance along with unexcelled value.
The MPM-1000 Studio Series microphone exemplifies Marantz Professionals commitment to users who demand no-compromise components that fit within their budget.
Frequently Asked Questions
Do I need to use phantom power or a power supply?
The MPM-1000 is a standard condenser microphone and will require 48vDC power, either supplied by phantom power through the interface or mixer, or through an external phantom power supply. Check the specifications for your mixer or audio interface to find out if it can provide phantom power on it's own, or if you will need to supply this through an external adapter.
Here is a simple procedure for connecting the microphone:
- Make sure that the gain or volume on your pre-amp, speakers and headphones are all turned down.
- Use an XLR cable and attach the female end securely to the MPM-2000. Connect the male end to your microphone pre-amp or phantom power supply.
- Once the MPM-1000 is fully connected to the pre-amp, turn on the phantom power.
While disconnecting, always be sure to turn down your pre-amp, speakers, and headphones before turning off phantom power. Wait approximately 30 seconds after turning off phantom power to disconnect the MPM-1000. This can help avoid damage to your equipment.
How do I mount the microphone and shock mount?
The MPM-1000 comes with a shock mount for mounting to your microphone stand. It's always recommended to mount the included shock mount first before attaching the microphone to prevent any accidental damage to the mic. Here is a simple procedure to follow:
- Loosen the screw on the shock mount's mounting piece and move the mounting piece up so that it is free to attach to the microphone stand
- Hold the shock mount firmly in one hand and bring the mounting piece up to meet the threaded end of the arm on your microphone stand
- Instead of spinning the shock mount, continue to hold it in one hand whileusing the other hand to spin the arm of the microphone stand, screwing it into the shock mount's mounting piece.
- Once the shock mount is secured firmly to the microphone stand, position the shock mount for recording and tighten the screw on the shock mount so that it stays firmly in place
- Squeeze the wire clasp on the shock mount to pull the ring apart, slide the microphone inside and release the clamp to tighten the grip around the mic.
Important:Always, make sure that the screws on the microphone, shock mount and stand are loosened before making any adjustments to their angle. Forcing any joint without properly loosening it's screw can damage and strip the joint, affecting it's ability to remain secure. The joints should also never be made too tight and should never require more pressure than can be provided by one hand. Again, this can damage the joint and affect it's ability to remain secure in the future.
The included mount won't fit on my microphone stand. Is it compatible?
The MPM-1000 comes with a thread adapter that may come left inside the shock mount and can be easy to overlook. This can be used to adapt the microphone to fit on microphone stands with different threading. Most often this is associated with a difference in microphone stands between the US (5/8" threading, without the adapter) and Europe (3/8" threading, with the adapter).
The piece should be easy to screw in and out using a flat head screwdriver, or even just a guitar pick.
Which side is the front?
The MPM-1000 is a side-address microphone, meaning the capsule is parallel to its body. The microphone will accept sound from sources perpendicular to the microphone body, as opposed to a front-address microphone, like theShure SM58, that accepts sound from its top or end.
When positioning the MPM-1000, the front will be the side marked by the Marantz logo. Point this side towards your source for the best results.
Do I need to use the included cable?
No, you are free to use a different cable as long as it is a microphone cable. This mic requires phantom power which can only be provided by a standard microphone cable, otherwise known as an XLR cable.
Further Technical Support
Whether you are a customer or dealer, if you already own a Marantz Professional product, or if you just have pre-sales questions, the Marantz Professional technical support team is available to help!
Visit the link below to connect with any of the following support options: phone support, email support.
- marantzpro.com/support
Technical Specifications
- Element: Pure-aluminum-plated, 18mm-diameter-diaphragm condenser capsule
- Polar Pattern: Cardioid
- Frequency Response: 20Hz20,000Hz
- Open Circuit Sensitivity: -38 dB 2dB (0 dB = 1 V/Pa @ 1 kHz)
- Impedance
- Output: 200 30% (@ 1 kHz)
- Load: >100
- Self-Noise: 17 dBA
- Maximum SPL: 136dB (THD ~ 1%, 1 kHz)
- Signal-to-Noise Ratio: 77dB
- Phantom Power Requirements: 9-48 VDC, 3 mA typical
- Dimensions(length x diameter): 6.5 x 1.90
- Weight: 10.5 oz
Box Contents
- MPM-1000
- Shock mount
- Windscreen
- Tri-pod stand
- XLR cable
- User Guide
- Safety & Warranty Manual
7. Professional BM-800 | Cardioid Condenser Microphone Set with 6 Basic Accessories and A Mixer Sound CardLuxury Kit (BM 800 black)
Feature
Portable Digital Mixer DJ Mobile Sound Card Instant Online Celebrities Recording Singing Live Broadcast with5 kinds of change sounds,12 kinds of electronic tone selection for LiveStream YouTube LiveMe Facebook Live periscope anchor for iPhone/Android Smartphone/PC.Desktop Microphone Suspension Boom Scissor Arm Stand with microphone clip, constructed with premium quality metals, folding type, convenient to carry. Suitable for any stores, families, stages, studios, broadcasting, desk, table, TV stations, restaurants, battle station, etc.
Professional Microphone Pop Filter Mask Shield, dual layered wind Pop screen with a flexible 360 gooseneck clip Stabilizing arm ,can secure variety tubular mounting booms or microphone stands,and Swivel mount for easy installation, removal and location adjustment
48V Phantom Power Supply Powered by USB plug in,with universal XLR input and output, compatible with all kinds of microphone music recording equipment,Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer.
Description
FELYBY- FALLING IN LOVE WITH YOUR VOICE
FELYBY is a leading manufacture of professional audio products for music recording, broadcast markets. FELYBY Microphones offer variety of condenser microphone solutions for Studio, USB, Podcast. We have our principle as Clients' needs come first.
We stand for high-performance microphones designed to deliver clear, high-quality sound for memorable recordings. We understand the importance of good quality stands; therefore, we have paid particular attention to the finest details, ensuring all materials used are of REACH standard and do not compromise the durability or quality of the product.
FEATURES AT GLANCE
Cardioid-only, large-diaphragm tube condenser mic
Low-noise operation meets high-headroom SPL handling
Delivers warm, clear bass, detailed midrange, and a silky high end
Perfect for vocals, musical instruments, podcasting, voiceovers, interviews, field recordings
Frequency range: 20 to 20,000 Hz
Sensitivity: -34 dB2 dB (0 dB=1V/Pa at 1kHz)
Max. SPL: 132 dB (at 1kHz1% T.H.D)
Equivalent noise level: 16 dB-A
Signal/noise ratio: 78 dB
Impedance: <=200 ohms
Recommended load impedance: >= 1000 ohms
Connector: 3-pin XLR to IEC
Cable Length: 8.2 ft/2.5M
Dimensions: 50 x 160 mm (Dia. 1.9 x 6.3 in.)
Net Weight: 400g
Package Included:
1 x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)
1 x Microphone Suspension Scissor Arm Stand
1 x Foam Protective Anti-wind Cap Cover
1 x Podcasting Condenser Microphone
1 x 48-Volt Phantom Power Supply
1 x Table Mounting Clamp
1 x Upgrade Sound Card
1 x Microphone Pop Filter
1 x Metal Shock Mount
1 x USB Cable
2 x Manual
8. Podcast Podcasting Bundle w/Peavey Mixer+(4) Mics+(4) Samson Headphones+Booms
Feature
Package: Peavey PV 10BT PV10BT Pro Audio Mixer With 4 Mic In, Bluetooth, USB, Compressor/Effects and 3 Band EQ + SAMSON QH4 4-Channel Studio Monitoring Headphone Amplifier + (4) Samson SR850 Professional Semi-Open Studio Monitoring Headphones + (4) Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand with Desk Clamp + (4) Rockville RCM03 Pro Studio Recording Condenser Microphone MicPeavey PV 10BT PV10BT Pro Audio Mixer,4 mic In,Bluetooth/USB,Compressor/Effects. 4 combination XLR/1/4" low noise mic preamps. Rugged console design. EQ bypass per channel. 2 channels of built-in compression. Individual channel mutes. LED clip and signal present indication. On-board USB-A MP3 playback. 4 channels of Peavey's exclusive MidMorph. 4 Channels of direct out. 3-band EQ on all channels. KOSMOS bass and treble enhancement
SAMSON QH4 4-Channel Stereo DJ Studio Monitoring Headphone Amplifier Amp. 4-channel stereo headphone distribution amplifier. Four independent 1/4" stereo headphone channels. Individual volume control on each headphone channel. Two balanced 1/4" input connectors. Stereo 1/8" Aux input and output. Master Mute and Mono-summing switches
Samson SR850 Professional Semi-open Studio Reference Monitoring Headphones. Ideal for professional recording and hi-fi monitoring. Transparent response with airy highs and pronounced depth. Over-ear, semi-open-back design with velour cushioning. Large 50mm drivers with rare earth magnets. Adjustable headband. 10Hz-30kHz frequency response. 32 Ohm impedance. 1/4" adapter included
Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm. Articulating microphone boom arm. Suitable for studios, broadcasting, podcasting, and more. Arms: 20"+20" arm length for adjustment. C-shape desk clamp is made of aluminum alloy. Fits any desk less than 2 inch thick. Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design
Description
Features of PV 10BT: Channel 9/10 stereo return/input. Dual selectable control room outputs. Individual Listen/Solo function. Precision 60 mm faders on master. Stereo USB-B streaming audio in and out. One pre-fader AUX send. High quality master LED meter bridge. On-board studio quality digital effects with individual channel control Effects and playback LCD display. Master mic mute. Stereo pan control per channel. Studio quality headphone output. Stereo 1/4", RCA or 3.5mm input channel. Peavey's exclusive on-board Hi Z guitar input. Main stereo outputs with 1/4" unbalanced and balanced XLR connectors. New slim, low-profile design. Global 48V phantom power. Convenient tablet cradle. Bluetooth wireless connectivity. Weight Packed: 9.48 lb(4.3 kg). Width Packed: 16.14"(40.9956 cm). Height Packed: 16.54"(42.0116 cm). Depth Packed: 3.54"(8.9916 cm)
Features of DMS40: ABS plastic mic clip. You can set the base stand in the desk firmly and adjust to your favorite position. High quality steel frame is sturdy and durable. Internal springs for silent and effortless positioning
Features of RCM03: Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer). Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 20030%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Response: 30Hz - 20 KHz. Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz. Load impedance: Greater or = to 1000 Ohms. Equivalent Noise level: Less than 18dB A (IEC581-5). Max. Input SPL: 126dB(THD1.0% at 1kHZ).
9. Wireless Microphone,FIFINE USB Microphone,UHF Handheld Dynamic Microphone with USB Receiver Output to Mac or PC For Singing,Podcasting and Recording Purposes.(K026)
Feature
Wireless Microphone System Connected to Laptop for Direct Recording-Records audio into your Mac & PC Computer.Wireless receiver built-into USB Stick is the best choice for court reporters, musicians, students, business people, voice recognition purposes, Skype communication, VOIP and Podcasting,get high quality audio into computer!**Not work with speaker system,mixer even know it has a USB input.**USB Handheld Microphone-Computer-compatible wireless mics with steel mesh grill and ABS plastic material body with a convenient power control switch,offer style and durability.The microphone feature a LED display to give you an easy-to-read visual component that makes working with PC all the more easier.The USB receiver has blue recording indicator so that you know you are recording audio.
Plug-and-play USB Microphone Operation -With no driver installation required,it is set to deliver a hassle-free experience of ease-of-use,functioning flawlessly with any recording software you prefer.USB receiver can be only powered and recognized by PC,not workable directly connected to Active Loudspeaker and Mixer. Plug the speaker into the 3.5mm jack of the receiver to output your sound if you need.
Dynamic Microphone Wireless System-Cardioid directionality with high feedback resistance.Precise reproduction of speech and vocals with excellent intelligibility. Comfortable and easy to hold microphone,provides freedom of movement for video production, computer applications and business presentations
Wireless Microphones Give You mobility and Freedom of Movement-Enjoy hassle-free audio transmission with the Wireless Microphone & USB Powered receiver System.The wireless system offers 20 selectable UHF frequencies features for clear sound and intuitive operation with 40-65 feet wireless operating range.
Description
FEATURES1. Operates on UHF(Ultra High Frequency) to secure powerful transmission of signal and good connection.
2. Convenient use. Has LCD screen on microphone to display battery level and frequency.
3. Custom-tuned capsule is sensitive and high-quality, which can greatly eliminate noise and capture clear sound.
4. Delivers natural and rich sound, and shows out all pitch of treble, alto and bass.
5. Fashionable design for perfect handheld use, metal construction.
6. Zero latency. Ideal for record, speech, lecture, karaoke and more.
SPECIFICATIONS
Microphone
Type: Dynamic
Model Number: K034
Standard Impedance: 60030
Sensitivity: -50.501db (at 1KHz)
Frequency Response: 50Hz-16KHz
Pick-up Pattern: Uni-direction
Range of Operating Temperature: -60-70
Construction: Suspension Type
Receiver
Frequency: 672.5-684.5MHz
Sensitivity: -95db
S/N Ratio: More than 58dB
Frequency Response: 40Hz-15kHz
10. Neewer Stereo Mixer 5 Channel Compact Mini Mixing Console Echo DSP Effects, LCD Display Screen, Built-in SD card/USB/48V Phantom Power Functions for Sound Recording, Music Editing (NW-05)
Feature
WIDELY USAGE: Perfect for audio recording, editing, podcasting software DJ stage karaoke music appreciation. Compact structure and durable plastic housing can be used in different locations for your convenience. Note: The microphone, speaker and wire are not includedPREMIUM SOUND QUALITY: The stereo mixer ensures premium ultra-low noise. Compression function of each mic channel to keep crystal clear sound during performance
DSP EFFECTS: Built-in echo DSP with adjustable delay for wonderful effect, which is specifically designed for intensive processing of high-quality audio
ULTRA LIGHTWEIGHT AND COMPACT DESIGN: Compact structure and durable plastic housing can be used in different locations for your convenience
USB SD CARD MP3 PLAYING RECORDING FUNCTION: Insert SD card /USB/MP3 function for playing and recording. Press the button to select MP3 and match the MP3, then play music. Select recording mode and input signal from mic or line, then press play button to record
Description
The stereo mixer is suitable for the applications in PA system or indoor recording, such as movie TV music recording in theatre, dancing hall, bar, conference hall, etc.
The stereo mixer ensures premium ultra-low noise. Compression function of each mic channel to keep crystal clear sound during performance.
Built-in echo DSP with adjustable delay for wonderful effect, which is specifically designed for intensive processing of high-quality audio.
Built-in 48V phantom power supply for condenser microphone.
Insert USB interface to connect with PC and SD card to play music directly and also for playback and recording
Press the button to select MP3 and match the MP3, then play music.
Select recording mode and input signal from mic or line, then press play button to record.
Compact structure and durable plastic housing can be used in different locations for your convenience.
Specification:
Input Voltage: 110V
Power Supply: DC 12V Input
Dimension: 10.8 X 7.6 X 3 inches/ 27.4 X 19.3 X 7.8 centimeters
Net weight: 4.85 pounds/ 2.2 kilograms
Package Contents:
1 x NW-05 Stereo Mixer
1 x DC 12V Power Adapter