10 best bessey revo clamps 24 for 2020
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 bessey revo clamps 24. Its followed by an in-depth review of each bessey revo clamps 24. Hopefully, once you are done reading this article, you will be well informed about bessey revo clamps 24 and be able to select the right bessey revo clamps 24 for you without any hesitations.
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 bessey revo clamps 24. Its followed by an in-depth review of each bessey revo clamps 24. Hopefully, once you are done reading this article, you will be well informed about bessey revo clamps 24 and be able to select the right bessey revo clamps 24 for you without any hesitations.
Best bessey revo clamps 24
1. Bessey K-Body REVO 6 Piece Set
Feature
6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3550 50" and 2 KBX20 rail joining/extendersKBX20 Rail extenders are designed to join 2 Bessel Revolution or REVO clamps together forming a clamp with increased capacity
Join any 2 Revolution or REVO clamps together, for example; join 2 50" clamps to make a 100" capacity clamp!
Heavy duty precision extruded KBX20 extender comes complete with hardware to join 2 clamps for increased capacity
Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired (not included)
Description
6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3550 50" and 2 KBX20 rail joining/extenders.2. Bessey KR3.524 24-Inch K Body REVO Fixed Jaw Parallel Clamp, 2-Pack
Feature
Perfect parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps3-3/4-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces-rail protector pads snap off when not needed
1,500-pound clamping force, with ergonomic designed 2 component molded soft grip handle
Rapid action jaw opening and closing-simply raise handle away from steel rail and slide moveable jaw to desired point
Cold drawn steel alloy rail with six serrated edges for secure, slip proof clamping; K Body REVO clamps sit flush on work surface for easy set ups
Description
This 24" fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader.3. REVO Fixed Jaw Parallel Clamp, 24"
Feature
24" fixed jaw parallel clampLarge, flat parallel clamping surface
Internal frame ensures 90-degree angles even at maximum pressures
Replaceable protection caps for delicate surfaces
Easily converts to spreader without tools
Description
This 24" fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader.4. Bessey K Body REVO JR. Parallel Clamp, 24" Single
Feature
900 lbs. of clamping forceLighter weight means less fatigue and greater productivity
Quality construction
High-end quality with a mid-sized price
3-1/4" throat depth
Description
Prevent bowing, turning, and lifting while clamping with Bessey K Body REVO Jr. Parallel Clamps! Its large, parallel jaws are uniquely designed to distribute even pressure across the entire surface of your work. The K Body's updated design includes three removable jaw protection caps to help prevent wear, they're repellent to glue, easily replaceable, and resist paint and grease solvents. A quick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handle. Plus, each clamp includes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between the clamp and the actual workpiece. Plus, they deliver 900 lbs. of high pressure clamping, even at 90. And they have a powerful spreading feature for easy tear-down. Compatible with K-P clamp blocks and the K-Body Clamp Extender.Technical Details:900 lbs. of high-pressure clampingClamps accurately at 90Powerful spreading featureLarge, parallel jaws distribute even pressure across the entire surface of your workPrevents bowing, turning, and liftingThree removable jaw protection caps prevent wearRepellent to glue and resist paint and grease solventsQuick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handleIncludes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between the clamp and the actual workpieceCompatible with K-P clamp blocks and the K-Body Clamp Extender Two Slip-On Workpiece Supports5. BESSEY KRE3524 PAIR 24" K Body REVO Parallel Bar Clamp Now With Hex Key Clamping
Feature
Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.
Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.
Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
Easily converts to spreader without tools!
Description
PAIR of KRE3524 parallel bar clamps!BESSEY's K Body REVOlution parallel bar clamp has been redesigned to provide you with easier and more powerful clamping force than their previous model -- up to 1700 lbs! The new and improved operating jaw stays where you put it for easier set up; simply position the jaw where you want it and apply desired clamping force. Another new feature of this clamp is a steel socket running through the ergonomic handle that is designed to receive a hex key or driver on its end to provide more clamping force if desired (max torque 17Nm). Additionally, the jaws, which are designed to clamp at a 90-degree angle to the rail, provide a larger clamping surfaces than in the previous model and come with three removable pressure caps that are glue-, paint-, and solvent-resistant. Two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
The K Body REVOlution is easy to operate! To close and clamp your work-piece, tilt the handle down toward the rail, slide the jaw toward your work-piece, and tighten. Once positioned, the operating jaw will stay in place and provide you the clamping power you need, right where you need it. To remove the clamp, release the clamping pressure, and then simply pivot the handle up and away from the rail to slide the jaw away. Need a spreader? Simply remove the rail end clip, slide off the operating jaw and slide it back into the bar in the reverse position to give spreading support to your project, no tools required!
To maximize the potential of this clamp, consider purchasing the optional pivoting jaws (KR-AS) for your tapered work-piece clamping needs, and/or Bessey's framing blocks (KP Blocks) that, with four clamps, allow you to apply even clamping force at all four corners of your work-piece!
KRE3524 specs: 24" clamping capacity; 3-3/4" throat depth; 1700 lbs. of clamping force; 10" to 28-3/4" spreading capacity.
6. 24"Bessey K Body REVO
Feature
Perfect 90 degree parallel clamping force or spreading force up to 1,700 lbs, German cold drawn precision steel railOperating jaw stays where you put it for easy set ups, position where you like and apply clamping force
Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired (hex key not included)
3 removable jaw face caps are included, resistant to glue, paint & solvents
Bessel Revolution clamping system accessories are available at Amazon
Description
24" capacity, 3 3/4" throat depth, spreading capacity 10" to 28 3/4".7. Bessey KRJR18 K Body REVO JR, 18-Inch Parallel Clamp,Hammertone Grey
Feature
This parallel clamp has 900 lbsOf clamping force to provide the strength you need and can rely on
Large surface jaws are accurate at 90 degree angles and have removable pressure caps so you can keep them clean and in perfect working order
18-Inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp
Removeable end stop allows reversing the operating head to convert from compression force to spreading force
Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn
Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact
High clamping force (900 lbs) to weight (2.8 lbs) relationship for verstile clamping and light weight
8. BESSEY KRE3531, 31 In., Parallel Clamp, K Body REVO Series
Feature
Perfect 90 degree parallel clamping force or spreading force up to 1,700 lbs, German cold drawn precision steel railOperating jaw stays where you put it for easy set ups, position where you like and apply clamping force
Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired (hex key not included)
3 removable jaw face caps are included, resistant to glue, paint & solvents
Bessel Revolution clamping system accessories are available at Amazon
9. Bessey KREK2440 REVOlution Clamp Kit
Feature
6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3540 40" and 1 four piece KP Framing Block setKP Block set consists of; 4 molded fixtures designed for perfect clamping set ups of raised panel doors, frames or any square part glue up
Perfect 90 degree alignment of clamped components is easy with Bessel KP blocks
KP blocks include molded mounting holes for easy attachment to a work surface when it is desired
Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired (not included)
10. BESSEY GK15 6" GearKlamp 4-PK - Unique Clamping Solution for Tight Spaces
Feature
Four (4) BESSEY GK15 6" GearKlamp bar clampsClamp handle is separated from the spindle, leaving more clamping clearance for those tight spaces.
Clamp is easily positioned via a quick-release shift button. Final tightening is achieved by turning the clamp handle, which transfers the clamping force to the spindle via the gear train.
Features durable cold-drawn steel rail construction and fiberglass-reinforced plastic jaws that enclose the gear train to protect it from dust and debris.
Comes in 4 clamping capacities (6", 12", 18" and 24"), all of which feature a 2-1/2" throat and a 450lb clamp capacity.