Best drafting chair cylinder replacement for 2019
Finding your suitable drafting chair cylinder replacement is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best drafting chair cylinder replacement including detail information and customer reviews. Let’s find out which is your favorite one.
Finding your suitable drafting chair cylinder replacement is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best drafting chair cylinder replacement including detail information and customer reviews. Let’s find out which is your favorite one.
Best drafting chair cylinder replacement
1. Replacement Drafting Stool Gas Lift Cylinder Pneumatic Shock - Full Stool Height - S6120
Feature
2" wide column diameter will fit most chair bases14.5" (315mm) black support stand pipe column height (larger size black tube)
10" (270mm) piston stroke with 28" (708mm) total overall extended length
Drafting stool height
Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools, including those purchased at office supply stores.
Description
This drafting stool height gas cylinder is meant as a replacement for damaged or worn out gas lifts on tall task chairs, drafting stools, etc. While this gas cylinder will fit the majority of these types of chairs and stools, it may not fit all. Please remove gas cylinder with care and measure to be sure. Minimal differences in measurements should not alter performance of lift when installed in chair.2. chairpartsonline Replacement Drafting Stool Gas Lift Cylinder Pneumatic Shock - Medium Stool Height - S6115
Feature
2" (50mm) wide x 12.4" (315mm) tall main support tube column will fit most chair bases (larger diameter black tube)8" piston stroke adjustment range (up & down)
22.25" (565mm) total overall extended length
Black
Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools, including those purchased at office supply stores.
Description
Works well for replacement of damaged or worn out gas lifts on tall task chairs, drafting chairs, stools, etc. While this tall gas cylinder will fit the majority of these types of chairs and stools, it will not fit all. ***Always remove gas cylinders with care and never heat or puncture. Please measure to be sure of the size you need as this cylinder is at least 4" taller at the lowest point than many desk-height cylinders. Minimal differences in height measurements should not alter performance of lift when installed in chair.3. Replacement Chrome Gas Lift Pneumatic Cylinder - Medium Drafting Stool Height - S6132
Feature
2" (50mm) wide x 12.4" (315mm) tall chrome support tube column (larger diameter chrome tube) will fit most chair and stool bases8" piston stroke adjustment range (up & down)
22.25" (565mm) total overall extended length
Chrome support column
Ideal to replace gas lift cylinders on most tall task chairs, drafting chairs, and stools, including those purchased at office supply stores.
Description
Works well for replacement of damaged or worn out gas lifts on tall task chairs, drafting chairs, stools, etc. While this tall gas cylinder will fit the majority of these types of chairs and stools, it will not fit all. ***Always remove gas cylinders with care and never heat or puncture. Please measure to be sure of the size you need. Minimal differences in height measurements should not alter performance of lift when installed in chair.4. Heavy Duty Drafting Stool Gas Lift Cylinder Pneumatic Shock - Full Stool Height Replacement - S6120-HD
Feature
Heavy Duty - Built to withstand more weight and pressure than standard gas cylinders.2" wide column diameter will fit most chair bases
10" (270mm) piston stroke with 28" (708mm) total overall extended length
14.5" (315mm) black support stand pipe column height (larger size black tube)
Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools, including those purchased at office supply stores.
Description
This drafting stool height gas cylinder is meant as a replacement for damaged or worn out gas lifts on tall task chairs, drafting stools, etc. While this gas cylinder will fit the majority of these types of chairs and stools, it may not fit all. Please remove gas cylinder with care and measure to be sure. Minimal differences in measurements should not alter performance of lift when installed in chair.5. Heavy Duty 8" Stroke Replacement Drafting Stool Gas Lift Cylinder Pneumatic Shock - Medium Stool Height - S6115-HD
Feature
Heavy Duty - Built to withstand more weight and pressure than standard gas cylinders2" (50mm) wide x 12.4" (315mm) tall main support tube column will fit most chair bases (larger diameter black tube)
8" piston stroke adjustment range (up & down)
22.25" (565mm) total overall extended length
Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools.
Description
Works well for replacement of damaged or worn out gas lifts on tall task chairs, drafting chairs, stools, etc. While this tall gas cylinder will fit the majority of these types of chairs and stools, it will not fit all. ***Always remove gas cylinders with care and never heat or puncture. Please measure to be sure of the size you need as this cylinder is at least 4" taller at the lowest point than many desk-height cylinders. Minimal differences in height measurements should not alter performance of lift when installed in chair.6. Drafting Stool Chair Gas Lifting Replacement Hydraulic Cylinder Pneumatic Shock Universal Size, Heavy Duty(400 lbs), 22 Inches(Stool Adjustment Range 7.85 inches). Chromed Color
Feature
Heavy duty (400 lbs capacity)22 Inches, adjustment range: 7.85 inch, higher than regular hydraulic lifting
Universal size, suitable for most stools, task chairs, office stools, computer chairs
Moves smooth and noiseless go up and down, 360 degree rotation
A plastic cap to secure the hydraulic on the top, please remove out the plastic cap when assembly.
Description
If your chair is unable to adjust up and down then you may be in need of a new Gas Lift Cylinder. FRNIAMC drafting stool chair gas lift cylinders are more heavy duty than standard chair gas lift cylinders. It is universal size is compatible with all for damaged or worn out gas lifts on office chairs, task chairs, executive chairs.7. Abacus Swivel Chair Parts (#1025TMHD) Big and Tall Man Heavy Duty Gas Cylinder Only
Feature
Better cylinders last longerOver 7" of adjustable travel
Black part is 2" +/- thick diameter. Chrome part is 1.1" + /-
Extra Tall Heavy Duty Cylinder for Heavy and Tall People. 350 LB Load
6 Month Defect Warranty
Description
Heavy Duty, Total extended height 21-1/8". Plus over 7" height adjustment. Includes 2"dia Black column with bearing kit Pre assembled. Fits virtually all Chairs.8. MySit 6" Long Stroke Office Chair Gas Lift Cylinder Pneumatic Shock Longest Heavy Duty Replacement for Tall Person (GasLift160x4_SNR)
Feature
6" piston stroke travel (up & down), Used to increase the office chair / stool seat height2" (50mm) wide outter tube diameter that will fit most chair bases, Standard Shaft Diameter - Fits 1.1" (28mm) Seat Plates,Mechanism interface.NOT FIT 40mm Diameter Base Hole.
18.3" (465mm) total overall extended length (from top to bottom)
Class 4 level, Top Quality Level, Heavy Duty Construction, Specialized for Heavy Person,BIFMA Plus Quality
Heavy Duty replacement for gas lift cylinders on many office chairs and executive chairs, including many purchased at office supply stores
Description
NOT FIT 40mm Diameter Base Hole.NOT FIT 40mm Diameter Base Hole.
NOT FIT 40mm Diameter Base Hole.
Product Description
Size: 6" (150mm) marked as 6.3" (160mm)
Adjustment Height (Piston Travel): 6" (150mm)
Cylinder Overall Length: 12.4"-18.3" (315-465mm),
Smaller tube Length: 2.8" (70mm),
Bigger tube Length: 9.6" (245mm)
Diameter of the outside metal tube is 1.57" / 40mm for bottom, 2" /50mm for above body.
Diameter of the smaller metal tube is 1.1" / 28mm.
Diameter of the plastic button is around 10mm.
Features:
- Adjust height of office chairs
- Class 4 level, Top Quality Level, Heavy Duty Construction, Specialized for Heavy Person,BIFMA Plus Quality
- Allows full 360 degree rotation
If your gas cylinder has worn out on your chair or stool, you may want to consider this Heavy Duty option. This replacement office chair gas lift cylinder is more heavy duty than standard chair gas lift cylinders. It's a great replacement option for damaged or worn out gas lifts on office chairs, task chairs, executive chairs, & more! While this gas cylinder will fit the majority of chairs and stools, it will not fit all. Please measure your original cylinder to be sure. Minimal dimensional differences shouldn't alter performance of lift when installed. Always remove gas cylinder with care and never heat or puncture.
if product missing, what shall I do ?
If happens to receive nothing but an empty package, No worry, just contact MySit by message/email to offer free warranty gas lift. This happens when the gas cyclinder top button triggered by pressed or drop to the ground.
if product not fit or not work, what shall I do ?
Please contact seller to offer good solution.
9. Replacement Office Chair Tilt Control Mechanism - S2979
Feature
Replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole patternSingle lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders
Tilt control - push lever in to lock tilt, pull out to unlock
Twist hand wheel to tighten or loosen (adjust) backward tilt tension
Black
Description
This very popular replacement office chair tilt control mechanism works great for restoring or repairing many office chairs, task chairs, and executive chairs that have the same screw mounting hole pattern.10. Furmax Drafting Office Chair Height Adjustable Swivel Mesh Reception Chair with Flip-Up Arms,Tall Chair for Standing Desks (Black)
Feature
Ergonomic backrest: fits the human physiological curve,while giving multidimensional protection of the spine, reduce fatigueFlow waterfall cushion: dimension upgraded, made of anti-tear mesh and original sponge, soft and comfortable, fresh and breathable, Sedentary not tired
High load bearing system: Thickened steel plate base with high strength alloy air pressure bar, stable and durable, maximum load bearing 285lbs
Multifunctional chair: easy to assemble , perfect for your office, learning, painting,reception, etc
Service guarantee:Free replacement or money back guarantee for any quality problem within 30 days; Free charge replacements for Installation problem, Damaged or Missing parts within 365days
Description
Furmax Drafting Office ChairFurmax Draft chairs are essential for any profession where work surfaces are above standard height.
Complete with a foot ring and extra tall gas cylinder, drafting chair built for the progressive minded.
The Drafting chair is perfect for lab technicians, architects, graphic artists, or any other creative assignment.
*Specifications:
- Color:Black
- Product Size(Backrest):20.9"X21.7"
- Product Size(Seat):19.7"X20.1"
- Load Capacity: 285 LBS
- Adjustable height from 20.5" to 28.0"
- Backrest adjustable down to a comfortable position
- Conventional Tilt Mechanism
- Universal casters
- Adjustable seat flexibility
*Features:
- High back mesh chair is designed for long time working, provide cool and extra comfort to you
- The high backrest and headrest design ensure proper alignment and support of your spine as well as your neck.
*Package Includes:
-High back office chair
-Installation Hardware
-Installation Tool
-Installation Manual