Konmison 1Set Mini CNC Lathe Air Cooled 500W Spindle Motor CNC 0.5KW with 52mm Clamps and 110V Mach3 Power Converter Spindle + 13pcs ER11

Related posts

Feature

Air Cooled Spindle - 110VAC MACH3 - Analog Input; Torque: 5000G/CM
High precision spindle run out 0.01-0.03; Speed: Up to idle up to 11000 rev / min
Operating voltage: 100VDC; Power: 500W; Spindle diameter: 52mm
Applied to Lathes, Mills, Car Hoists, Pumps and Conveyors, etc.
Stiving for 100% service satisfactory. Any issue please contact us, we would always try our best to help you.

Description

CNC 500W Air Cooled Spindle Kit for DIY Engraving

Package Included:
1 x 500W Air-Cooled Spindle Motor
1 x 110V Speed Governor with MACH3
1 x 52mm Mount Bracket
13 x ER11 collect
4 x Screws

Features:
Input: AC110V10%50/60Hz
Operating voltage: 100VDC
Power: 500W
Current: 4A
Speed: up to idle up to 11000 rev / min
Torque: 5000G/CM
Insulation resistance: > 2 megohms
Dielectric strength: 400V
Spindle diameter: 52mm
Chuck portion length: 45mm
Chuck portion diameter: 16mm
Motor length: 200mm
High precision spindle runout 0.01-0.03
Power supply Specification: (and this spindle supporting the use of the)
13pcs ER11 collet set gripping range: 1MM to 7MM
(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm); Run-out tolerance 0.01mm (0.0006")

Note:
1. The mounting bracket is NOT threaded. You will need to bolt this to a threaded object for it to hold. The bracket has only clearance holes.
2. Suitable for light carving(wood or light aluminum) operations, NOT for high density aluminum or steel.