Check expert advices for arduino zumo?
When you looking for arduino zumo, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable arduino zumo is not an easy task. In this post, we show you how to find the right arduino zumo along with our top-rated reviews. Please check out our suggestions to find the best arduino zumo for you.
When you looking for arduino zumo, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable arduino zumo is not an easy task. In this post, we show you how to find the right arduino zumo along with our top-rated reviews. Please check out our suggestions to find the best arduino zumo for you.
Best arduino zumo
1. Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors) by Pololu
Feature
This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such as an A-Star 32U4 Prime) as its main controller.It uses two 75:1 HP micro metal gearmotors to drive the treads, providing plenty of torque and a top speed of approximately 2 feet per second (60 cm/s).
The Zumo robot includes a 0.036"-thick laser-cut stainless steel sumo blade mounted to the front of the chassis for pushing around objects like other robots.
The Zumo robot has a reflectance sensor array mounted along the front edge of the Zumo (behind the sumo blade) allows the Zumo to detect features on the ground in front of it, such as lines for following or edges for avoiding.
Required Accessories (Not Included): Arduino or compatible control board (Arduino Uno, Leonardo, NOT COMPATIBLE with Mega or Due). Four AA batteries (Alkaline or NiMH).
Description
Integrated 75:1 HP micro metal gearmotors that offer a good blend of speed (up to 2 feet per second), power, and control. Mounted array of six IR reflectance sensors that allows the Zumo to detect contrasts in reflectivity directly beneath its blade, which can be used for following lines or detecting edges (e.g. the white outer area of a sumo ring or the edge of a table). Integrated DRV8835 dual motor drivers capable of delivering enough current for the Zumo's two high-power gearmotors. Piezo buzzer for playing simple sounds and music. The buzzer is controlled by one of the Arduino's PWM outputs, so tones can be generated in the background without taking up a lot of processing power.2. Pololu Genuine Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors) (Item: 2510)
Feature
The Zumo robot for Arduino is an Arduino-controllable tracked robot platform that is less than 10cm10cm-small enough to qualify for Mini Sumot measures less than 10cm on each side and weighs approximately 300g with an Arduino Uno and batteries
so it is both small enough and light enough to qualify for Mini-Sumo competitions
Description
The Zumo robot for Arduino is an Arduino-controllable tracked robot platform that is less than 10cm10cm-small enough to qualify for Mini Sumo. It includes two micro metal gearmotors coupled to a pair of silicone tracks, a stainless steel bulldozer-style blade, an array of six infrared reflectance sensors for line following or edge detection, a buzzer for simple sounds and music, a 3-axis accelerometer, magnetometer, and gyro for detecting impacts and tracking orientation. Just add 4 AA batteries and an Arduino (or compatible controller) and you are ready to push! No soldering or assembly is required.
3. Pololu Genuine Zumo Robot Kit for Arduino, v1.2 (No Motors) (Item: 2509)
Feature
consists of aZumo Shield for Arduino, v1.2, aZumo chassis kit, and aZumo bladeYou will also need a pair ofmicro metal gearmotors, fourAA batteries, and anA-Star 32U4 PrimeorArduinoto complete your Zumo robot (motors, batteries, and Arduino sold separately)
Description
This kit contains most of the parts you need to build an Arduino-controlled Zumo robot. It consists of aZumo Shield for Arduino, v1.2, aZumo chassis kit, and aZumo blade. You will also need a pair ofmicro metal gearmotors, fourAA batteries, and anA-Star 32U4 PrimeorArduinoto complete your Zumo robot (motors, batteries, and Arduino sold separately). This product is akit; assembly (including soldering) is required
4. Pololu Genuine Zumo Shield for Arduino, v1.2 (Item: 2508)
Feature
The Zumo Shield is designed specifically to be a convenient interface between aZumo chassisand anA-Star 32U4 Prime,Arduino Uno, orArduino LeonardoDescription
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembledZumo chassis, connecting directly to the chassis's battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer, compass, and gyroscope. The shield boosts the battery voltage to power the Arduino, and it breaks out the Arduino I/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection5. 4WD Robot Chassis Kit with 4 TT Motor for Arduino/Raspberry Pi
Feature
Smart 4WD robot car chassis with 4 TT DC Gear Motor, horsepower fullness, Operating voltage: 3V - 12V.DC Motor Reduction Ratio: 1:48 (3V Motor No-load speed 125RPM).
Robot chassis kit made of PCB material, Size:256*150*2MM, Maximum Load 500g.
With many circuit mounting holes, users can add some micro-controller (such as Arduino/Raspberry Pi) and sensor modules to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
This 4WD robot car chassis convenient installation, firm and reliable.
6. Pololu Genuine Zumo 32U4 Robot (Assembled with 100:1 HP Motors) (Item: 3127)
Feature
It measures less than 10 cm on each side and weighs approximately 275g with batteriesThis version of the Zumo 32U4 robot (item #3127) ships fully assembled
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU. It includes two100:1 HPmicro metal gearmotors along with integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors for detecting objects, and a full IMU for detecting impacts and tracking orientation. The low-profile robot is less than 10cm10cm-small enough to qualify for Mini Sumo. No soldering or assembly is required; just add 4AA batteriesand aUSB cableand your Zumo is ready for programming.
7. Zumo Robot winning Mini Sumo Robot Body for Arduino Compatible Microcontroller
Feature
At up to 2 feet per second, this Zumo Robot is fast! With powerful 75:1 HP micro metal gearbox motors, high traction silicon tank-like tracks and a bulldozer-style blade, this tiny bot has the big muscle to push competitors out of the way!The Zumo Robot includes powerful micro metal motors to help you win at Mini Sumo. There are six infrared reflectance sensors to perform line and edge detection, a triple access accelerometer to detect collisions and a compass to assist with navigation.
The Zumo Robot is a robot body that attaches to an Arduino or compatible microcontroller to create a full Mini Sumo compliant robot. It attaches to your favorite Arduino just like a shield.
8. Pololu Genuine Zumo 32U4 Robot (Assembled with 50:1 HP Motors) (Item: 3125)
Feature
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCUIt includes two50:1 HPmicro metal gearmotors along with integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors for detecting objects, and a full IMU for detecting impacts and tracking orientation
The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot. It measures less than 10 cm on each side and weighs approximately 275g with batteries
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU. It includes two50:1 HPmicro metal gearmotors along with integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors for detecting objects, and a full IMU for detecting impacts and tracking orientation. The low-profile robot is less than 10cm10cm-small enough to qualify for Mini Sumo. No soldering or assembly is required; just add 4AA batteriesand aUSB cableand your Zumo is ready for programming.
9. Pololu Genuine Zumo 32U4 Robot Kit (No Motors) (Item: 3124)
Feature
The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot.It measures less than 10 cm on each side and weighs approximately 275g with batteries (170g without), so it is both small enough and light enough to qualify for Mini-Sumo competitions
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU, and this kit contains most of the parts you need to build one-all you need to add are a pair ofmicro metal gearmotorsand fourAA batteries. It includes integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors, and a full IMU. The assembled robot is less than 10cm10cm-small enough to qualify for Mini Sumo.This product is a kit; assembly (including soldering) is required.10. Zumo Chassis Kit (No Motors)/It Can Be Used As A Arduino (Or Compatible Device) As Its Main Controller
Feature
Fully assembled, the Zumo chassis is 98 mm wide, 86 mm long, and 39 mm high, with approximately 5 mm of ground clearance.Since each side is smaller than 10 cm, this chassis meets Mini-Sumo size
The front screws used to mount the acrylic plate to the chassis can also be used to mount a front scoop that can extend up to 14 mm before exceeding the Mini Sumo limits
The assembled Zumo chassis weighs approximately 210 g with motors and batteries