Check expert advices for hobby mate charger?
When you want to find hobby mate charger, you may need to consider between many choices. Finding the best hobby mate charger is not an easy task. In this post, we create a very short list about top 10 the best hobby mate charger for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 hobby mate charger:
When you want to find hobby mate charger, you may need to consider between many choices. Finding the best hobby mate charger is not an easy task. In this post, we create a very short list about top 10 the best hobby mate charger for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 hobby mate charger:
Best hobby mate charger
1. HOBBYMATE Elite Lipo Battery Balance Charger 6A/80W W/AC Power Supply, Internal Resistance Meter, for LiHv Lipo Nimh Nicd Pb
Feature
+++ Full Features Rc Hobby Battery Charger with high power circuit,Max Charge power 80w, max charge current 6A.+++ Practical for variety of batteries: 1-6s Lilon/LiPo/LiFe/LiHV,1-15cell Nicd/NiMh, 2-20V PB battery, Smart Battery Phantom I,II,III.
+++ Multi-Function:Charge, Balancer, Discharge,Terminal Voltage Control,Lithium Battery capacity & voltage checking,Battery Internal Resistance checking,Lipo Storage mode, Data storage and loading, Lipo Meter, Digital DC Power.
+++ Maximum Safety:Charge Current limit,Capacity limit, Processing Time limit,Temperature Threshold,Delta-Peak Sensitivity
+++ 2 in 1 Charging cable with XT60 Plug and Deans Plug which suit for most batteries charging.AC Power suppy included, US Plug
Description
*Working Mode:-Lipo/Lilo/LiFe/LiHv: balance charge, charge,fast charger, storage, discharge.
-NiMH/NiCd: Charge, Discharge, Cycle.
-PB: Charge, Discharge.
*Maximum safty:
-Low Input Voltage setting
-Delta-Peak Sensitivity
-Capacity limit
-Processing Time limit
-Temperature Threshold
*Microprocessor controlled Delta-peak sensitivity.
*High-Power and high-performance circuit.
*Automatically identify the cells counts of lithium battery section.
*Internal Resistance Checking,Let you know when a cell is going bad.
*Support LiHV battery and smart battery Phantom I,II,III.
*Terminal Voltage Control.(TVC)
User is able to adjust the end charge voltage per cell, and set a voltage which is kinder to the batteries as his will.
*individual cell voltage Monitoring and Individual cell balancing.
*Data storage and loading(Store up to 20 packs in memory)
*Digital Power
Specification:
* Input: DC11.0-18.0 Volt / AC to DC adapter (DC11.0-18.0V/ 6A)
* Max.charge power 80W
* Max.discharge power 10W
* Charge Current Range: 0.1-6.0A
* Discharge current range:0.1-2.0A
* Current drain for balancing: 400mAH/cell
* LiIon/LiPo/LiFe/ LiHV cells:1-6 cells
* NiCd/NiMH cells: 1-15cells
* Pb battery voltage: 2~20v
* Smart Battery: I II III.
* Net Weight: 220g
* Dimensions: 135x86x27mm
Package include:
1 x Hobbymate Elite Charger
1 x Charging cable
1 x Universal crocodile clip
Doesn't include the parallel charge board shown in the picture
2. OVONIC 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-motor Hobby DIY Parts
Feature
Specification: Material: Lithium polymer; Battery voltage: 14.4V; Cell: 4S; Cell voltage: 3.7~4.2V; Capacity: 1550mAh; Discharge: 100C; Discharge plug: XT60Dimension: 2.7*1.26*1.4inch (69*32*36MM); Net weight: 6.79oz/pc(192g)
Application: Nemesis 240 Mini, Tweaker 180 Micro Quad, LRC Freestyle V1(270-296), MXP180 FPV Quadcopter, Danaus, Vortex, FLIP FPV 250S MINI,FLIP FPV 260H MINI), drone and FPV (Only if the voltage, dimension and the plug match, then it will fit)
What You Get: Ovonic 4s 14.8V 1550mAh 100C XT60 Plug lipo battery
Voltage Note: Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using
Description
When you want a powerful battery pack that you can depend on even when you push it to its limits, this Ovonic 100C 4S 1550mAh 14.8V LiPo Battery with XT60 Plug is for you.Specification:
Brand: Ovonic
Chemistry: Li-polymer
Cell Number: 4S
Voltage(V): 14.8V
Capacity(mAh): 1550mAh
Discharge Rate: 100C
Charge Plug: JST-XH
Discharge Plug: XT60 Connector
Net Weight(dev.20g): 192g
Battery Dimension: 69x32x36mm
Compatible For:
Specially designed for Nemesis 240 Mini, Tweaker 180 Micro Quad, LRC Freestyle V1(270-296), MXP180 FPV Quadcopter, Danaus, Vortex, FLIP FPV 250S MINI,FLIP FPV 260H MINI), RC Airplane, RC Helicopter, RC Car, RC Truck, RC Boat, Remote Control, Drone, FPV.
Please Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battey won't hold a full charge or loss the charge very quickly in short time, please use Balance
Charger to charge and recycle several times first.
3. HOBBYMATE Lipo Battery Safe Bag Lipo Battery Guard Bag Fireproof Explosionproof Pouch Sack for Charge & Storage
Feature
HOBBYMATE Fireproof Lipo Charging Safe Bag, Lipo Storage Bag, Lip Battery Safe BagOuter surface was painted with Fire retardant coating, no glass fiber will annoy anymore
This flame retardant bag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage.
It is midium size to place multiple batteries at once (about 15-20 pcs 2200mah 3S lipo)
Size: (LxWxD): 20*15*15 cm Weight: 160g
Description
Features:For safer charging and storage of batteries
Fireproof and Explosionproof Warning:
Never leave charging battery unattended.
Always ensure the battery is on a non-flammable surface.
Ensure flap is sealed while charging
The Lipo safe bag is intended to reduce the chances of damaged in the event of a lipo fire.
Always remember to comply with li-poly charging and safety guidelines and never leave charging or damaged lipo batteries unattended
These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time.
The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.
Ideal as a LiPoly charging bag, but superb for encasing your battery when it is installed on your model if the untoward ever happens.
Specification :
Use: for safer charging and storage of batteries
Dimensions (LxWxD): 20*15*15 cm
Weight: 160g
Material: Textile Fiberglass Material with Fire retardant coating
Warning:
Never leave charging battery unattended.
Always ensure the battery is on a non-flammable surface.
Ensure flap is sealed while charging.
The Lipo safe bag is intended to reduce the chances of damaged in the event of a lipo fire.
Package Contents:
1 x Lipo Battery Safe Bag
4. OVONIC 14.8V 1300mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-motor Hobby DIY Parts
Feature
Specification: Material: Lithium polymer; Battery voltage: 14.4V; Cell: 4S; Cell voltage: 3.7~4.2V; Capacity: 1300mAh; Discharge: 100C; Discharge plug: XT60Dimension: 2.7*1.26*1.14nch (69*32*29MM); Net weight: 6.07oz/pc(172.6g)
Application: Nemesis 240 Mini, Tweaker 180 Micro Quad, LRC Freestyle V1(270-296), MXP180 FPV Quadcopter, Danaus, Vortex, FLIP FPV 250S MINI,FLIP FPV 260H MINI), drone and FPV (Only if the voltage, dimension and the plug match, then it will fit)
What You Get: Ovonic 4s 14.8V 1300mAh 100C XT60 Plug lipo battery
Voltage Note: Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using
Description
When you want a powerful battery pack that you can depend on even when you push it to its limits, this Ovonic 100C 4S 1300mAh 14.8V LiPo Battery with XT60 Plug is for you.Specification:
Brand: Ovonic
Chemistry: Li-polymer
Cell Number: 4S
Voltage: 14.8V
Capacity(mAh): 1300mAh
Discharge Rate : 100C
Charge Plug: JST-XH
Discharge Plug: XT60 Plug
Net Weight: 172g
Battery Dimension: 69x32x29mm
Compatible For: Nemesis 240 Mini, Tweaker 180 Micro Quad, LRC Freestyle V1(270-296), MXP180 FPV Quadcopter, Danaus, Vortex, FLIP FPV 250S MINI,FLIP FPV 260H MINI), RC Airplane, RC Helicopter, RC Car, RC Truck, RC Boat, Remote Control, Drone, FPV and other RC DIY Parts.
Please Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won't hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times first.
5. OVONIC 11.1V 2200mAh 3S 50C Lipo Battery with Deans Plug for RC Car Boat Truck Heli Airplane Quadcopter Helicopter Multi-motor Hobby DIY Parts
Feature
Specification: Material: Lithium polymer; Battery voltage: 11.1V; Cell: 3S; Cell voltage: 3.7~4.2V; Capacity: 2200mAh; Discharge: 50C; Discharge plug: Dean-style T connectorDimension: 4.17*1.3*0.9inch (106*33*23MM); Net weight: 6.6oz/pc(179g)
Application: RC airplane, RC helicopter, RC car, RC truck, RC boat, drone, FPV, Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250 (Only if the voltage, dimension and the plug match, then it will fit)
What You Get: Ovonic 3s 11.1V 2200mAh 50C dean-style T connector lipo battery
Voltage Note: Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using
Description
When you want a powerful battery pack that you can depend on even when you push it to its limits, this Ovonic 50C 3S 2200mAh 11.1V LiPo Battery with Deans Plug is for you.Specification:
Brand: Ovonic
Chemistry: Li-polymer
Cell Number: 3S
Voltage(V): 11.1V
Capacity(mAh): 2200mAh
Discharge Rate (C): 50C
Charge Plug: JST-XH
Discharge Plug: Deans Plug
Battery Dimension: 101x31x20mm
Net Weight: 190g
Compatible For:
RC Airplane, RC Helicopter, RC Car, RC Truck, RC Boat, Remote Control, Drone, FPV, Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250 and other RC DIY Parts.
Please Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won't hold a full charge or loss the charge very quickly in short time, please use Balance
Charger to charge and recycle several times first.
6. Amass 10 Pair XT90 XT-90 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery
Feature
Protected to avoid shorting and reverse polaritySuit for 90-120A current application
Used in RC Lipo Batteries Drones Airplanes Cars Vehicles
High Temperature Nylon Material
Two pcs heat shrink ,as a gift, is sent for free.
Description
Features:100% original Amass
10 Pairsof high quality XT90 Male and Female power connectors.
Ensures high-amp connection.
Used in RC battery and motor.
Package Included:
10PairsConnectors(10pcs male+10pcs female) +2pcs heat shrink
7. E-flite UMX Pitts S-1S BNF Basic with AS3X
Feature
Completely built and flight readyAS3X system provides great handling with amazing stability
Carbon fiber reinforced, lightweight foam construction
Steerable tail wheel for easy maneuvering on the ground
Four-channel, scale aerobatic maneuverability and control
Description
Key Features
- Completely built and flight ready
- AS3X system provides great handling with amazing stability
- Carbon fiber reinforced, lightweight foam construction
- Steerable tail wheel for easy maneuvering on the ground
- Four-channel, scale aerobatic maneuverability and control
- Easy-access, forward battery hatch with magnetic attachment
Needed To Complete
- 4+ channel DSM2- or DSMX-compatible transmitter
- 7.4V 2S 150-200mAh LiPo battery
- 2S LiPo battery charger
Overview
The E-flite UMX Pitts S-1S airplane makes it possible to enjoy the aerobatic icon of the century in your own back yard. Even more remarkable is how predictable this beautiful bipe handles. That's because its AS3X system has been custom-tuned to deliver stability when you need it and agility when you want it. The result is a scale aerobatic flight experience similar to that of an expertly tuned giant-scale model. And the best news of all is that you can enjoy it right away because there's no assembly required.
SCALE CHARACTER
The UMX Pitts S-1S is designed so that the distinctive scale character comes through without sacrificing the performance benefits of a light wing loading. Not only is detail like rib and stringer detents obvious, even the landing gear and tail wheel represent the celebrated features of an aerobatic platform many full-scale pilots still use to this day for aerobatic competition.
HIGH-OUTPUT BRUSHLESS POWER SYSTEM
The high-output brushless power system installed consists of an 180BL, 3000Kv outrunner motor and an E-flite 5 x 2.75 propeller. Together they provide ample thrust for realistic scale aerobatic performance
8. Youme Male TRX Traxxas to Female Deans T Plug Connector Adapter for RC LiPo Battery(2pcs/lot)
Feature
Use for convert battery with Deans to TRX on ESC / chargerPacking:2pcs x Deans T (Female) to TRX Traxxas (Male) connector adapter
No Wires = Less Resistance Than Standard Adapters
Save Time Soldering By Using These Easy To Use Connectors
Connection is very solid and secure,light weight and compact with excellent performance.
Description
Features:Male TRX Traxxas to Female Deans (T-Plug)
No Wires Connector: Male TRX Traxxas to Female Deans Adapter for Brushless Brushed Speed Control or Charger to LiPO NiMH NiCd Battery Pack 1s 2s 3s 4s 5s 6s
Category: No Wires / 2-Connector Adapter
Male Connector: Male TRX Traxxas Style Mates to the TRX connector on your Traxxas Battery Pack
Female Connector: Deans Style Mates to the Deans Connector on your Speed Control or Charger
Wire Length: N/A Less Resistance than Wire
Wire Guage: N/A Weight Saving Wireless
Used For: Convert Battery with TRX to Deans on Electronic Speed Control / Charger
Package List:
2pcs x Deans T (Female) to TRX Traxxas (Male) connector adapter (same as the picture)
About us
Youme Power is excited to deliver our lightest, power,best performing LiPo batteries and accessories to RC models fans from all over the world.Available in a wide variety of capacities and voltages.
PS:If you get the Male TRX Traxxas to Female Deans T Plug Adapter not as same as picture,please send picture to us. We will reply within 24 hours.Please give us a chance to make it right.
9. Ovonic 11.1V 2200mAh 3S 50C Lipo Battery with EC3 Plug for RC Car Boat Truck Heli Airplane Quadcopter Helicopter Multi-Motor Hobby DIY Parts
Feature
Specification: Material: Lithium polymer; Battery voltage: 11.1V; Cell: 3S; Cell voltage: 3.7~4.2V; Capacity: 2200mAh; Discharge: 50C; Discharge plug: EC3 connectorDimension: 4.17*1.3*0.9inch (106*33*23MM); Net weight: 6.6oz/pc(179g)
Application: RC airplane, RC helicopter, RC car, RC truck, RC boat, drone, FPV, Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250 (Only if the voltage, dimension and the plug match, then it will fit)
What You Get: Ovonic 3s 11.1V 2200mAh 50C EC3 connector lipo battery
Voltage Note: Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using
Description
When you want a powerful battery pack that you can depend on even when you push it to its limits, this Ovonic 50C 3S 2200mAh 11.1V LiPo Battery with Deans Plug is for you.Specification:
Brand: Ovonic
Chemistry: Li-polymer
Cell Number: 3S
Voltage(V): 11.1V
Capacity(mAh): 2200mAh
Discharge Rate (C): 50C
Charge Plug: JST-XH
Discharge Plug: EC3 Plug
Battery Dimension: 106x33x23mm
Net Weight: 179g
Compatible For:
RC Airplane, RC Helicopter, RC Car, RC Truck, RC Boat, Remote Control, Drone, FPV, Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250 and other RC DIY Parts.
Please Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won't hold a full charge or loss the charge very quickly in short time, please use Balance
Charger to charge and recycle several times first.
10. Genuine SKYRC iMAX B6AC V2 Dual Power Battery Charger (V2 Charger)
Feature
Genuine,Authentic,Original iMax B6AC V2 Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity.SKYRC B6AC V2 is the upgraded version for well-known IMAX B6AC with New features and functions.:Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade,also work as Lithium Battery Meter and Battery Internal Resistance Meter.
Maxinum Safety:With Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safer than V1.
SKYRC B6AC V2 is processor control charge/discharge station with battery management suitable for all current battery types, with integral equalizer for 6S LiPo,LiFe and LiIon batteries; maximum 6A charge current and maximum 50W charge power.
PC control & firmware upgradable,the software (PC Only) can be downloaded from SKYRC's website for free.
Description
Features:High 6.0Amp Charge Rate
Balance Charges & Balance Discharges LiPo, LiON, LiFe (1S-6S cells)
Storage Mode to Preserve Battery Longevity
Charges NiMh, NiCd (1-15 cells)
AUTO charge mode for NiMh
Charges Lead-Acid (2V-20V)
Many Safety Features: Capacity Cutoff, Time Limit Cutoff, Temperature Cutoff
10 Battery Memory Storage Settings
NiMh Cycling, Charge>Discharge, up to 5 times to refresh battery life
User definable charge rates from 0.1 amps to 6.0 Amps
50 Watt max output. Charge Amperage auto adjusts depending on battery voltage.
Balance Port Built In (Balances 2S-6S Batteries)
5 charging plugs
Menu Options:
LiPo, LiIo, LiFe
Balance Charge
Charge
Fast Charge
Storage Mode
Discharge
NiMh, NiCd
Charge
Auto Charge
Discharge w/ adjustable terminal voltage
Re-Peak
Cycle
Pb (Lead Acid)
Charge
Discharge
Battery Meter (Shows voltage of each cell in lithium pack, Total Voltage, Highest Voltage, Lowest Voltage)
Internal Resistance Tester (Shows each cells internal resistance, Total Resistance, Highest Resistance, Lowest Resistance)
System Settings
Safety Timer
mAh Capacity Cutoff
Temp Cutoff (Requires optional Temp Probe.)
Temperature Units
Rest Time
NiMh & NiCd Sensitivity
Key Beep & Buzzer
Input Power Low Voltage Cutoff
Load Factory Settings
Version
Serial Number