Plasma Table - Water table for hand held plasma cutters

Related posts

Feature

Water tub sold separately
Water catches plasma cutting stream without splashing back
Quick release clamp holds work, guide, straight edge and our Plasma Stencils
Great for portable, temporary and/or permanent use
Easy to replace cutting slats

Description

Water tub is sold separately, welding required for assembly

The Plasma Table will sit on top of a Behrens 17 gal. tub or standard 55 gal. drum that is filled with water, this creates a very economical and effective Plasma Table. All of the sparks/slag and most of the smoke is captured with a 5" air gap above the water. We include a quick release clamp with an extended arm to firmly hold a straight edge, guide or our Plasma Stencils. This allows you to use both hands for guiding your plasma cutter to make precise cuts. Because the clamp can be positioned 360 around the table, you can usually cut an entire small part out without moving the material. The usable cutting area is 21".

The cutting slats just drop into place, which makes them easy to replace. They are 1/8" x 2" flat bar and included in this kit. The table requires welding to assemble, it will take about 30 minutes to layout, tack and weld. Bolts are included to attach the table to the tub, which makes it easy to move around. The Plasma Table just rests on top of the tub, so it's easy to take apart and throw in the corner when your not using it. The Behrens 17 gallon galvanized steel tub is a great choice for those that want a quick and easy set up. Most farm or hardware stores have them in stock and they are sold through many online stores, just make sure you get the Behrens brand. It takes about 10 gallons of water to get a 5" air gap. Or a standard 55 gallon drum can be cut down to 8" high and use 5 gallons of water.

YouTube video links (copy and paste)
60 second demo - www.youtube.com/watch?v=THdbVbB2rHA
5 min. making a trans mount - www.youtube.com/watch?v=L9UA4KCU6Iw