The 10 best electrical wire tracer 2019
Finding the best electrical wire tracer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best electrical wire tracer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best electrical wire tracer
1. Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking
Feature
Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester.
Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers.
Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.
Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
Description
This instrument is a multifunctional handheld cable testing tool. Work perfect when RJ11 RJ45 cable is on power. It has a wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wiring engineering, and network maintenance person.General Technical Parameters
Operating temperature: 0 - 40 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Storage temperature: -10 - 50 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Altitude: less than 2000m
Anti-explosion rating: IP40
Distance of emitting signal: 300m or so
Emitter battery: 6F22 / 9V (not included).
Receiver battery: 6F22 / 9V (not included)
Specification Parameter
Product weight: 0.180 kg
Package weight: 0.270 kg
Product size: 20.00 x 4.00 x 3.00 cm / 7.87 x 1.57 x 1.18 inches
Package size: 22.50 x 12.20 x 4.70 cm / 8.86 x 4.8 x 1.85 inches
Scope of application: Education,Home appliance,Industrial,Market,Office,Supermarket
What's In The Box?
1 x FWT11 Emitter
1 x FWT11 Receiver
1 x Clip Adapter Cable
1 x RJ11 Adapter Cable
1 x User Manual
2. Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit
Feature
Tone and trace wire on non-active networks. SmartToneTM technology provides five distinct tones for exact pair identification. Battery : 9V alkalineSends a loud tone up to 16 km (10 miles) in most cables and provides five distinct cadences for isolating individual wire pairs
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs and RJ-11 easily connect to telephone jacks---no need for adapters
Attach nylon pouch (included in kit) to your belt for easy transport
Description
PRO 3000 Tone Generator with Probe KitHarris PRO3000 Tone & Probe Kit- 18 month warranty- Requires one 9 volt battery in each product to operate (not included)- "Works on virtually anycable or wire" - Cat 3/5/5e/6 etc. -Coax - De-energized Electrical Wire -Security Wire - Speaker Wire- Tones up to 10 miles on most cable- Harris' PRO3000 Tone and Probe Kit is THE professional kit you need fortracing and toning wire or cable. Use it on de-energized AC wire, telephone/twisted pair wire, allvoice and data category rated cable, all coax cable, speaker wire, security wire, virtually and cable or wire! All in a durable nylon pouch with three pockets and extra large belt loop. - PRO3000 Probe (Top Features) - Loud speaker amplifies tone trhough walls, enclosure, wood or plaster - Easy-to-use adjustable volume control dial - "Quick-twist" tip for easy replacement - FREE Spare Tip inside- PRO3000 Tone Generator (Top Features) - SmartTone technology can generate five seperate tones - External switch lets you select solid or alternating tone options, indicated with solid or flashing LEDs - Continuity testing - Line polarity confirmation - Line cord features Angled Bed-of-Nails clips and ruggedized RJ11 plug for direct access to phone and data jacks without adaptersHC26000900
3. Greenlee 701K-G Professional Tone and Probe Tracing Kit
Feature
Ease of operation and extremely reliableLarge speaker for noisy environments
Includes the 77HP-G high power tone generator and the 200EP tone probe amplifier
Comes in a rugged, woven nylon carrying case
Features an LED headlight, headset jack, short circuit beeper and external warble-select
Description
Greenlee is proud to introduce fully upgraded versions of its industry standard tone and probe tracing kits. These all new kits offer superior tracing for low-Voltage applications such as telephone, data and security alarm wiring. Essential equipment for the internal wiring technician, the Greenlee tone and probe kits provide the ability to check-Voltage on wire pairs as well as generate a tagging tone along the wire, which is then picked up by the tracing probe. Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone and probe kits promise to provide an enhanced customer experience for tracing and identifying single conductors or cables within bundles, either at midpoint or at remote ends. All of the new tone and probe kits are assembled in the USA and are CE certified. When it comes to superior tracing capability, Greenlee's new tone and probe kits are faster, safer and easier than ever before.4. Kolsol Underground Wire Locator Cable Tester F02 With Earphone for Locate Wires and Control Wires Cables Pet Fence Wires
Feature
1. Helpful-Locating & tracking buried and hidden wires and other hidden-wires.Only for Wires & Cables,Not for Sprinkler Valves!!2. Easily Locate Pet Fence Wires, Metal Wires, Metal Pipes, Electrical Wires, ect ( only for single-strand wire, or double-strand wire in parallel, not for multistrand wire!!!)
3. Locate-Determining Which Receptacles are on specific circuitstrack-Pinpointing Drill Sites before drilling
4. Wire tracer range-Up to 3 feet deep and 1000 feet in length
5. WARNING:Do not use on live circuits to avoid damaging the Tester!This device is mainly to locate non-energized Cable, or low-voltage situation less than 24V
Description
KOLSOL F02 Underground Cable Wire Locator Tracker Lan With EarphoneItem Specifics:
Brand Name: Kolsol
Model Number: F02
Place of Origin: Shenzhen.China
Tracing type: Underground, Buried wires and Other Hidden wires
Length range:up to 1000 feet
Depth range: up to 3 feet
Power: 9V Alkaline battery
Certificates: CE
Technical indexes:
Underground Wire Locator F02 Transmitter specifications:
Tone frequency:200kHz
The Max length distance:1000 feet
The Max depth distance :3 feet
The Max. working current:Less than 70mA
Tone mode:1 Tone
Max. signal voltage:15Vp-p
Signal display:Signal tone, Antenna
Voltage protection:AC 60V/DC 42V
Battery type:DC9.0VNEDA 1604/6F22) x 1pc
Dimensions (LxWxD):49 x 135 x 33mm
Underground Cable Locator F02 Receiver specifications:
Frequency:200kHz
The Max. working current:Less than 70mA
Earphone jack:1
Battery type:DC9.0VNEDA 1604/6F22) x 1pc
Dimensions (LxWxD):43 x 168 x 27mm
PACKAGE:
1 x Emitter
1 X Receiver
1 x Earphone
1 x Kit bag
1 x Instruction Manual
5. Zircon Breaker ID Pro - Commercial and Industrial Complete Circuit Breaker Finding Kit/Compatible with Outlets up to 270 Volts/Professional Accessories Included FFP
Feature
Zircon Breaker ID Pro circuit breaker finding kit includes clips, blades, and other accessories allowing easy access to most outlets, including industrial 230 and 240 voltPatented technology of this circuit finder eliminates false positives making it quick and efficient to scan, identify, and label all breakers eliminating trial-and-error work
Isolate circuits for repair or replacement, or work on specific circuits without interrupting others or accidental shutoffs
Circuit breaker identifier is built with automatic sensitivity adjustment, no knobs or dials needed
Vital for contractors and electricians alike, this portable kit and its accessories come in a protective metal case making it easy to carry from job to job
Description
The Zircon Breaker ID Pro circuit breaker finder kit is the most complete circuit finding tool kit on the market. Find circuit breakers in residential, commercial, and industrial environments. Avoid tedious trial and error procedures and accidental power shut offs to the wrong room, office, or entire building. This tool kit acts as a circuit breaker finder automatically calibrating and finding the right circuit every time! And the best thing? You can do it yourself! The kit comes packaged in a lockable metal case and includes clips and blades for easy access to most outlets, including 230 and 240 V industrial. All you need to do is connect the transmitter plugs to the outlet and use the included, dc powered receiver wand to scan the breaker panel twice. This tool is a circuit finder. Once the transmitter is connected to an electrical outlet up to 277 volts, a signal is sent down the live AC wire connecting that circuit. This signal sent by the transmitter is detected as the circuit breaker switch panel is scanned twice. The first scan identifies which breaker operates the outlet. During the first scan, the Breaker ID Pro may indicate more than one breaker as it memorizes each circuit. On the second scan, the circuit detector will identify the correct circuit breaker with a green LED light and an audio tone. The patented technology of Zircons Breaker ID eliminates false positives providing trustworthy results making it a "must have" item for every toolbox.6. Triplett Fox & Hound Live Wire Circuit Tracing Kit - Tone Generator and Probe Set|Traces Wires Up to 1,000 ft. | Built in LED Indicator |Magnetic Backing | Moisture Resistant, Durable Design - (3388)
Feature
TriplettLive Wire Tracing Kit With True Trace Technology. Trace Wires Up To 1000Ft In Length And 3 Feet Underground With Adjustable Sensitivity And Tone. Tracer Has Built-In Noise Filter And Led He
Manufacturer name - TRIPLETT
Tracer has built-in noise filter and led head
Description
TRIPLETT, live wire tracing Kit with true trace technology. Trace wires up to 1000ft in Length and 3 feet underground with adjustable sensitivity and Tone. Tracer has built-in noise filter and LED head.7. Extech CB10-Kit Handy Electrical Troubleshooting Kit with 5 Functions
Feature
Circuit Breaker Finder with outlet/GFCI testerContinuity Tester/Wire Tracer
AC Voltage Detector with Flashlight
Convenient Carrying Case
Description
Extech CB10-KIT Electrical Troubleshooting Kit; Includes: CB10 Circuit Breaker Finder, CT20 Continuity Tester/Wire Tracer and DV20 AC Voltage Detector/Flashlight
The CB10-KIT is an Electrical Troubleshooting Kit that features three tools with 5 functions. The CB10 is an AC Circuit Breaker Finder/Receptacle Tester that locates circuit breakers and tests receptacle wiring. The second tool is the CT20, a Continuity Tester/Wire Tracer that tests continuity via bright flashing LED and loud pulsating beeper. The remote probe with LED allows a single user to trace up to three cables. The third tool in this kit is the DV20; an AC Voltage Detector/Flashlight with non-contact detection of AC voltage from 100 VAC to 600 VAC via built-in bright LED flashlight with ON/OFF button built in a rugged double molded housing.
Key Features- Circuit breaker finder with outlet/GFCI tester, continuity checker/wire tracer and AC voltage detector with flashlight in one convenient kit.
- CB10 Circuit Breaker Finder:
- Quickly locate Circuit Breakers with audible and visual alert
- Variable Sensitivity adjustment to pinpoint correct circuit breaker
- LED indicators determine if outlet is correctly wired and identify six fault conditions
- Push button GFCI test
- Includes 9V battery
- CT20 Continuity Tester/Wire Tracer:
- Continuity testing via bright flashing LED and loud pulsating beeper
- Remote probe with flashing (red/green) LED allows a single user to trace up to three cables
- Clips on and hangs from the cable(s) under test without support
- Includes 9V battery
- DV20 AC Voltage Detector/Flashlight:
- Non-Contact Detection of AC Voltage from 100VAC to 600VAC
- Rugged, double molded housing
- Built-in bright LED flashlight with ON/OFF button
- Includes two AAA batteries
8. Extech TG20 Wire Tracer and Tone Generator
Feature
Identify wire pairs, check continuity & test telephone line polaritTransmitter with output cables terminated in modular RJ11 phone connector
Adjustable sensitivity control improves wire identification and eliminates false detection
Easily trace wires from source to termination
Description
Wire Tracer Kit identifies wire pairs, check continuity & test telephone line polarity. Transmitter has output cables terminated in modular RJ11 phone connector. The non-contact amplifier probe audibly identifies the selected wire or cable so that you can easily trace from source to termination. Adjustable sensitivity control improves wire identification and eliminates false detection. Comes complete with Wire Tracer Probe and Transmitter with RJ11 phone connector, a pair of alligator clips and two 9V batteries.9. Extech CT20 Remote and Local Continuity Tester
Feature
One person operation for wire and cable testingLocal continuity checking is accomplished by a bright flashing LED and loud pulsating beeper
Remote continuity with the use of the remote probe
Flashing remote probe-two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
Lightweight and pocket-sized, clips on and hangs from the cable(s) under test without falling off
Description
Extech CT20 Remote and Local Continuity Tester, Bright Flashing LED and Loud Pulsating Beeper Indicate Local Continuity, Remote Continuity with the Use of the Remote Probe
The CT20 is an electronic tool for electricians, alarm, cable installers and others who routinely need to check circuits for continuity and also identify cables and wires. It allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. It can accommodate test wire lengths up to 10,000-feet (3,000 meters), 26-gauge minimum. The CT20's Remote Continuity mode allows the user to check continuity and to identify two or more cables/wires simultaneously.
Key Features- Bright flashing LED and loud pulsating beeper indicate local continuity
- Remote continuity with the use of the remote probe
- Flashing remote probe - Two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
- Polarity verification - Drives a 20mA DC current pulse through the wires or cables under test to the bi-color remote probe
- Lightweight/Pocketsize - clips on and hangs from the cable(s) under test without falling off
- Complete with remote probe, test leads with alligator clips, 9V battery and pouch
- Power supply: 9 Volt Battery
- Beeper: 85dB beeper
- Battery life: Approx. 12 months with normal use
- Continuity confirmation: Equal to or less than 2.0 K Ohms
- Continuity drive current: Pulsed (2.0 Hz) 20 - 50mA at 10 Ohms and 2.0mA - 8.0mA at 1000 Ohms
- Fuse: 250V 0.5A fast blow
- Operating Temperature: -12 to 45C
- Storage Temperature: -20 to 80C
- Operating Humidity: 10 to 90% RH (non-condensing)
- Dimensions: 3.6" x 2.2" x 1.14"
- Weight: 260g
10. Wire Tracer & Circuit Tester with RJ-11 Plug and Alligator Clips (Tone and Probe Kit) by PTE
Feature
Identification of telephone tip and ring lines; detection of line condition: clear, busy, or ringingTONE mode to trace electrical wires without damaging insulation
CONT mode to check for short and open circuits
Adjustable sensitivity for differentiating wires in close proximity
One-year warranty
Description
This Wire Tracer and Circuit Tester - including a sender and a detector - is designed to identify and trace wires or cables without damaging the insulation.
Use as Circuit Tester
Connect two alligator clips to the ends of the wire to check if resistance exists. If yes, the wire could be a short or open circuit. You can use the Wire Tracer function to locate the problem.
Use as a Wire Tracer
By sending a signal down the wire being tested, you can trace the wire with the detector probe. An audible tone will increase in volume as the probe gets closer to the wire. Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
For telephone lines, the Wire Tracer and Circuit Tester can identify Tip and Ring lines and determine the status of the line - clear, busy, or ringing - making it more convenient to maintain telephone lines.
Specifications:
Maximum length of cable tested: Allows for sending tone up to 328 feet / 100 meter (the wire being traced is connected to power)Frequency (nominal): 1.1 to 1.4 kHz for Sender; more than 30 Hz for Detector
Power: 2 x 6F22/9V batteries (not included)
Dimensions and Weight:
- Sender: 2.8 x 2.6 x 1.2 inch / 7 x 6.5 x 3 cm ; 3 oz / 85g
- Detector: 8.5 x 2 x 1.4 inch / 21.5 x 5 x 3.5 cm; 3.3 oz / 95g
Note: Do NOT connect to a DC circuit exceeding 42 volts or an AC circuit exceeding 24 volts.
Packaging Contents: detector, sender with RJ-11 plug and 2 alligator clips, manual. (batteries not included)