EH-5A 12V-24V Adapter Step-Down DC Cable + EP-5B DC Coupler EN-EL15 Dummy Battery for Nikon V1 D850 D810 D800E D750 D610 D600 D500
Related posts
Feature
Step-down cable:Input DC Female plug size is: 5.5mm2.1mm/2.5mm,Please note the size of the output plug of the external power adapter: 5.5mm2.1mm/2.5mm Male, Support most of the power adapter that output voltage is 12V to 24V, current 1.5A or above.In order to avoid the interface between the dummy battery and the USB cable, long-term multiple insertions and removals result in wear and poor contact. After removing the dummy battery from the camera, it is recommended that you do not separate the connection between the dummy battery and the USB cable.
Some cameras require that the lid of the camera's battery compartment must be closed, After closing the lid, the camera can be turned on, For details, see the Manual illustration.
Easily use your own 12V-24V power adapter. dc step-down cable is suitable for 12V-24V power adapters for some printers, surveillance cameras, car chargers, routers, monitors, etc.
If you have any problem during using our product,you are welcome to contact us for further assistance. We will do our best to assist you and making you 100% satisfaction.
Description
Step-downVoltage DC Cable DCInput : 12V-24V, current 1.5A or more.
DC output: 9V
DC step-downcable length: 60cm
Compatible with:
For Nikon D500
For Nikon D600
For Nikon D610
For Nikon D750
For Nikon D850
For Nikon D800
For Nikon D800E
For Nikon D810
For Nikon D810A
For Nikon D7000
For Nikon D7100
For Nikon D7200
For Nikon D7500
For Nikon 1 V1
and more models.
Package include:
1 x DC step-down cable(input Female plug:5.5mm*2.1mm/2.5mm-output Male plug 4.0mm*1.7mm) 1x DC Coupler EP-5B(EN-EL15 dummy battery input femaleplug:4.0mm*1.7mm)
1 x Free cable (male to male)
(DC drive cable, Customized production, Strict inspection,High quality chip,Efficient conversion rate.)
Compare the dcstep-downcable with the USB step-upcable:
(1)The dc step-downcable can easily find an external power supply that meets the requirements and can provide a more adequate instantaneous power requirement for the camera shutter.
(2)The USB step-upcable has high requirements for the mobile power of the USB power interface, which involves the supply voltage, the quality of the internal battery cells, and the discharge switch current of the board chip.
Tips:
General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).