3 Axis Controller Kit Nema23 270oz-in CNC Stepper Motor (Dual Shaft) 76mm 3A & TB6560 Driver+350W 24V power supply for CNC Router

Related posts

Feature

Model Number:23HS8430B /TB6560 MD430;Type:Hybrid
Step Angle(degrees):1.8deg;Power supply:350W 24V DC;
Driver electric current:3.5A;Driver microstep:256 microstep
Driver TB6560 MD430 single axis Driver;Breakout board:5Axis CNC breakout board
Holding Torque:270 oz-in/180N.cm;Motor Size:57x57x76mm;Phase:2;Motor wire:4pcs ;User manual can download from this link:https://drive.google.com/drive/folders/1t1VrEOo4s-Nc1lSvzpSQen_FgypG9YNF?usp=sharing

Description

Package include:

3 x TB6560 MD430single axisdriver

3 x 23HS8430B stepper motor 76mm 270oz-in dual shaft

1 x 350W 24V DC switching power supply

1 x 5 axis breakout board

1 x DB25 parallel cable

1 x USB cable

English user manual for breakout board and stepper motor driver will send by email.

TB6560 MD430 Low noise of stepper motor driver

1. Introduction

MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth--S3/S4), torque (100%, 75%, 50%, 20%--S5/S6) ,work current (0-3A--SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%).MD430-HZ

2. Features

1) Single-chip motor driver for sinusoidal microstep control of stepping motors

2) Power on in indication led

3) 3Amps-34Volts(Supply voltages:12-34DC)

4) Full step, half step, eight step and sixteenth step(selection with dipswitches)

5) Torque (100%, 75%,50%, 20%)

6) Work Current (0-3A selection with SW1/SW2/SW3)

5 axis CNC Breakout board interface adapter board

full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control;

Stepper Motor

General Specification:

Step angle accuracy:+ - 5%(full step,not load)

Resistance accuracy: + - 10%

Inductance accuracy:+ -20%

Temperature rise: 80deg Max(rated current,2 phase on)

Ambient temperature -----------20deg ---- +50deg

Insulation resistance:100ohm Min,500VDC

Insultion Strength--------500VAC for one minute

Datasheet(23HS8430B,front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque)

Switching power supply

350W 24V/10 A,single output switching power supply