[Gulfcoast Robotics] 3D Printer Borosilicate Glass 255x230x4mm for Original Prusa i3 MK2 MK2S 3D Printers - 4mm Thick

Related posts

Feature

Fits Prusa i3 Original MK2 / MK2S heated bed
4mm thick - will not break when you remove your print from it
Cut corners, beveled edges, 100% borosilicate glass content
It is a flat, heat resistant plate and does not warp during long term use

Description

This product is 100% borosilicate glass. It is a flat, heat resistant plate and does not warp during long term use. 4mm thick - will not break when you remove your print from it.

This borosilicate glass plate is 250x235mm - a perfect fit for the original Prusa MK2 and MK2S heated bed. This plate is larger and thicker than the typical 3mm plates, ensuring a perfectly flat build surface.

Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. It is resistant to cracking as a result of direct high heat, making it an excellent choice for 3D printer beds. Placed on top of your build plate, it can be held in place with binder clips or thermal pads.

Please take a look at the supplied drawing for dimensions and details.

Glass plate features:

Dimensions: 250x235mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lime glass green tint).
Cut corners to match build plate and to improve handling safety.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heated bed.

Package Contents:

1 x Borosilicate Glass Print Surface 250x235mm x 4mm thick.