The 10 best pedal switch 2019
Finding the best pedal switch suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best pedal switch suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best pedal switch
1. Linemaster T-91-SC3A Treadlite II Foot Switch, Electrical, Single Pedal, Momentary, SPDT Wired N.O., No Guard, Black, 8 ft. Cord with 3 prong plug
Feature
15 amp, 125V, 1/2 HP foot switch for use with low-power, light-duty electrical devicesSteel-formed housing with electro-coated finish for durability and resistance to corrosion
Non-skid foot pad and base for stability and safety with two bolt holes for mounting to floor or equipment
Momentary action device with low profile and light actuation force to reduce operator fatigue
8' cord has a 14 gauge, 3 conductor (14/3) type plug
Description
This Linemaster T-91-SC3A Treadlite II 15 amp 125V, 1/2 HP foot switch has steel-formed housing, non-skid pads, and cord with plug and is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination. It has a steel-formed housing with an electro-coated finish for durability and protection from corrosion. The non-skid foot pad and base give the foot switch stability to help prevent sliding on smooth floors, and it and has bolt holes for mounting to the floor or equipment. The low profile and light pressure required to operate reduces operator fatigue. An adjustable strain relief clamp protects the cord (included) from damage caused by pulling or stretching. This foot switch meets Canadian and United States Underwriters Laboratories (UL) standards for quality assurance and meets European Conformity (CE) product compliance safety standards. It has an Ingress Protection (IP) rating of 20 for protection against small amounts of dripping water and access with a finger, and it is compliant with the Restriction of Hazardous Substances (RoHS) directive. A heavy gauge steel guard and other accessories are available for this product (contact manufacturer). This momentary operation foot switch is suitable for low-power, light-duty applications such as dental or medical, office, and power tools, among others.
Specifications
| Output | 15 amp, 125V |
| HP | 1/2 |
| Mounting | 2 bolt holes |
| Cord | 8' (14/3) |
| Plug | 3-prong |
| Circuitry | SPDT, NO, Form A contact |
| Unit weight | 1.25 lb. |
| Dimensions | 1 x 2.63 x 3.5" (H x W x D) |
| Safety | CE, RoHS |
| Quality | UL |
| Degree of protection | IP20 |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Foot switches are used to turn on and off electrical devices and may also provide control over the device's speed and mode of operation. They come with up to three pedals and can have a maintained, momentary, variable, or anti-trip switch action. For maintained action switches, one press of the pedal controls the power, whereas momentary action switches require constant pressure on the pedal for power. Variable action switches (also called foot potentiometers) function similarly to momentary action switches, but also provide control over the connected device's operating speed. Anti-trip action switches require users to release a safety latch before pressing down for momentary action. Foot switches vary in their contact specifications, amp ratings, plugs and receptacles, and material construction to suit different applications, device amperages, plug configurations, and environments. Foot switches are commonly used with power tools, sewing machines, musical instruments, dental equipment, and lighting, and in the construction, laboratory, production, and medical fields, among others.
Linemaster Switch Company manufactures electromechanical, pneumatic, digital, linear Hall effect, and wireless foot switches for use in the industrial, medical, computer, and musical fields, among others. The company, founded in1952, is headquartered in Woodstock, Connecticut, and meets International Organization for Standardization (ISO) 2001:2008 and ISO 13485:2003 standards.
2. E Support 3PDT 9 Pins Box Stomp Guitar Effect Pedal Foot Switch True Bypass Metal Pack of 5
Feature
For rewiring vintage padals or effect boxesFor ,Electro-Harmonix, T Rex,Retro FX,Radial Bigshot,ect effects pedals
The third pole can be wired to control an LED status light or other custom function.
There are a total of nine lugs on each switch,three per pole.
For unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain.
Description
1.The item can be used to rewire vintage pedals or effects boxes 2.For unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain. 3.The third pole can be wired to control an LED status light or other custom function. 4.There are a total of 9 lugs on each switch, three per pole. 5.AT least 7/8" depth and 1/2"-diameter mounting hole are required. the threaded portion is 7/16" tall. 6.Total length:4.3cm Package Include: 5 X 3PDT 9-Pin foot switch3. MLCS 9080 Billy Pedal Foot Switch, Deadman Style
Feature
Hands-free router control means both hands on your work for safety and controlNo need to free a hand to hunt for your router switch
5 star performance and price
Greatly enhances router safety
MLCS quality guaranteed
Description
Operate your router and other tools with hands-free convenience. The Billy Pedal is a spring loaded safety switch that turns off the tool when you lift your foot from the pedal. Simply plug our foot switch into your electrical outlet, then plug your tool into the Billy Pedal. 15 Amp. Includes 8 foot cord.Hands-free router control means both hands on your work for safety and controlNo need to free a hand to hunt for your router switch5 star performance and priceGreatly enhances router safetyMLCS quality guaranteed4. Power Maintained Latching Foot Switch
Feature
Easy to operateMaintained, two-step design: press once to turn on, press again to turn off
Hand or foot use
Effortless installation: plug the foot switch into a grounded outlet, then plug the machine into the foot switch
Includes 7 ft. 5" power cord: 120V, 15 amps
Description
This easy-to-operate foot switch allows you to operate table routers, scroll saws, drill presses, lathes and rotary tools hands-free! Installation is easy-simply plug the foot switch into a grounded outlet, then plug the machine into the foot switch and you're ready to go. A two-step design allows you to press once to turn the switch on and again to turn the switch off.5. TEMCo Heavy Duty Foot Switch CN0003 - Cast Aluminum Foot Switch 15A SPDT Electric Pedal Momentary 5 YEAR WARRANTY
Feature
SPDT (Single pole, doublethrow)Rated amps: 15A / Rated voltage: 250VAC
Cast Aluminum construction
Dimensions: 7.91 x 4.00 x 2.95 in (201 x 101.5 x 75 mm)
5 Year Warranty
Description
This extra heavythickness cast aluminum foot switch includes a rotary locking cord strain relief. Non-slip base pads prevent foot switch from sliding on smooth surfaces. Cast chassis includes reinforcing ribsto further strengthen structure. Internals employ heavy duty gasketto prevent water, oil, or dust intrusion. Internal contact set employs single pole doublethrow (SPDT) switch assembly rated at 15A, 250VAC.6. JIUWU Electric Guitar 3PDT Effects Stomp Foot Pedal Switch True Bypass with Solder Terminals Pack of 2
Feature
The item can be used to rewire vintage pedals or effects boxesThe third pole can be wired to control an LED status light or other custom function.
It's also a very tough switch that will last a very long time
Description
The item can be used to rewire vintage pedals or effects boxesFor unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument
or other components in the signal chain.
The third pole can be wired to control an LED status light or other custom function.
The triple pole switch allows you to wire in an on/off indicator led, if desired, while the Dpdt does not.
It's also a very tough switch that will last a very long time
There are a total of 9 lugs on each switch, three per pole.
AT least 7/8" depth and 1/2"-diameter mounting hole are required. the threaded portion is 7/16" tall.
Total length:4.3cm
Package Included: 2x Effects Pedal Switches
7. Linemaster T-91-SC3 Treadlite II Foot Switch, Electrical, Single Pedal, Momentary, SPDT Wired N.O., No Guard, Black, 6 ft. Cord with 3 prong plug
Feature
10 amp, 125V, 1/2 HP foot switch for use with light-duty electrical devicesSteel-formed housing with electro-coated paint finish for durability and protection from corrosion
Non-skid foot pad and base for stability and safety with two bolt holes for mounting to floor or equipment
Momentary action device with low profile and light actuation force to reduce operator fatigue
6' cord has a 18 gauge, 3 conductor (18/3) plug type with ground and a 1250W capacity
Description
This Linemaster T-91-SC3 Treadlite II foot10 amp 125Vswitch has a steel housing, light actuation force, and a 6' power cord. This foot switch is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination. It has a steel-formed body with an electro-coated paint finish for durability and protection from corrosion. The non-skid foot pad and base give the foot switch stability to help prevent sliding on smooth floors, and the base has bolt holes for mounting to the floor or equipment. An integral, adjustable strain relief clamp protects the cord (plug and cord included) from damage caused by pulling or stretching.This foot switch is certified by the Canadian Standard Association (CSA), meets United States Underwriters Laboratories (UL) standards for quality assurance, and meets European Conformity (CE) product compliance safety standards. It has an Ingress Protection (IP) rating of 20 for protection against small amounts of dripping water and access with a finger. An awareness cover, guard, and boot are available for this product (contact manufacturer). This momentary operation foot switch is suitable for low power, light-duty applications such as dental or medical, office, and power tools, among others.
Specifications
| Output | 10 amp, 125V |
| HP | 1/2 |
| Mounting | 2 bolt holes |
| Cord | 6' (14/3) |
| Plug | 3-prong, green lead grounded |
| Circuitry | SPDT, NO |
| Unit weight | 1.25 lb. |
| Dimensions | 1 x 2.63 x 3.5" (H x W x D) |
| Safety | CE |
| Quality | UL, CSA |
| Degree of protection | IP20 |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Foot switches are used to turn on and off electrical devices and may also provide control over the device's speed and mode of operation. They come with up to three pedals and can have a maintained, momentary, variable, or anti-trip switch action. For maintained action switches, one press of the pedal controls the power, whereas momentary action switches require constant pressure on the pedal for power. Variable action switches (also called foot potentiometers) function similarly to momentary action switches, but also provide control over the connected device's operating speed. Anti-trip action switches require users to release a safety latch before pressing down for momentary action. Foot switches vary in their contact specifications, amp ratings, plugs and receptacles, and material construction to suit different applications, device amperages, plug configurations, and environments. Foot switches are commonly used with power tools, sewing machines, musical instruments, dental equipment, and lighting, and in the construction, laboratory, production, and medical fields, among others.
Linemaster Switch Company manufactures electromechanical, pneumatic, digital, linear Hall effect, and wireless foot switches for use in the industrial, medical, computer, and musical fields, among others. The company, founded in1952, is headquartered in Woodstock, Connecticut, and meets International Organization for Standardization (ISO) 2001:2008 and ISO 13485:2003 standards.
8. URBEST Black AC 250V 10A SPDT NO NC Momentary Foot Pedal Switch for CNC Industrial With Anti-skid Rubber Surface
Feature
Product Name : Foot Pedal Switch; Color : Black; Action Type : MomentaryContact Type : SPDT (NO, NC);Material : Plastic; Voltage : AC 250V 10A;Size : 10 x 6 x 3.5 cm / 3.9" x 2.4" x 1.4" (L*W*T); Cable Length : 18cm
With anti-skid rubber surface.The US customers need to use a voltage converter, here is not included.
Weight : 108g;Package Content : 1 x Foot Pedal Switch
100% MONEY-BACK GUARANTEE - Full satisfaction with your product or return your money back.
Description
It free up your hands to perform other procedure while make the operation in control with your foot.
This foot switch is momentary action and can be wired to be either push-on or push-off.
Could be used in industry equipment and other fields need foot switch.
Package Content : 1 x Foot Pedal Switch
9. Accelerator Foot Pedal Electric Switch Accessories for Kids Ride On Car Motorcycle Replacement Parts Black 6-pin Socket
Feature
Accelerator Foot PedalAccessories have 6-pin socket
Product is Applied to Specific Children Riding Toys
Please Make Sure the Purchased Part Has Same Appearance as the Original One
Easy to install
Description
This is a Replacement Part for Kids Ride On Car10. DCT Foot Operated Pedal Controller On/Off Power Supply Switch 115V 15A 2 Step Control Style Woodworking Machine Control
Feature
FOOT ON/OFF SWITCH: The DCT Foot Switch enhances safety and saves time spent searching for the off switch to prevent injury in emergency situations; Much better plan than looking for that switch under your woodworking electric motor table while supporting a heavy sheet of medium-density fiberboard (MDF)HANDS-FREE SAFETY: Hands-free woodworking machine control means both hands on your work for safety and control; No need to free a hand to hunt for your off switch; Operate your tools with hands-free convenience and easily stop tool with the tap of your foot when you need to drill a new hole, change bits, or if an emergency occurs
COMPATIBLE WITH YOUR MACHINES: No variable speed control (pedal itself is not a speed control) but is compatible with variable speed equipment; Switch allows hands-free operation when using router, sander, drill press, wood lathe, scroll saw, wood carving tool, or even a meat grinder or any 115 Volt AC, 15 amp or less machine
EASY TO USE: Plug the attached 3-prong 4-foot (1.2m) long power cord into a grounded 115 Volt outlet and plug your machine or tool into the foot switch 3-prong receptacle on the front base; Push the pedal forward for power output and push the pedal forward again to shut off the power; Push to turn on and push to turn off (not billy deadman style)
TAKE IT ANYWHERE: Heavy-duty plastic construction with texturized pedal top for maximum foot grip; 4-foot (1.2m) long 3-prong power cord allows for versatile use anywhere; 2 mounting plates on base allow foot pedal to be mounted on plywood for maneuverability or on a flat surface flooring for stable use (mounting hardware screws not included); Foot pedal is 6" L x 3.5" W x 2.75" top height tapering to 1.25" inch (15.2cm x 8.9cm x 7cm/3.2cm)