The 10 best cable toner and probe for 2019
Finding the best cable toner and probe suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best cable toner and probe suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best cable toner and probe
1. Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking
Feature
Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester.
Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers.
Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.
Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
Description
This instrument is a multifunctional handheld cable testing tool. Work perfect when RJ11 RJ45 cable is on power. It has a wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wiring engineering, and network maintenance person.General Technical Parameters
Operating temperature: 0 - 40 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Storage temperature: -10 - 50 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Altitude: less than 2000m
Anti-explosion rating: IP40
Distance of emitting signal: 300m or so
Emitter battery: 6F22 / 9V (not included).
Receiver battery: 6F22 / 9V (not included)
Specification Parameter
Product weight: 0.180 kg
Package weight: 0.270 kg
Product size: 20.00 x 4.00 x 3.00 cm / 7.87 x 1.57 x 1.18 inches
Package size: 22.50 x 12.20 x 4.70 cm / 8.86 x 4.8 x 1.85 inches
Scope of application: Education,Home appliance,Industrial,Market,Office,Supermarket
What's In The Box?
1 x FWT11 Emitter
1 x FWT11 Receiver
1 x Clip Adapter Cable
1 x RJ11 Adapter Cable
1 x User Manual
2. Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit, IntelliTone Probe and Toner Kit
Feature
IntelliTone digital toning eliminates noise and false signalsSmartTone analog toning precisely isolates individual wire pairs
Locates cables safely and effectively on active networks
Verifies twisted-pair installation with visual end-to-end continuity test
Probe detects digital signal and 1 kHz signal from the analog toner
Probe has built-in pair tester to identify open, shorted and crossed pairs
Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
Description
INTELLITONE 200 KIT. IntelliTone digital toning eliminates noise and false signals. Smart Tone analog toning precisely isolates individual wire pairs. Locates cables safely and effectively on active networks.3. Wire Tracker, Tacklife CT01 Cable Toner RJ11 RJ45 Wire Tracer, Multifunctional Cable Tester for Ethernet Network Cable Collation, Telephone Wire Tester and Continuity Checker, Built-in Flashlight
Feature
MULTIFUNCTION WIRE TRACING - Fast to locate the breakpoint without wire's cover damage, find the required line among numerous ones, and also can track the IN -WALL cables, perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter)And also with the Battery10V-110V positive and negative measurements functionNETWORK & TELEPHONE LINE TEST - It testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection; Adjust the volume of receiver by pressing the volume rotary knob
WIRE TRACKER - It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip; In this situation, the wires must be in power-off status, otherwise the units will be damaged; It is recommended to stripe down some of the wires when connecting through the clip; Select "SCAN". Emitter works properly if the "SCAN" indicator is on; Use the receiver to find target wires
EARPHONES DESIGN - With a pair of Earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment; Notice that if the sound is low, you should check whether the battery is powered off or not, and the LED flashlight allows operation in dark situation
PACKAGE CONTENT - Tacklife CT01 Wire Tracker Emitter, Tacklife Wire Tracker Receiver, RJ45 Adapter Cable, Crocodile Adapter Cable, 9V Batteries, Earphone, Black Case, English User's Manual, 24-Month Warranty
Description
Why to choose Tacklife CT01?Tacklife CT01 Wire Tracker Kit supports wide application
with reinforced cable types and multiple functions. It is necessary testing tool for telecommunication engineering,
wiring engineering and network maintenance person. Work perfect for Wire reacking,
Network cable, Positive and negative polarity, Telephone line test and Continuty checking.
This RJ11 RJ45 telephone network cable tester also fit for daily life, not only for professional person.
General Technical Parameters:
Operating temperature: 0F ~ 104C,maximal 80% relative humidity (non-condensing)
Storage temperature: 14F ~122F, maximal 80%.
Altitude: <2000m (meter)
Anti-explosion rating: IP 40
Distance of emitting signal: >30000cm
Safety class: IEC61010-1 600V CAT III, pollution class II
Battery transmitter: 6F22/9V
Battery receiver: 6F22/9V
Multi Application:
Telecommunication network, line engineering and routine maintenance
Computer network line engineering
Other metal wire wiring works and maintenance work
Note:
Do not use it to test a line with under a strong current(maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V);
Use a standard 9V alkaline product battery or 9V charging battery;
If the indicator sound is low, you should check whether the battery is powered off or not.
Reasonable design for perfect using in life!
Headset:
Can connect our headset to the headset jack of receiver in places with loud noise.
LED flashight:
If you are working in a dark space, you are able to see better.
Volume adjustable:
Adjust the volume of receiver by pressing the volume rotary knob during test to adapt to site environment.
4. Greenlee 701K-G Professional Tone and Probe Tracing Kit
Feature
Ease of operation and extremely reliableLarge speaker for noisy environments
Includes the 77HP-G high power tone generator and the 200EP tone probe amplifier
Comes in a rugged, woven nylon carrying case
Features an LED headlight, headset jack, short circuit beeper and external warble-select
Description
Greenlee is proud to introduce fully upgraded versions of its industry standard tone and probe tracing kits. These all new kits offer superior tracing for low-Voltage applications such as telephone, data and security alarm wiring. Essential equipment for the internal wiring technician, the Greenlee tone and probe kits provide the ability to check-Voltage on wire pairs as well as generate a tagging tone along the wire, which is then picked up by the tracing probe. Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone and probe kits promise to provide an enhanced customer experience for tracing and identifying single conductors or cables within bundles, either at midpoint or at remote ends. All of the new tone and probe kits are assembled in the USA and are CE certified. When it comes to superior tracing capability, Greenlee's new tone and probe kits are faster, safer and easier than ever before.5. UbiGear Network/Phone Cable Finder/Toner/Probe/Tracer/Tester + RJ11/RJ12/RJ45 Crimp Crimper + 100 Pcs RJ45 CAT5e Connector Plug Network Tool Kits (PremiumTester)
Feature
Cable Tester/Probe/Finder/Toner (1 set)1-PCS 568R Crimper -- works for RJ11 (6P4C), RJ12 (6P6C) and RJ45 (8P8C) connectors
2-PCS 9" ScrewDriver (flat & cross) AND 2-PCS Punch-Down Tools
3-PCS wire cutter (wire cutting piler/yellow cutter/grey adjustable cutter)
50-PCS RJ45 CAT5e 8P8C Pass-through Modular Plug Network Connector
Description
Description This instrument is designed to identify and trace wires or cables without damaging the insulation, you can also use it in checking for short circuit and locating open circuit and so on. In addition, it can also be used to identify some states of telephone. Designed for use with telephone lines, alarm cables, computer cables, intercom lines, speaker wires, and thermostat wiring Scanning Function - Find out working wire (network cables, phone lines, coaxial cable, buried cable and even cable behind wall) Cable Tester Function - Check the working state of each wire (RJ11/RJ45) Circuit State Test Function - Test if the circuit is working properly, or if there is a open/short circuit. Package Included: 1. 1 x Cable Crimper (for 8P8C RJ45 and 6P4C RJ11) 2. 1 x 6" Punch Down Tool KD-1 3. 1 x 3.5" Cable Cutter (Yellow) 4. 1 x Network Cable Tester 5. 1 x Multi-function Stripper/Cutter 6. 50 x RJ45 Pass-through Connector 7. 1 x Straight screwdriver 8. 1 x Cross screwdriver 9. 1 x wire cutter 10. 1 x Impact Punch Down Tool 11. 1 x Took Kit Case (10.5" X 13.5" when open) Brand Name: UbiGear (TM) with One-Year Limited Warranty6. Fluke Networks PRO3000F60-KIT Includes Tone Generator & Probe with 60Hz Filter and SmartTone Technology, 4962074
Feature
Clear - innovative filter technology blocks interference ("buzz") that makes tracing difficultPrecise - SmartTone technology provides five distinct tones for exact pair identification
Tone and trace wire on non-active networks
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud probe speaker is audible in noisy locations
Description
Stop the Buzz. Find Cables Faster with Clear, Precise Toning The probes innovative filter obstructs 60 Hz signals in the environment (caused by power cables and lighting) when listening for tone. The probes powerful speaker makes tracing cables through drywall easy. The toners SmartTone technology allows for exact pair identification.7. Triplett Fox & Hound 3399 Premium Wire and Cable Tracing Kit with Tone Generator and Probe with Adjustable Sensitivity
Feature
TriplettWire Tracing Kit With True Trace Technology. Trace Wires With Adjustable Sensitivity; Tone Generator Features 3 Methods Of Connectivity R-11
Rj-45
Tracer displays audi
Description
The FOX 2 and HOUND 3 wire tracing kit consists of a premium FOX 2 Tone Generator (Toner) and a newly designed HOUND 3 Inductive Amplifier (Probe). The FOX 2 is a battery operated handheld lightweight multi-function Toner that generates multiple tones, performs some basic telephone line tests (loop mA and line polarity), provides a visual and audible continuity test, and incorporates Tripletts True Trace and TripLatch tests. The HOUND 3 is a battery operated handheld lightweight Probe, with a thumbwheel Sensitivity control and Signal Strength indicator LED. It improves on previous designs (the HOUND and HOUND 2) with built-in LED illuminators, a bandpass filter, an earphone jack, and an easy access battery cover. An included convenient carrying case (with belt loop attachment) provides ease of use and protective storage for the FOX 2 and HOUND 3. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself in developing innovative, reliable, and durable test equipment for every technician--that also won't break the bank.8. Jonard Tools TETP-900 Multi-Function Cable Tester Toner and Probe Kit
Feature
Cable tester, tone tracing probe(2) BNC male to F female connectors
BNC cable terminator 50 ohm
RJ45 jumper
Nylon bag, belt clip, & user's manual
Description
Ideal for VDV (voice - data - video) professionals in telecommunications, network and digital communications. This is a multi-function cable tester for RJ45 LAN cable, BNC/F coaxial cable, 6P2C/4P2C jacks and provides tone generation.9. Greenlee AT8LK LAN Toner Kit
Feature
Greenlee AT8LK kit includes AT8L Lan Toner, 200GX inductive amplifier and rugged woven polyester carrying caseDesigned for the network installation and maintenance professional, the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity lights for fast identification
This kit can be used on any wiring system including datacom, telecom, security/alarm
Battery operated, 9V not included
Description
Includes AT8L LAN Toner and 200GX probe. Network device detection/link light blink feature on tone generator speaker bypass feature on probe when used with butt set.10. Triplett Fox & Hound Live Wire Circuit Tracing Kit - Tone Generator and Probe Set|Traces Wires Up to 1,000 ft. | Built in LED Indicator |Magnetic Backing | Moisture Resistant, Durable Design - (3388)
Feature
TriplettLive Wire Tracing Kit With True Trace Technology. Trace Wires Up To 1000Ft In Length And 3 Feet Underground With Adjustable Sensitivity And Tone. Tracer Has Built-In Noise Filter And Led He
Manufacturer name - TRIPLETT
Tracer has built-in noise filter and led head