10 best smartthings light sensor for 2022
It’s not that easy to choose the right smartthings light sensor since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top smartthings light sensor on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best smartthings light sensor on the marketbut dont skip to the end!
It’s not that easy to choose the right smartthings light sensor since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top smartthings light sensor on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best smartthings light sensor on the marketbut dont skip to the end!
Best smartthings light sensor
1. SAMSUNG GP-U999SJVLGDA 3rd Generation SmartThings Hub, White
Feature
Connectivity: Wirelessly connect and control a wide range of compatible smart devices from 40+ partner brands, including voice assistants, lights & switches, speakers, cameras, sensors and moreHome Automation: Teach the hub your Good Morning, Goodbye, Goodnight, and other routines to automatically turn devices on or off throughout the day
24/7 Monitoring: Receive app alerts from connected devices when there's unexpected activity in your home.Material: Plastic
Voice Controls: Use voice commands to control connected devices using SmartThings and the Google Assistant
Improved DIY Solution: Improved guided onboarding for easier setup. Hub connects with Wi-Fi so does not need to be connected to an Ethernet cable
Compatible with previous versions of SmartThings Sensors and Outlets
Download new SmartThings (Samsung Connect) app for initial set-up. (Tip: You can still use SmartThings Classic app once initial set up is completed)
Requires Android (6.0 or later) or iOS (11.0 or later)
Product not supported outside U.S
Compatibility: Works with Google, Alexa, SmartThings, and ZigBee communication protocols
Description
Your smart home needs a brain, so get started with a SmartThings Hub. The Samsung SmartThings Hub works with a wide range of smart devices and allows you to control them from the free SmartThings App, Google Assistant, or Alexa. Receive notifications or alerts about what's happening in and around your home and remotely control your home's security, energy usage, and lighting.
You can add as many additional SmartThings sensors or other popular Z-Wave, ZigBee, or Internet-connected products to enhance your connected home. Works with smart devices from the following brands: Philips Hue, Ring, Arlo, Ecobee, Honeywell, Bose and more. (Not compatible with NEST, Sonos, D-Link, and Blink devices.) Look for the Works with SmartThings logo next time youre buying a connected device for your home, or visit SmartThings website to see the full list of compatible devices.
Requires an internet-connected WiFi router plus the free SmartThings app for Android (6.0 or later) or iOS (11.0 or later). Connected devices sold separately. Works in the US and Canada.
Includes: ethernet cable and power supply, quick-start guide, and health and safety guide. 1 year Samsung SmartThings limited warranty.
Technical Details:
. Power: In-wall power adapter.
. Communication Protocol: Zigbee, Z-Wave, and WiFi
. Range: 50-130 feet depending on your homes construction.
. Operating Temperature: 32-104F.
. Product not supported outside U.S.
. Download new smartphone (Samsung connect) app for initial set-up. (Tip: you can still use smartphone classic app Once initial set up is completed)
2. Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Feature
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.2 year battery life
Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight.
Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera.
Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6s accuracy varies as little as 0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. Its built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. SPECIFICATIONS: Motion Sensor : 16 feet, and 120 field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77F; Temperature Sensor : 14F (-10C) ~ 140F (60C), accuracy: +/- 32.9F (0.5C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4F (-20C) ~ 140F (40C); Storing Temperature: -40F (-40C) ~ 176F (80C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.6 oz3. Lutron Maestro Motion Sensor Switch | No Neutral Required, 150W LED, Single Pole | MS-OPS2-WH, White
Feature
Motion Sensor Switch automatically turns lights ON and OFFDetects fine motion 2-3 times better than competition with up to 900 square feet of coverage
Easily replaces existing switches in all homes - no neutral required and simple button press setup
Works with all bulb types: 250 Watt incandescent, halogen, ELV; 200 Watt MLV; 150 Watt LED/CFL; 2 amp ballasts
This single-pole switch is recommended for smaller rooms such as kitches, closets, and laundry rooms
Coordinating Wall Plate sold seperately (CW-1-WH)
Description
Let Lutron Maestro occupancy sensing switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor Features xct sensing technology which detects minor motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids' rooms and never worry about lights being left on by mistake. Maestro sensors Works with any Bulb type, including cfls and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor. Click on "watch the demo" under the product image to learn how to customize the settings of your sensor and for other helpful videos.4. GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931
Feature
ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately)
Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
Multiple Operation Modes: Occupancy - auto ON/auto OFF, Vacancy - manual ON/auto OFF, Manual - manual ON/OFF. 3 Sensitivity Levels - low, medium, high
Requires in-wall installation with hard-wired connections - Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
Description
Set your life in motion with the Z-Wave plus in-wall smart motion switch. This energy-efficient sensor works with your homes gateway to wirelessly trigger scenes and send alerts to your smartphone or tablet whenever motion is has turned lights on or off.* three different modes offer the best lighting option for you: occupancy, vacancy and manual. In occupancy mode, the lights will automatically turn on when you enter the room and automatically turn off Once youve left (customizable between 5 seconds and 30 minutes). in vacancy mode, the lights are turned on manually and will turn off automatically after a preset amount of time. In manual mode, the lights will function as a normal light switch and manually turn on and off. Along with conveniently saving you time and energy costs, the smart motion switch can replace any existing light switch in your home, and can be used in 3- and 4-way applications. You may also coordinate the switch with your household decor with the included white and light almond buttons. Experience the comfort of automation in your life when you come home to the Z-Wave plus in wall smart motion switch. *Functions may vary depending on gateway or controller.5. Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)
Feature
4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.NEW IMPROVED VERSION: The included CR123A battery makes the sensor lasts much longer than the previous version. Updated motion detection allows you to get even quicker activity reports.
CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes (your hub needs to support advanced parameter input).
SECURITY FIRST: This sensor is equipped with bank-grade AES signal encryption. It's Z-Wave Plus certified to ensure it complies with the highest industry standards.
WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Almond (Securify), HomeSeer, Home Assistant, Hubitat, SmartThings Hub with custom device handler (contact seller for instructions), VeraEdge, VeraLite (running under UI7), and VeraPlus.
Description
- NOTE: This sensor is supported by open Z-Wave systems ONLY. It will not work with Wink or Z-Wave alarm panels.
- Model Number: ZSE40 VER. 2.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 1 CR123A battery (included)
- Z-Wave Range: Up to 100 feet line of sight
- Operating Temperature: 5-104 F
- Installation and Use: Indoor only
- Dimensions: 2.25" x 2.25" x 1"
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
Please contact seller if you're not sure your hub is compatible.
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to get readings from this sensor from Alexa.
Alexa-compatible Z-Wave hubs include:
6. Samsung SmartThings GP-U999SJVLAAA Door & Window Multipurpose Sensor, White, 1 Count (Pack of 1)
Feature
Versatile Monitoring: All-in-one open/close, vibration, orientation, angle (tilt), and temperature sensor for multipurpose functionality24/7 Monitoring: Receive instant phone alerts if a door, window, cabinet or drawer opens unexpectedly
Stay Safe: Get a notification if you forgot to close your doors or windows to ensure your home stays safe
Requirements: Must have SmartThings App and SmartThings Hub or compatible device with SmartThings Hub functionality (connected devices sold separately)
Compatibility: Works with Google, Amazon Alexa, SmartThings, and Zigbee communication protocols
Description
The sleek multipurpose sensor detects open/close, vibration, orientation, and temperature allowing you to monitor several areas of your home. Place the multipurpose sensor anywhere to detect when drawers have been opened or closed to keep valuables safe. Receive instant alerts if someone is trying to rattle your door or open your window and detect abnormal temperature readings all with one little device.Recommended Placing - Place the hub in an open area well away from other devices transmitting and receiving 2.4GHz signals (like WIFI routers).
If the signal needs to penetrate walls or floors, sensors should be placed within 30 ft of the hub, or a device that can act like a ZigBee repeater (such as a SmartThings Outlet) should be placed between the two devices to boost the range.
Requires a SmartThings Hub or compatible device with SmartThings Hub functionality and SmartThings App. Free SmartThings app requires Android (6.0 or later) or iOS (10.0 or later). This device is compatible with the SmartThings ADT Security Hub, but is not compatible with ADT professional monitoring services.
Included: battery, mounting pads, screws, bracket, quick-start guide, and health and safety guide. 1 year Samsung SmartThings limited warranty.
Technical Details:
Power: 1 x CR-2450 battery
Communication Protocol: Zigbee
Range: 50-130 feet depending on your homes construction
Operating Temperature: 32 to 104F
Intended for indoor use only
*Compatible with previous versions of SmartThings Hubs including F-HUB-US-2, F-H-ETH-001, ET-WV520KWEGUS, ET-WV520BWEGUS, ET-WV530BWEGUS, and F-USB-US-M-1
7. Aqara Temperature and Humidity Sensor, REQUIRES AQARA HUB, Zigbee, for Remote Monitoring and Home Automation, Wireless Thermometer Hygrometer, Compatible with Apple HomeKit, Alexa, Works with IFTTT
Feature
NOTESAn Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. The Aqara M2 or M1S Hub can connect up to 128 devices(*use of a repeater such as the Aqara Smart Plug or Aqara Smart Wall Switch(With Neutral) is required).REMOTE MONITORINGWhen the room temperature reaches above or below a certain threshold, the Aqara Temperature and Humidity Sensor can send a push alert to your phone or trigger the Aqara Hub night light.
HOME AUTOMATIONThe Aqara Temperature and Humidity Sensor can control other connected devices such as Aqara Smart Plug to ensure that your fan or humidifier maintains a constant level of comfort for you and your family.
ACCURATE MEASUREMENTUtilizes high-quality sensor from the industry-leading manufacturer, Sensirion.
BUILT-IN AIR PRESSURE SENSORMonitors the ambient air pressure in the room. In addition, If you have any questions, please feel free to contact us.
8. Samsung SmartThings GP-U999SJVLBAA Magnetic Motion Sensor, White, 1 Count (Pack of 1)
Feature
24/7 Monitoring: Receive alerts when theres unexpected movement in your homeHome Automation: Set devices to automatically turn on or off as people come and go to minimize energy usage
Detection Ready: Adjust the sensor with the quick tilt magnetic ball mount to capture motion up to 15 feet with 120 degree view range
Requirements: Must have SmartThings App and SmartThings Hub or compatible device with SmartThings Hub functionality (connected devices sold separately)
Compatibility: Works with Google, Alexa, SmartThings, and Z-Wave and ZigBee communication protocols
9. Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered
Feature
3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50C / 14~122C with accracy of 1C, 0~30000 LUX with 3% accracy.Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box.
Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration.
Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more.
Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128.
10. Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29
Feature
OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight.EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet.
COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo).
SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mind.
SUPPORT: Questions or issues? Zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Just ask!