Top 10 lathe headstock for 2020
Shopping lathe headstock has never been easy. You may come many of website, read lathe headstock reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Shopping lathe headstock has never been easy. You may come many of website, read lathe headstock reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best lathe headstock
1. Hurricane Turning Tools, Lathe Headstock Spindle Adapter, Converts 3/4" x 10TPI to 1" x 8TPI
Feature
Female Thread Mount: 3/4" x 10 TPIMale Thread Mount: 1" x 8 TPI
Material: Steel
Description
Hurricane Standard Series Lathe Headstock Spindle Adapter for lathes with a 3/4" x 10 TPI spindle. This is a spindle adapter for use when you want to convert one spindle thread to another. Converts from 3/4" x 10 TPI to 1" x 8 TPI.
Features:- Female Thread Mount: 3/4" x 10 TPI
- Male Thread Mount: 1" x 8 TPI
- Material: Steel
Hurricane Turning Tools is a premium brand of tools and accessories meeting the needs of woodturners and woodworkers. Hurricane Tools include woodturning tools, wood lathe chucks and jaws, drill bits and Hurricane Abrasives. Hurricane products are made in the USA and throughout the world, balancing the need for both high performance and affordable products.
2. PSI Woodworking LA11418 Headstock Spindle Adapter (1-1/4-Inch-by-8tpi to 1-Inch-by-8tpi Chuck)
Feature
Adapts a spindle thread of 1-1/4-by-8 tpi to a 1-inch-by-8 tpi chuckMade of steel
Has flats to allow wrench to hold when tightening
Permits the use for different size accessories
Extends the spindle over 1-inch
3. PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
Feature
The PSI Super Center Crown compatible with headstocks with #2MT spindlesGet a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive
Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied
Ships in plastic production sleeves at 4.8-ounces
4.5-by-1.5-by-1.5-inches with 1-inch crown
4. PSI Woodworking LCENT4 Wood Lathe Drive Center 4pc Set, 2MT Mount
Feature
Includes (4) different Centers that mount on your lathe's headstock and tailstock with the #2 Morse Taper arbor; Comes in wooden storage caseLive tailstock Cup & Point Center
Dead headstock 1" Spur Center for standard spindles
Dead headstock 5/8" Spur Center for narrow spindles
Dead Hollow Center for drilling 5/16" through hole
5. PSI Woodworking Products LCENTSET 7-Piece Multi Spur Drive Center Set With A 1-Inch by 8 TPI Mount
Feature
Includes (3) 4-prong Spur Centers, (3) Multi-tooth Super Centers, (1) 1" x 8tpi threaded Center Carrier, and (1) set of Tightening LeversBoth center types come in 5/8", 1", and 1-1/2"
All centers have a spring loaded pin for easy mounting and removal of your work-piece
Thread the 1" x 8tpi Center Carrier onto your lathe's headstock spindle for easy insertion and removal of all the centers
Comes in wooden case for storage
6. PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT
Feature
1" Diameter with #2MTSharp spurs give a strong bite into wood work piece
Spring-loaded center point simplifies positioning of your spindle
Spring-loaded center point retracts when tailstock pressure is applied
Spring-loaded center point helps avoid splitting your work piece
7. HFS (R) Woodworking MT2 with 1-Inch Wood Lathe Drive Center
Feature
Compatible with headstocks with #2MT spindlesMore teeth give a better bite while providing equal pressure and a positive drive.
Spring loaded point: The spring under the center pin is very powerful.
Belongs to the outside transition woodworking top, middle top part with telescopic function.
Common serrated diameter 25.4MM (1 in.)
8. Hurricane Turning Tools, Lathe 4 Prong Drive Center, 5/8" Diameter, 2MT
Feature
4 prong drive center is the most common method of driving a workpiece between centers on the latheThe 5/8" diameter of the center provides a strong grip so you can turn your piece without slipping
Headstock Mount: #2 MT (Morse Taper)
Material: Steel
9. Hurricane Turning Tools, Lathe 4 Prong Drive Center, 1" Diameter, 2MT
Feature
4 prong drive center is the most common method of driving a workpiece between centers on the latheThe 1" diameter of the center provides a strong grip so you can turn your piece without slipping
Headstock Mount: #2 MT (Morse Taper)
Material: Steel
10. SHZOND Dividing Head Set 3 Jaw Lathe Chuck Dividing Head 5 Inch with Tailstock Dividing Plates for Milling Machine (5 inch dividing head)
Feature
This dividing head set includes headstock, 5" 3-jaw lathe chuck, tailstock, center&driving dog, threaded back plate & 3 dividing plates. 1:40 ratio.Headstock adjustable from 10 downward to 90 degree upward from the horizontal position
By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand
The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing
3 dividing plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers