EG Starts Arcade Buttons Chrome Silver Plated 5V / 12V LED Illuminated Push Button 1P / 2P Player Start Buttons / 2x Coin Buttons for MAME / JAMMA / Fighting Games / Arcade Video Games Kit Parts

Related posts

Feature

Mounting hole required: 24mm - 28mm
Overall diameter of button across plunger: 32mm
Maximum depth of button from top of plunger to bottom of microswitch: 65mm
Microswitch reliability tested to 10,000,000 cycles
Each package includes: 1x 1 Player, 1x 2 Player and 2x Coin buttons

Description

This listing is for 4 x New Chrome Illuminated Arcade Buttons

All the buttons are not metal.

If the LED does not light. Then please exchange the location LED interface.

Give your arcade project the wow factor with this translucent, illuminated arcade button. Each button comes complete with a fixing ring, bulb holder, spacer, microswitch and 12V LED.
If you decide to illuminate the LED supplied with this arcade button, you will need a 5V power supply. This can be taken from a spare molex connector (yellow wire) on a PC power supply or a Jamma PSU. This button will mount in a 24mm to 28mm hole.

What's included with this button?
4 x LED Illuminated Push Button
4 x Fixing ring
4 x 12V LED Lamp (We will add one lamp as a gift)
4 x Bulb holder
4 x Microswitch (We will add one Microswitch as a gift)

Product Dimensions:
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Maximum depth of button from top of plunger to bottom of microswitch: 65mm

Wiring Information:
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection