Expert choice for impact c stand
When you want to find impact c stand, you may need to consider between many choices. Finding the best impact c stand is not an easy task. In this post, we create a very short list about top 10 the best impact c stand for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 impact c stand:
When you want to find impact c stand, you may need to consider between many choices. Finding the best impact c stand is not an easy task. In this post, we create a very short list about top 10 the best impact c stand for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 impact c stand:
Best impact c stand
1. HyperX Kingston FURY 16GB Kit (2x8GB) 1866MHz DDR3 CL10 DIMM - Black (HX318C10FBK2/16)
Feature
Asymmetric heat spreader for stylish heat dissipationEasy to install Plug-and-Play functionality, Unique tested with all popular brands of motherboards
Automatic Overclocking - reach faster speeds and higher capacities by just installing the memory, no adjustments in BIOS needed
Compatible with H67, P67, Z68, Z77, Z87 and H61 Intel chipsets, as well as A75, A87, A88, A89, A78 and E35 AMD chipsets
Guaranteed - lifetime warranty, free technical support
Description
Effortless Upgrade, Relentless StyleGet in the game with HyperX FURY. Even newbies get up to speed fast, since FURY automatically recognizes its host platform and automatically overclocks to the highest frequency published - up to 1866MHz - providing plenty of power for your next deathmatch.
FURY's asymmetric heatspreader design lets you stand out from the 'square' crowd. It's available in black, blue, red and- for the first time in the HyperX line -white, with a black PCB. So your rig can reflect your style and you can show it off with pride - without spending a lot, since FURY is affordably priced. It's 100-percent tested and LAN-ready plus it's backed by a lifetime warranty and technical support.
HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Align the memory module key(s) along with the memory socket keys(s) for proper installation
2. Impact Master Century C Stand Kit with 40" Riser, Grip Head & Arm - Chrome, 10.75'
Feature
Detachable Base | Twist & Release Locking Legs40" Riser | Stand Load Capacity: 22 lb
40" Grip Arm with Attached 2.5" Head
2.5" Grip Head | 5/8" Top Stud
In The Box: Turtle Base C-Stand - 10.75' (Chrome), 40" Extension Grip Arm (Silver), Grip Head for Lights and Accessories - 2.5" Diameter (Chrome), 1 Year Manufacturer's Warranty
Description
The Impact Master Century C Stand Kit (10.75') is comprised of a C-stand, 2.5" grip head and 40" extension arm. The stand features a patented locking mechanism that allows the legs to swing out and lock into place for easy setup and collapse flat for storage. The included extension grip arm fits neatly into the stand's removable 2.5" grip head, allowing you to offset the stand and cantilever flags, gobos or lights out of the way of the action. The stand has a low center of gravity which allows mounting of heavy equipment without tipping. The legs are perfectly shaped for saddlebag-type sandbags. The kit is also often used as a short boom.The leg design provides a very low center of gravity, and makes it easy to bury in the soil or sand, or accept sandbags for extra stability.
Fold-away, twist and release locking legs.
Durable finish resists all weather conditions.
Innovative design on the Century Stand base allows individual legs to be set at any angle, and can be positioned in locations not possible with classic stands
Ergonomic "T" shaped handles are "captive" -- they do not come off of the stand when unscrewed, preventing loss.
Each riser section has an external rubber gasket, which protects your equipment and fingers from sudden drops in stand elevation.
Minimum Height: 4.25' (1.3m)
Maximum Height: 10.75' (3.3m)
Closed Length: 4.25' (1.3m)
Footprint Diameter: 37" (94cm)
Weight: ~30 lbs (13.6 kg)
Maximum Load: 22 lbs (10 kg) as a stand
Attachment Size: 5/8 in male stud
Accepts Wheels: No
Air Cushioned: No
3. Neewer Pro 100% Metal Max Height 10ft/305cm Adjustable Reflector Stand with 4ft/120cm Holding Arm and 2 Pieces Grip Head for Photography Studio Video Reflector, Monolight and Other Equipment
Feature
Made of pure metal,giving it a longer service time and exceptional strength for heavy duty.Its height is adjustable,satisfying your various shooting needs.
Easily attach to other equipment with its knob and spiral screw.
Rubber padded,giving you a comfortable feeling and preventing it from sliding when you move.
Its sturdy 3 legs structure at the bottom ensures your equipments stable. Note:Stand only!the monolight is NOT included!
Description
Note:Stand only!the monolight is NOT included!Description:
Made of pure metal,giving it a longer service time and exceptional strength for heavy duty
Its height is adjustable,satisfying your various shooting needs
Easily attach to other equpment with its knob and spiral screw
Rubber padded,giving you a comfortable feeling and preventing it from sliding when you move it
Its sturdy 3 legs structure at the bottom ensures your equipments safe
Specification:
Material: Pure Metal
Center stand column Maximum height:10ft/120"/305cm
Center stand column Folded height: 4ft/47"/120cm
Extension arm length: 4ft/47"/120cm
Color:Silver
Segment:3
Package Contents:
1 x C stand Base
1 x 10ft/305cm Center stand column
1 x 4ft/120cm extension arm
2 x grip head
4. Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)
Feature
Mounts Lights / Accessories on C-Stands1-Year Limited Warranty
Description
The Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black) mounts lights, light modifiers, scrims, flags, cutters, and other lighting accessories onto C-stands or butterfly frames.When trying to get the perfect shot, you often have various lighting accessories such as flags, scrims and cutters set up around your subject. A grip head holds each in a precise position, making it a fairly common piece of equipment on most any set.
Wide compatibility with standard grip equipment; fits 5/8" baby-studs or stand top-studs
Diameter: 2.5" (6.35 cm)
Weight: 1.75 lbs (.8 kg)
5. Flashpoint 10' C (Century) Light Stand on Turtle Base Kit w/40" Grip Arm & 2 Gobo Heads and Baby Pin - Chrome
Feature
Folding Turtle Legs - Two Tier Rise Center Column - 2 Gobo/Grip/Knuckle Heads - 40" Steel Arm Dowel - Baby Pin - Flashpoint 1-Year USA WarrantyLegs swing lock into preset and custom positions
Durable chrome finished steel withstands harsh conditions.
Spring loaded buffer on each riser section with rubber gaskets
Stagger height 'Turtle Legs' allow for close nesting stands
Description
Flashpoint 10' C (Century) Stand Turtle Base Kit
C-Stand turtle base kit
The Flashpoint 10' Century C Stand Kit is a worthy carrier of the time honored C Stand tradition of secure and powerful light and modifier supports for cinema and still studios. The C Stand kit features a 10', two tier spring loaded riser column with a baby pin on top, removable turtle self locking base legs, 2 aluminum 3.0" grip heads and a 40" extension boom arm.
Flashpoint C Stand Features
- Legs swing lock into preset and custom positions
- Durable chrome finished steel withstands harsh conditions.
- Spring loaded buffer on each riser section with rubber gaskets
- Stagger height 'Turtle Legs' allow for close nesting stands
- Two Aluminum Gobo/Grip/Knuckle Heads with 4 channels for total dexterity
- Sure locking legs fold flat for storage and transport
- Baby Pin stud for angular mounts
6. Neewer Pro Stainless Steel Reflector C-Stand Adjustable 10 feet/3 Meters with 4 feet/1.2 Meters Holding Arm and 2 Pieces Grip Head for Photography Studio Video Reflector,Monolight and Others (3-Pack)
Feature
KIT INCLUDES: 3-Pack Reflector C-Stand with holding arm and grip heads; Adjustable center stand height ranges from 4 feet/1.2 meters to 10 feet/3.05 meters; Holding arm length: 4 feet/1.2 metersWIDE USE: Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment; Its solid locking capabilities ensure the safety of your lighting equipment when in use
EASY INSTALL: Easily attach to other equipment with its knob and spiral screw; Rubber pad gives you a comfortable feeling and prevents the stand from falling down when you move
STAINLESS STEEL: Light weight and durable service life; Supports heavy duty work; Sandbags can be placed on the legs to increase the base weight (Sandbag NOT included)
ULTRA-STABLE AND FOLDABLE: Its sturdy 3 legs structure at the bottom ensures your equipment stable; Can be folded for easy carrying and storing; Note: Monolight is not included
Description
Note:Monolight is not includedDescriptions:
Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment; Its solid locking capabilities ensure the safety of your lighting equipment when in use.
Sandbags can be placed on the legs to increase the base weight(Not included).
The light stand is made of lightweight metal making it strong for heavy duty work.
Its solid locking capabilities ensure the safety of your lighting equipment when in use.
Specifications:
Center Stand Maximum Height: 10 feet/3.05 meters
Center Stand Folded Height: 4 feet/1.2 meters
Boom Arm Length: 4 feet/1.2 meters
Material: Stainless Steel
Color: Silver
Package Contents:
3 x Center Stand
3 x Holding Arm
6 x Grip Head
7. Neewer Photo Studio Heavy Duty 10 feet/3 meters Adjustable C-Stand, 3.5 feet/1 meter Holding Arm, 2 Pieces Grip Head for Video Reflector, Monolight and Other Photographic Equipment (Black)
Feature
Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment; Its solid locking capabilities ensure the safety of your lighting equipment when in useAdjustable center stand height ranges from 4 feet/1.2 meters to 10 feet/3.05 meters; Holding arm length: 3.5 feet/1.07 meters
Easily attach to other equipment with its knob and spiral screw; This stand set is easy to assemble and use
Metal Construction: Light weight and durable service life; Supports heavy duty work; Sandbags can be placed on the legs to increase the base weight (not included)
Foldable and Portable; Its sturdy 3 legs structure at the bottom ensures your equipment stable; Easy to carry and store
Description
Descriptions:
Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment
Sandbags can be placed on the legs to increase the base weight(Not included).
The light stand is made of lightweight metal making it strong for heavy duty work.
Its solid locking capabilities ensure the safety of your lighting equipment when in use.
Specifications:
Center Stand Maximum Height: 10 feet/3.05 meters
Center Stand Folded Height: 4 feet/1.2 meters
Boom Arm Length: 3.5 feet/1.07 meters
Material: Steel
Color: Black
Package Contents:
1 x Center Stand
1 x Holding Arm
2 x Grip Head
8. Neewer 2 Pieces Heavy Duty Max Height 10 feet/3 meters Adjustable Light Stand with 4 feet/1.2 meters Holding Arm and Grip Head Kit for Studio Video Reflector,Monolight and Other Photographic Equipment
Feature
Kit includes: 2 pieces light stand, 2 pieces holding arm and 4 pieces grip heads; Adjustable center stand height ranges from 4 feet/1.2 meters to 10 feet/3.05 meters; Holding arm length: 4 feet/1.2 metersUsed for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment; Its solid locking capabilities ensure the safety of your lighting equipment when in use
Easily attach to other equipment with its knob and spiral screw; Rubber pad gives you a comfortable feeling and prevents the stand from falling down when you move
Metal Construction: Light weight and durable service life; Supports heavy duty work; Sandbags can be placed on the legs to increase the base weight (not included)
Foldable and Portable; Its sturdy 3 legs structure at the bottom ensures your equipment stable; Easy to carry and store; Note: Monolight is not included
Description
Note: Monolight is not included
Descriptions:
Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment; Its solid locking capabilities ensure the safety of your lighting equipment when in use.
Sandbags can be placed on the legs to increase the base weight(Not included).
The light stand is made of lightweight metal making it strong for heavy duty work.
Its solid locking capabilities ensure the safety of your lighting equipment when in use.
Specifications:
Center Stand Maximum Height: 10 feet/3.05 meters
Center Stand Folded Height: 4 feet/1.2 meters
Boom Arm Length: 4 feet/1.2 meters
Material: Stainless Steel
Color: Silver
Package Contents:
2 x Center Stand
2 x Holding Arm
4 x Grip Head
9. Impact Extension Grip Arm - 40"
Description
This is an extension arm for extra lift or reach. It can hold a small light head, a flag, gobo, or reflector.40 inches long. Chrome finish. Similar to Avenger D520.
10. Bayco KW-130 Cord Storage Reel with Center Spin Handle, 150-Feet
Feature
Durability and Safety tested for the toughest situationsDesigned in the USA with quality materials
Used in Tactical, Outdoor, Recreation levels
It is 13 inch, Orange, Cord Storage Reel
It is Heavy Duty Impact Resistant Plastic
Holds Up To 150 foot 16/3 SJT, 125 foot 14/3 SJT Or 100 foot 12/3 SJT Cord