Best petg 1.75 mm for 2019
If you looking for petg 1.75 mm then you are right place. We are searching for the best petg 1.75 mm on the market and analyze these products to provide you the best choice.
If you looking for petg 1.75 mm then you are right place. We are searching for the best petg 1.75 mm on the market and analyze these products to provide you the best choice.
Best petg 1.75 mm
1. AmazonBasics PETG 3D Printer Filament, 1.75mm, 5 Assorted Colors, 1 kg per Spool, 5 Spools
Feature
3D printer filament with 1.75 mm diameter + / - .05 mm; designed to fit most common 3D printers (check spool size for compatibility); 5 assorted colors: Black, Red, Gray, Blue, and White; 1 kg per spool (5 spools)Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy type finish
Spool's built-in gauge shows percentage of material remaining and approximate length remaining
Engineered to reduce jamming; resealable storage bag included to protect filament between use
Measures 9.8 by 9.3 by 16 inches (LxWxH); weighs 11 pounds; backed by an AmazonBasics 1-year limited warranty
Description
An Amazon Brand.2. eSUN 3D 1.75mm PETG Black Filament 1kg (2.2lb), PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1.75mm Solid Opaque Black
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 235C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETGExtrusion Temperature Range: 235_ to 250_
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
3. 3D Solutech Natural Clear 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG)
Feature
1.75mm Natural Clear PETG filamentFor common 3D printers such as MakerBot, RepRap, Afinia, UP, Mendel, flash forge, Sol doodle 2, Printout LC, Maker Gear M2 and etc
Backed by our 100% SATISFACTION GUARANTEE
Temperature range is 200C - 220C
Made in the USA
Description
Ultra smooth technology Our ultra smooth technology includes filaments capable of beautiful and smooth extraction to help build even the most delicate objects. Vacuum sealed We use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility Our filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback. 100% USA 100% of the materials used in our products are grown and made in the USA. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3d printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kinks or breaks. Check out our store for the latest colors and materials for your 3d printer. Package includes: 1 x 1.75mm Natural Clear PETG Filament (2.2LBS) 1 x Filament clip.4. YOYI 3D Printer Filament,PETG Filament 1.75mm 2.2lbs(1kg) Spool, Dimensional Accuracy +/- 0.03 mm,100% Europe Raw Material (Transparent Red)
5. HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
Feature
1KG (approximately 2.2 lbs) SpoolPETG (Polyethylene Terephthalate Glycol-Modified) 3D Printer Filament Vacuumed Sealed With Desiccant
Recommended Extrusion/Nozzle Temperature 230C - 260C (446F - 500F)
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.25"
Description
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Perfect for strength and flexibility, HATCHBOXs PETG, or Polyethylene Terephthalate Glycol-modified filament, is a great alternative to ABS or PLA filaments. PETG filaments can be processed over a wider processing range than conventional PET filaments and also offer a good combination of properties such as toughness, easy bed adhesion, and stiffness. The 3D printed object will have a glossy type finish with PETG. Why we love it: Hydrophobic Easy adhesion to a number of surfaces Environmentally safe No heating bed required.6. Stronghero3D 3D Printing PETG Filament Blue 1.75mm Net Weight 1KG Accuracy +/-0.05mm
Feature
Solid orange smooth, shiny color, it can be printed up to about 60mm / s.1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box.
Recommended Printing Temperature: 230-250C(446-482). 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and alkalis and Does not absorb water.
We make each roll and each point been inspection qualify,hard quality control
Description
PETG (Polyethylene terephthalate glycol-modified)3D Printer filament is a rigid, tough, high performance material offering excellent clarity, light transmission and high gloss. PETG 3D Printer filament is stronger than PET, and is about as stiff as PLA low smell, health and savety NO warp,NO jam,NO burbles,No cracking PETG filament has good load capacity printing of ABS and PLA filament, and it's a perfect alternative.
we make each roll and each point been inspection qualify,hard quality control 1 KG (approximately 2.20 lbs) Spool ,1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) PETG 3d Printer filament has high tensile strength, impact resistance and is more durable than PLA. It doesn't warp and is recyclable making it better for the environment. A new light plastic.
Product Features 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Vacuumed Sealed With Desiccant Recommended Extrusion/Nozzle Temperature 250-275C(482-527) Heat bed 100 C (220) Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.95" Length: 330m
Quality You Can Trust Strong Toughness: Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, Due to its high layer adhesion and resistance, PETG is optimally suited for manufacturing mechanically stressed components. Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc. Healthy: All of products have passed the RoHS CEREACH standard..
7. 3D Solutech See Through Blue 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG) - PETG175BLU
Feature
1.75mm See Through Blue PETG filamentFor common 3D printers such as MakerBot, RepRap, Afinia, UP, Mendel, flash forge, Sol doodle 2, Printout LC, Maker Gear M2 and etc
Backed by our 100% SATISFACTION GUARANTEE
Temperature range is 200C - 220C
Made in the USA
Description
Ultra smooth technology Our ultra smooth technology includes filaments capable of beautiful and smooth extraction to help build even the most delicate objects. Vacuum sealed We use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility Our filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback. 100% USA 100% of the materials used in our products are grown and made in the USA. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3d printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kinks or breaks. Check out our store for the latest colors and materials for your 3d printer. Package includes: 1 x 1.75mm See Through Blue PETG Filament (2.2LBS) 1 x Filament clip.8. eSUN 3D 1.75mm PETG Green Filament 1kg (2.2lb), PETG 3D Printer Filament, Semi-Transparent 1.75mm Green
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETGExtrusion Temperature Range: 230_ to 250_
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
9. YOYI PETG 3D Printer Filament 1.75mm, Diameter Tolerance +/- 0.03 mm, 1 KG Spool, 1.75 mm PETG filament for 3D printer (green)
Feature
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).Fast clean pressure, tested to 120mm / s.So that it can only be printed up to about 60mm / s.1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box.
Recommended Printing Temperature: 250-275C(482-527). Melting Point: 250C(482).
PETG filament are perfect printed by Titan/V6/Volcano 3D printer,Prusa MK2/S to MK3 3D printer,Creality CR-10,E3D V6 3D printer,Custom CoreXY 3D printer,Monoprice Maker Ultimate 3D Printer MK11 Ect.
Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and alkalis and Does not absorb water.
Description
YOYI PETG (Polyethylene terephthalate glycol-modified)3D Printer filament is a rigid, tough, high performance material offering excellent clarity, light transmission and high gloss. PETG 3D Printer filament is stronger than PET, and is about as stiff as PLA.
1. PETG filament has good load capacity printing of ABS and PLA filament, and it's a perfect alternative.
2.PETG 3d Printer filament has high tensile strength, impact resistance and is more durable than PLA. It also has no odour which allows easy printing indoors. It doesn't warp and is recyclable making it better for the environment. A new light plastic.
3.It is ideal for most 3D printers (with print heads that are suitable for 250 ), and can be easily printed on most printing substrates, such as glass, Bluetape, crepe tape and Buildtak.
4.Due to its high layer adhesion and resistance, PETG is optimally suited for manufacturing mechanically stressed components.
5.Unlike PLA, PETG is highly resistant to temperatures at temperatures above 60 C.
10. 3D Solutech See Through Green 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG)
Feature
1.75Mm see through green petg filamentFor common 3D printers such as makerbot, RepRap, finial, up, Mendel, flash forge, sol doodle 2, printout lc, maker gear M2 and etc
Backed by our 100 percent satisfaction guarantee
Temperature range is 200c - 220c
Made in the usa