Usmile Matek Systems F405-STD BetaFlight STM32F405RGT6 Flight Controller Built-in OSD Inverter for SBUS Input for Martian Alien Carbon Fiber quadcopter X frame Carbon Fiber FPV Racing Quad Drone Frame

Related posts

Feature

Nice layout. Makes for a very nice clean build especially together with the FCHUB-6S Hub PDB http://www.amazon.com/dp/B073Z7KPVZ.
Supports a non inverted SBUS signal input with 5x UARTs, All pins are well labeled and easy to solder. ESC signal pins in corners.
With ribbon cable between the FC and PDB, it makes for a clean install.
OSD feature is also a great feature as well you can now change pids in the field without a laptop
For more detailed info about connection guide/Boot mode/OSD/Firmware downloads, please visit http://www.mateksys.com/?portfolio=f405-std

Description

This FC is a great combo with Matek FCHUB-6S hub, makes for a clean build, check it here http://www.amazon.com/dp/B073Z7KPVZ
MCU: 168MHz STM32F405RGT6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
6x PWM / DShot outputs without conflict
2x 2812LED outputs option
5x UARTs
1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
36x36mm PCB with 30.5mm mounting holes
w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
w/ 4pcs M3 Anti-vibration Standoffs

Other parts you might be interested:
5.8G fpv receiver for Android phone http://www.amazon.com/dp/B06ZZG6GSR
5.8G FPV receiver for iphone/ipad/Android www.amazon.com/dp/B0741T9DT8
Self-binding Micro DSM2 DSMX receiver http://www.amazon.com/dp/B01NAEN5RG http://www.amazon.com/dp/B01JWFCRYA
5 Inch 800*480 400lux LED Monitor http://www.amazon.com/dp/B01K1U7LU0
1.5W Super Bright LED Head Lights http://www.amazon.com/dp/B019FD678G