temperature controller heat cool buyer’s guide for 2019
We spent many hours on research to finding temperature controller heat cool, reading product features, product specifications for this guide. For those of you who wish to the best temperature controller heat cool, you should not miss this article. temperature controller heat cool coming in a variety of types but also different price range. The following is the top 10 temperature controller heat cool by our suggestions:
We spent many hours on research to finding temperature controller heat cool, reading product features, product specifications for this guide. For those of you who wish to the best temperature controller heat cool, you should not miss this article. temperature controller heat cool coming in a variety of types but also different price range. The following is the top 10 temperature controller heat cool by our suggestions:
Best temperature controller heat cool
1. Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
Feature
This temperature controller is convenient to play and plug.The heat and cool functions can work simultaneously. BTW also work separately.
It is with temperature calibration and compressor delay which can protect your refrigeration.
Buzzer Alarm: High and low temperature alarms are available when the temperature is over or the sensor is with issue
Warranty: 1 Year.
Description
Temperature Control Range : -58~210 FTemperature Resolution: 0.1 F
Temperature Accuracy: 1F (-50 ~ 160 F)
Input Power: 100 ~240VAC, 50Hz/60Hz
Sensor Length: 2m / 6.56ft
Sensor Type: NTC sensor (Including)
Package:
1 x Temperature controller with outlet,
1 x English Manual
2. Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
Feature
REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCCSMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
Description
How To UseStep 1: Insert 2pcs AAA batteries into the remote controller
Step 2: Ambient temperature detected by remote automatically (current temperature)
Step 3:
Select heating or cooling mode
Click ON or OFF button, Heating symbol or Cooling symbol will flashing about 10 seconds and then heating or cooling mode selected successfully
Step 4:
Switch /
Press +/ON and -/OFF button together at the same time, then switch from to or from to
Step 5: Switch in AC power outlet and plug your appliance into thermostat outlet, red LED indicator will blink, current temp signal from remote controller will be received after LED indicator stop to blink
Step 6: Preset your target temperature in remote controller,then target temp signal transmitted to thermostat outlet
Step 7: Current temperature reach target temperature, then thermostat outlet disconnect from AC power automatically and appliance stop to heat or cool, constant temperature maintained in your room
Spec
Max Rating: 120V/15A/60Hz/1800W
Transmission Frequency: 433.92MHz
Max. Range: 40m in Open Area
Current Temp. Range: 0C~60C/32F~140F
Target Temp. Range: 0C~60C/32F~140F
Tolerance: 1C or 1F
Remote Control Power: 2pcs * AAA 1.5V Batteries
Note
1.The thermostat is intended for indoor use only
2.Actual use shows that heating effect is better than cooling effect
3.Reinstall batteries to change heating or cooling mode
4.To get better effect of constant temperature, please place remote controller and thermostat outlet in the same room or different rooms which have similar ambient temperature
5.Remote control distance varies according to obstacle such as wall thickness
What's In The Box
1*Wireless Thermostat Outlet
1*Remote Control
1*User Manual
3. Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter
Feature
Fahrenheit and Celsius Display Can Be ChooseAlarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Temperature Calibrating, Refrigerating control output delay protection
Description
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor Cooling/HeatingMounting dimension:
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: 1 oF-50 oF -160 oF/ 1 oC-50 oC -70 oC
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x ITC-1000 Temperature controller 110v with 6.67 NTC Sensor
FAQ:
1. How to wire? Q: I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals.
A: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit.
2. Q: The cooling device doesn't work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing.
A: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.
4. Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Breeding Reptiles Hatching Heat Mat ITC-306T 10A 100V
Feature
[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Description
Inkbird day and night temperature controller is a pre-wired heating output temperature controller(No Cooling Control) with time function specifically for breeding and planting. It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.With large power output 1,200W, it's suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Features:
Temperature Control Range: -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F
Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-58 ~ 160 F)
Input Power : 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature : -30~ 75 C / -22~ 167 F
Storage: Temperature -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Dimension: Body:140x68x33mm (5.5x2.7x1.3 inch.)
Socket:85x42x24mm (3.3x1.7x1 inch.)
Warranty: 1 Year
Package Inlcuded:
1 x Temperature and Time Controller
1 x Manual
5. Diymore W1209 Digital Blue LED Display DC 12V Heat Cool Temp Thermostat Temperature Control Switch Module On/Off Controller Board + NTC Sensor
Feature
PT100 Cable Length: 50cm .High temperature protection: 0-110.
Static current: 35MA, attract current 65MA.
Measurement input: NTC (10K 0.5%) Waterproof Sensor.
Resolution: When temperature is 0.1, the resolution is -9.9~99.9, other temperature segment is 1.
Description
Temperature range :-50-110Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Control accuracy: 0.1
Hysteresis accuracy: 0.1
Refresh rate: 0.5S
Supply voltage: DC 12V
Output voltage: DC 12V
Output power: 20A relay
Environmental requirements: -10 ~ 60 Humidity 20% -85%
How to use:
Connect the power supply and the load, you can supply to the controller,
It's displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:
Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package included:
1 x DC 12V -50-110C W1209 Digital Thermostat Temperature Control Switch Sensor
6. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
[Convenient Design] Plug and play, easy to use.[Reading Mode] Support reading with Centigrade or Fahrenheit unit.
[Safe] Maximum output load: 1100W(110V).
[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Description
Features:- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
- Temperature calibration
- Compressor delay protection for refrigeration control
- High and low temperature alarms are available
- Over-temperature and sensor fault alarm
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change
Specification:
Temperature Control Range: -50~99C / -58~210F
Temperature Resolution: 0.1C / 0.1F Temperature Accuracy: 1C (-50~70C) / 1F (-50~160F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3inch)
Socket Dimension: 85x42x24mm (3.3x1.7x1inch)
Ambient Temperature: -30~75C / -22~167F
Storage Temperature: -20~60C / -4~140F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Note:
This listing sensor's probe dimension is 50mm x 6mm.
If you want 12" probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.
7. Inkbird C206 10A Heat Mat Temperature Controller with Outlet, 6.56FT NTC Sensor, F and C Degree, 50-108F, Without Cooling Function
Feature
[Only Heating] Please note: it's only heating function controller. There is no cooling function. Don't buy it if you need cool controller.[Multipurpose] Keep your desire temperature for your seed heat mat, aquarium heater, brewing heater, etc.
[Design & Function] Support reading with Centigrade or Fahrenheit and Temperature calibration. Plug and play design, easy to use.
[Three Display Window] Be able to display 3 different details such as the measured temperature, the low and high temperature at the same time.
[Waterproof Probe] The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57"x 0.2".
Description
Attention: Please note that it is only with Heat Function. No Cool Function.Specification:
Input: 100~265VAC 50/60HZ
Maximum Current: 10A
Maximum Power: 1100W (110V)
Temperature Control Range: 10-42C / 50-108F
Ambient Temperature: -30~75 C (-22~167F)
Dimension: ( 3.66(L)*2.48(W)*1.34(H) in )
Package Included:
1 x Temperature Controller C206
1 x 6.56FT Sensor
1 x Manual
8. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
Feature
Large LCD screen, glare free and eye protected, plug and play design, standard U.S. outlet, can be used for heating mode or refrigeration modeThe temperature sensor is made of silicone, is waterproof with high quality, high-accuracy
Easy to use and program; Only 2-step settings for your application, and plug and play design.
Support reading with Centigrade or Fahrenheit unit
Wide uses: wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, Boiler operating control, BBQ, etc .
Description
Features:Large LCD screen, glare free and eye protected;
Support reading with Centigrade or Fahrenheit unit;
Easy to use and program; Only 2-step settings for your application, and plug and play design;
With a temperature correction function. Max current: 10A;
Max output load: 1100W@110V, 2200W@220V;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120, -40~248
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1, 0.1
Temperature Accuracy: 1, 1
Buzzer Alarm: High and Low Temperature Alarm
Input sensor: NTC Waterproof, sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
9. KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 1100W with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles
Feature
DUAL RELAY OUTPUT AND TWO TEMPERATURE SETPOINT. Can be connected with refrigeration and heating equipment at the same time. One setpoint for heating and one for cooling. Automatic conversion of cooling and heating. Maximum output load 1100W ( 110V)BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
GREAT SENSOR WITH HIGH SENSITIVITY UNDER 1 ACCURACY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping, for reducing accumulated temperature error after equipment stopped. The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
USEFUL ADDITIONAL FUNCTIONS. Temperature calibration, cooling delayed, over-temperature and sensor fault alarm. To avoid displaying the wrong temperature, refrigerator damaged and temperature exceeded.
Description
90 DAY Warranty -- All KETOTEK customers enjoy 90 Day Warranty. You have no risk to try and we will provide you the best service!
Specifications
Power Supply: 110Vac15% , 60hz
Temperature control range: LS1~LS2
Temperature setpoint LS1 range: -19.9~LS2
Temperature setpoint LS2 range: LS1~199.9
Heating differential value:1~25
Cooling differential value:1~25
Accuracy: 1
Resolution : 0.1
Sensor input: NTC Waterproof sensor 1m/3.28ft
Relay contact capacity: Cool Heat(Max 10A 110Vac each)
Ambient temperature: -4-140 , humidity 20% -85%RH
Power consumption: 3W
Warning Tips
The sensor probe is waterproof, but the controller is not waterproof. Keep the controller away from water.
The maximum current of each output is 10A
(1100W@110V). Check the amp and watt of heating and cooling equitments to avoid the risk of overloading.
In order to make sure the controller work under high performence condition. We recommend to use maximum power 800W when you use resistive load such as heating rod, heating pad, electric water heater etc. We recommend to use maximum power 275W when you use inductive load such as compressor , heat pump etc.
Package Content
1 x KT4000 temperature controller
1 x User manual
10. Inkbird 12 periods Timer Stage ITC-310T-B Digital Heating & Cooling Pre-wired Temperature Controller For Home brewing, Greenhouse, Heating mat
Feature
[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
[Mode & Function] Support F/C mode and easy to set. Alarm when over-temperature and sensor error.
[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Description
ITC-310TB is a dual-relay outlet thermostat with programmable timer function, which can be set to automatically control 12 periods timer stage with different temperatures.The ITC-310TB is mainly used to control temperature during fermentation process of beer and wine brewing.
It also widely used in home brewing, aquarium, pet breeding, hatching. What's more, it's multipurpose for you to use in boiler temperature control, geothermal temperature control, heating pump constant temperature cycle, strain culture fermentation, seed sprouting, electric heating, electric oven, over-temperature protection and automatic temperature control system of all kinds of electrical equipment, etc.
Specification:
Temperature Control Range : -50~120C /-58~248 F
Temperature Resolution : 0.1 C / 0.1F
Measuring Accuracy : 1C (-50 ~ 70C) / 1F (-58 ~ 160F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Timing Accuracy: 24 hours1.7s
Periods of Time Max: 12 periods
Cycle Setting: 1-999 times cycle, or 00 infinite cycle
Input Power: 100 ~240VAC, 50Hz/60Hz
Control Output Current: Max.10A
Power: Max.1200W(120V)/2200W(220V)
Alarm: High/ Low Limit setting Alarm
Sensor Type: NTC Sensor (including)
Sensor Length: 2m / 6.56ft
Relay Output: Cooling (10A,100-240VAC)
Heating(10A,100-240VAC)
Input Power Cable Length: 1.5m ( 5ft )
Dimension: 140x68x33 mm(body)
Operating Ambient Temperature: -30~ 75 C / -22~ 167F
Storage Condition Temperature: -20~ 60C / -4~ 140F
Humidity: 20~85% (No freeze or moisture condensation)
Warranty: 1 Year
Package Included:
1 x ITC-310TB Thermostat with Timer
1 x Manual