Best helicopters diecast for 2019
If you looking for helicopters diecast then you are right place. We are searching for the best helicopters diecast on the market and analyze these products to provide you the best choice.
If you looking for helicopters diecast then you are right place. We are searching for the best helicopters diecast on the market and analyze these products to provide you the best choice.
Best helicopters diecast
1. Metal Die cast Helicopters - Assorted colors - 12pcs
Description
Metal Die Cast Helicopters-12 Pieces and Assorted Colors!2. Daron Worldwide Trading Postage Stamp UH-1 Huey MEDEVAC US Army Vehicle (1/87 Scale)
Feature
Die-cast metal with plastic baseRealistic artwork and historical accuracy
Excellent detail and great value
Description
Developed by Bell Helicopter, the Huey was nicknamed after the phonetic sound of its original designation, the HU-1 Iroquois. In 1962 the designation was changed to UH-1, but Huey remained and became so popular that Bell began casting the name on the helicopters anti-torque pedals. The Huey was developed in 1952 in order to meet the United States Armys requirement for a medical evacuation and utility helicopter. With its first flight on October 20, 1956, the Huey began arriving in Vietnam in 1963. Used for MEDEVAC, command and control, and air assault, Hueys became, more than any other aircraft, a symbol of the Vietnam War. The Hueys ability to carry patients inside the aircraft was a key element in the reduction of mortality and morbidity. Medical personnel could begin treatment during the flight to a field hospital, reducing the average delay until treatment to one hour, helping to reduce the mortality rate to 1 death per 100 casualties. With the unmistakable sound of its blades, the sound of an approaching Huey was said by those that served in Vietnam to be the sound of rescue, the sound of freedom and the sound of going home. This 1:87 scale Die-cast metal model is approximately 5 7/8 inches long with 5 1/2 inch rotor diameter. Tail rotor is 1 3/16 inches in diameter. Model's maximum length is 7" and maximum width is 5 1/2 inches. Comes with plastic display stand.3. BELL AH-1S Cobra diecast 1:72 helicopter model (Amercom HY-9)
Feature
Bell AH-1S Cobra diecast 1:72 helicopter modelDescription
This diecast model represents military light attack helicopter, developed in the 1960s. Started service with the U.S. military in the Vietnam War. Cobra can perform anti-armor, air cavalry and armed reconnaisance roles and can attack point targets with its anti-armou and anti-helicopter capabilities. Model packed in blister.4. Smart Novelty Metal Die Cast Helicopters in Assorted Colors - Set of 6 Helicopters
Feature
Excellent die cast set of 6 toy helicopters for kids in bright colors.Helicopters measure about 3.5" and come with spinnable propellers.
These diecast helicopters make a great gift, prize, or party favor.
Realistic looking toy helicopter is made of metal with plastic parts.
Each helicopter comes packaged in a nice box with a window display.
Description
Die cast helicopters come in a pack of 6 with bright assorted colors. These toy helicopters are made of diecast metal with plastic parts. Realistic looking toy helicopter measures approximately 3.5 inches long. It features spinnable propellers. Each die cast helicopter comes nicely packaged in window display box. Perfect to hand out as a gift, prize, or party favor.5. 20cm Diecast Metal Helicopter 1:64 Scale - 1 Picked At Random
Feature
This helicopter is available in 6 different colours.You will get one at random
Description
This helicopter is available in 6 different colours. You will get one at random. If you have any preference please send an email before you order.6. Italeri Brest 48133MH-60K Black HawkDie Cast Model 1: 100Scale
Feature
Metal and Plastic ModelIncludes custom stand base
1: 100Scale
Model size: 16cm.-Box Size: 23x 21cm x 6cm
Description
Collectible die cast metal model and custom plastic Includes base stand7. Sikorsky SH-60 Sea Hawk NAVY 1/60 Scale Diecast Metal Helicopter Model
Feature
Highly detailed die-cast metal ConstructionAccurate paint scheme and markings
No glue or paints required. Ready for display or play right out of the box
Approximately 9.5 inches in length.
Plastic stand included.
Description
The model from NewRay SH-60 SeaHawk (Sea Hawk) measures abut 9.5 inches in length. It is mostly made of metal. The plastic parts would be the wings, weapons and rotor blades. Both rotors can spin freely. The details are nice; the panels along the fuselage are very well defined and accurate. The wheels on the main landing gear can spin freely (so don't let it roll off a table). It has a sliding door on the right side that can open and close. If you look carefully through the door's window, you will see that there are seats and stations inside. A display stand is included where the model can be mounted. Printed on the display's base is info about the model, such as scale and official name of the particular model. These models are for display only, they are really not meant to be played with regularly. The box measures 13.75 inches long by 4.75 inches high by 4 inches deep. The Sikorsky SH-60/MH-60 Seahawk (or Sea Hawk) is a twin turboshaft engine, multi-mission United States Navy helicopter based on the United States Army UH-60 Black Hawkand a member of the Sikorsky S-70 family. The most significant airframe modification is a hinged tail to reduce its footprint aboard ships. The U.S. Navy uses the H-60 airframe under the model designations SH-60B, SH-60F, HH-60H, MH-60R, and MH-60S. Able to deploy aboard any air-capable frigate, destroyer,cruiser, fast combat support ship, amphibious assault ship, or aircraft carrier, the Seahawk can handle anti-submarine warfare (ASW), anti-surface warfare (ASUW), naval special warfare (NSW) insertion, search and rescue (SAR), combat search and rescue (CSAR),vertical replenishment (VERTREP), and medical evacuation (MEDEVAC). All Navy H-60s carry a rescue hoist for SAR/CSAR missions.8. Sikorsky HH-60 J (US Coastguard) Diecast Model Aircraft
Feature
Collector-quality diecast metal modelIncludes display stand
Doors open and propellor spins
1:60 scale
Measures approximately 10.5 inches long
Description
This 1:60 scale die-cast metal U.S. Coast Guard HH-60J Jayhawk helicopter measures 10.5 inches long and includes display stand. Limited Edition replica is individually serial numbered.9. InAir Diecast 3.5 Chinook Supply Helicopter,
Feature
Durable die-cast metalHighly detailed replica
Authentic markings
3.5 inches long
Description
This small die-cast metal replica of the CH-47 Chinook Supply Helicopter measures 3.5 inches long. Kids can use their imagination to create tactical flights, air defense operations, and ground-attacks! Great value!10. New-Ray Toys Inc. 26123 1/55 Bell AH-1Z Cobra
Feature
Collector quality diecast metal modelLimited production, models are serial numbered
Doors open and propeller spins
1:55 scale
Measures approximately 10.5 inches long