Looking for a b500k push pull? Have a look at this 2019 guide!

By Elsie Butler 4 years ago

Shopping for the best b500k push pull is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy b500k push pull. Don’t worry any more! We spend many hours to review and compare b500k push pull to make the short list for you. Let’s check which product is suitable with you.

Shopping for the best b500k push pull is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy b500k push pull. Don’t worry any more! We spend many hours to review and compare b500k push pull to make the short list for you. Let’s check which product is suitable with you.

Best b500k push pull

Product Features Go to site
B500K Push Pull Potentionmeter Volume Tone Shaft Switch Pots Guitar Bass Pack Of 3 B500K Push Pull Potentionmeter Volume Tone Shaft Switch Pots Guitar Bass Pack Of 3 Go to amazon.com
B500k Push Pull Split Knurled Long Shaft Audio Taper Guitar Swicth Control Pot Potentiometer for Electric Guitars Bass B500k Push Pull Split Knurled Long Shaft Audio Taper Guitar Swicth Control Pot Potentiometer for Electric Guitars Bass Go to amazon.com
Musiclily B500k Push Pull Split Knurled Short Shaft Metric 15mm Linear Taper Guitar Volume Switch Control Pot Potentiometer for Guitar Bass Parts, Chrome (Pack of 2) Musiclily B500k Push Pull Split Knurled Short Shaft Metric 15mm Linear Taper Guitar Volume Switch Control Pot Potentiometer for Guitar Bass Parts, Chrome (Pack of 2) Go to amazon.com
Metallor Push Pull Pot DPDT Switched Guitar Bass Potentiometer Audio Volume Tone Split Shaft Control Switch 18mm with Nuts and Washers Guitar Parts Replacement (B500K) Metallor Push Pull Pot DPDT Switched Guitar Bass Potentiometer Audio Volume Tone Split Shaft Control Switch 18mm with Nuts and Washers Guitar Parts Replacement (B500K) Go to amazon.com
IKN 4pcs B500K Push Pull Guitar Tone Volume Control Pot Potentiometer/Linear Potentiometer L15mm Shaft IKN 4pcs B500K Push Pull Guitar Tone Volume Control Pot Potentiometer/Linear Potentiometer L15mm Shaft Go to amazon.com
[ Gold ] Guitar Bass Push Pull Potentionmeter, B500K with Control Pot Potentiometer, Volume Tone Shaft Switch Pots ( Pack of 3) [ Gold ] Guitar Bass Push Pull Potentionmeter, B500K with Control Pot Potentiometer, Volume Tone Shaft Switch Pots ( Pack of 3) Go to amazon.com
IKN B500K Push Pull Guitar Switch Pots Long Split Shaft Potentiometer for Electric Guitar Parts Pack of 10 IKN B500K Push Pull Guitar Switch Pots Long Split Shaft Potentiometer for Electric Guitar Parts Pack of 10 Go to amazon.com
KAISH Guitar Bass Push Push Pot(No Pull Anymore) Linear Taper Guitar Potentiometer Pots with USA/Imperial Brass Shaft B500K KAISH Guitar Bass Push Push Pot(No Pull Anymore) Linear Taper Guitar Potentiometer Pots with USA/Imperial Brass Shaft B500K Go to amazon.com
3PCS18MM B Push Pull Potentiometer B500K Black 3PCS18MM B Push Pull Potentiometer B500K Black Go to amazon.com
guitar parts Push Pull B500K DPDT Coarse Spline Split Shaft Linear Pot Potentiometer guitar parts Push Pull B500K DPDT Coarse Spline Split Shaft Linear Pot Potentiometer Go to amazon.com
Related posts:

1. B500K Push Pull Potentionmeter Volume Tone Shaft Switch Pots Guitar Bass Pack Of 3

Feature

B500K-ohm control pot
Guitar Tone Potentiometer
B500K Push Pull Control Pots

Description

100% new never used
Guitar Tone Potentiometer
B500K-ohm control pot
Split shaft with coarse knurling
Coarse knurled shaft fits most control knobs
Split Shaft Diameter:Approx. 6mm
Shaft Length:Approx. 18mm
Shaft Thread diameter:Approx. 7mm
Full Length:Approx. 44mm
Base Diameter:Approx. 16.5mm
Color:Chrome

Package Included:3 x B500K Push Pull Control Pots

2. B500k Push Pull Split Knurled Long Shaft Audio Taper Guitar Swicth Control Pot Potentiometer for Electric Guitars Bass

Feature

High Quality B500k coil tap push/pull pots.
18mm shaft length, fits all standard 7mm pick guard hole size.
Split shaft with coarse knurling fits most control knobs.
Shaft Diameter: 6mm
Whole Length: 43mm ; Shaft Length: 18mm

Description

Item Descriptions:
-High Quality B500k coil tap push/pull pots.
-18mm shaft length, fits all standard 7mm pick guard hole size.
-Guitar volume Potentiometer
-Split shaft with coarse knurling
-Coarse knurled shaft fits most control knobs
-Comes with the nuts and washers.
-Great for upgrading/adding switching options without the need for any extra drilling, fits in existing volume pot hole of most guitars.
-Serves as both volume control and switch for coil splitting, tapping, phase switching etc.
-A is usually used for tone control, B is generally used for volume control

Package:
1x B500k guitar potentiometers

Item Specifications:
Whole Length:43mm
Shaft Length:18mm
Shaft Diameter:6mm
Type:B500k
Brand:Unbranded/Generic

3. Musiclily B500k Push Pull Split Knurled Short Shaft Metric 15mm Linear Taper Guitar Volume Switch Control Pot Potentiometer for Guitar Bass Parts, Chrome (Pack of 2)

Feature

Fits Stratocaster and Les Paul 6MM knobs,Fits 6.0mm diamerter metric knobs as well.Ideal for electric guitar or bass building.
Full Resistance:500k ohm;Linear Taper
Shaft Length: 15mm Shaft Diameter: 6mm; Full Size; Whole Length: 43mm;
Metric Size is popular in guitars bass made outside the USA/Mexico.
Package Include: 2 x guitar potentiometers

4. Metallor Push Pull Pot DPDT Switched Guitar Bass Potentiometer Audio Volume Tone Split Shaft Control Switch 18mm with Nuts and Washers Guitar Parts Replacement (B500K)

Feature

B500 kOhm linear taper potentiometer with Double Pole Double Throw ( DPDT on-on ) push / pull switch. 6mm splined shaft to accept standard push on control knobs.
This switched pot is suited to being used in place of the standard volume pot, although it is personal choice whether you use these taper pots for volume or tone, on a single coil equipped guitar to provide tonal switching options. Typical uses include phase reversal, tone capacitor switching, tone bypass etc.
Shaft length: Approx. 18mm Shaft diameter: Approx. 6mm Whole length: Approx. 45mm Base size: Approx. 22mm
Perfect for replacing and upgrading volume controls
Package included: 1pc potentiometert, Supplied with 2 x mounting nuts and washer.

Description


250K VS 500K

Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off some of the high frequencies to ground. A 1 Meg-ohm pot bleeds off even less than a 500K pot, so if you want to hear your guitar "wide open" you may want to try one.

Product description

100% new never used
Guitar volume potentiometer
B500K-ohm control pot
Split shaft with coarse knurling fits most control knobs
Split shaft diameter: Approx. 6mm
Shaft length: Approx. 18mm
Full length: Approx. 45mm
Base diameter: Approx. 22mm
Color: Chrome

Package included:

1pc B500K push pull control pots, Comes with nut and washer

5. IKN 4pcs B500K Push Pull Guitar Tone Volume Control Pot Potentiometer/Linear Potentiometer L15mm Shaft

Feature

Fits Strat Style and Les Paul Style 6MM knobs,should also fits other 6mm knobs as well.Ideal for electric guitar or bass building
B500K, Shaft Length: 15mm Shaft Diameter: 6mm
Base Diameter: 16mm
Full Size; Coarse knurled shaft fits most control knobs
Package Included: 4 x Guitar Bass Pots

Description

Feature:
100% Brand new,never used and testing is fine.
High quality push pull potentiometer, perfect for replacing and upgrading tone controls.
Coarse knurled shaft fits most control knobs.

Specification:
Full Resistance: 500K ohm
B Type.
Push pull potentiometer.
Shaft Length: Approx.15mm
Shaft Diameter:Approx. 6mm
Whole Length: Approx.43mm
Base Size:12 x 16mm

Package Include:
4 x B500K Pots

6. [ Gold ] Guitar Bass Push Pull Potentionmeter, B500K with Control Pot Potentiometer, Volume Tone Shaft Switch Pots ( Pack of 3)

Feature

Guitar Tone Potentiometer
B500K-ohm control pot
Shaft Thread diameter: Approx. 7mm
Shaft Length:Approx. 18mm
Coarse knurled shaft fits most control knobs

Description

Specification:
100% Brand New,Never Used
Guitar Tone Potentiometer
B500K-ohm control pot
Split shaft with coarse knurling
Coarse knurled shaft fits most control knobs
Split Shaft Diameter:Approx. 6mm
Shaft Length:Approx. 18mm
Shaft Thread diameter:Approx. 7mm
Full Length:Approx. 44mm
Base Diameter:Approx. 16.5mm
Color:Gold

Package Included:3 x B500K Push Pull Control Pot

7. IKN B500K Push Pull Guitar Switch Pots Long Split Shaft Potentiometer for Electric Guitar Parts Pack of 10

Feature

Fits Strat Style and Les Paul Style 6MM knobs,should also fits other 6mm knobs as well.Ideal for electric guitar or bass building
B500K, Shaft Length: 18mm Shaft Diameter: 6mm
Whole Length: 43mm Base Diameter: 16mm
Full Size; Coarse knurled shaft fits most control knobs
Package Included: 10 x Guitar Bass Pots

Description

Specification:

*Push Pull Control Potentiometer 18mm Long Split Shaft.
*Coarse knurled shaft fits most control knobs.
*Full Resistance: B500K.
*B Type Push Pull Potentiometer.
*Shaft Length: Approx.18mm.Shaft Diameter:Approx.6mm.Whole Length: Approx.43mm.Base Size:Approx.12 x 17mm.

Package Include:

*10pcs push pull control pots.

8. KAISH Guitar Bass Push Push Pot(No Pull Anymore) Linear Taper Guitar Potentiometer Pots with USA/Imperial Brass Shaft B500K

Feature

Still use Push Pull Pots? Try to use these Push Push Pots now,one downward touch does it all,no clutching and fumbling forever,there is no need to pull anymore
USA/Imperial 3/8-32'' Brass Shaft with 6mm knurled split shaft; Please verify the dimensions carefully before you order the item
Great for custom wiring such as coil tapping, phase, and series/parallel
Audio Taper (A) increases or decreases in a sloped curve fashion ; Linear Taper (B) increases or decreases in a linear fashion; Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference
Instructions are not included,please consult your local luthier for installation

Description

Guitar Bass Push Push Pot(No Pull Anymore) Guitar Potentiometer Pot with USA/Imperial Brass Shaft

9. 3PCS18MM B Push Pull Potentiometer B500K Black

Feature

Material:Metal
Use for electric bass guitar building
Ideal for replacing and upgrading volume and tone controls

Description

"Material:Metal
Color:Black
Size:45 x 23mm/1.7 x 0.9in(LxW)

Ideal for replacing and upgrading volume and tone controls
Use for electric bass guitar building
Long Knurled and split shaft

Package Include:
3 x B500k Guitar Potentiometers "

10. guitar parts Push Pull B500K DPDT Coarse Spline Split Shaft Linear Pot Potentiometer

Feature

Metric Push Pull B500K Linear Split Shaft Pot Import Coarse Spline Potentiometer.
Push Pull B500K DPDT Coarse Spline Split Shaft Potentiometer.. 500K Linear Taper.
7.8mm diameter mounting shaft ..3/8" (9.5mm) threaded shaft length.
1 1/16" (27mm) mounting depth.. Includes 1 mounting washer and nut.
*Products can be expensive..Please compare prices before buying.* *Products shipped from the US.*

Description


Metric Push Pull B500K Linear Split Shaft Pot Import Coarse Spline Potentiometer..
500K Linear Taper.
7.8mm diameter mounting shaft.
3/8" (9.5mm) threaded shaft length.
1 1/16" (27mm) mounting depth.
Includes 1 mounting washer and nut.
*Products can be expensive..Please compare prices before buying.* *Products shipped from the US.*

Conclusion

All above are our suggestions for b500k push pull. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using b500k push pull with us by comment in this post. Thank you!
Tags: