Best amp meter panel dc
If you looking for amp meter panel dc then you are right place. We are searching for the best amp meter panel dc on the market and analyze these products to provide you the best choice.
If you looking for amp meter panel dc then you are right place. We are searching for the best amp meter panel dc on the market and analyze these products to provide you the best choice.
Best amp meter panel dc
1. McIgIcM Digital Voltmeter Led,Red and Blue Digital Voltmeter Ammeter Dual Display Voltage DC 0-100V 10ADetector Current Meter Panel Amp Volt Gauge 0.28"
Feature
Display: 0.28" LED digitalOperating voltage: DC 4.5 ~ 30V; Size: 48mm x 29mm x 26mm
Measure voltage: DC 0 ~ 100V;Minimum resolution (V): 0.1V;
Operating Current: <20mA;Minimum resolution (A): 0.01A;Measure current: 10A
Operating Humidity: 10 to 80% (non-condensing);Operating temperature: -10 to 65c
Description
Features: Operating voltage:DC 4.5 - 30V Measure voltage: DC 0 - 100V Minimum resolution(V): 0.1V Measure current :10A (measure directly,built-in shunt) Minimum resolution(A): 0.01A Operating current: <20mA Display color: Red and Blue (two-color display) Dimensions: 48 x 29 x 21mm Mounting cutout: 45.5 x 26.5mm Refresh rate: about 500mS / times Measure accuracy: 1% ( 1 digit) Operating temperature: -10 to 65 c Operating Humidity: 10 to 80% (non-condensing) Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement Wiring: Black line (thin): vacant or buck circuit (module) negative Red line (thin): power supply+ Black line (thick): COM, common measuring Red line (thick): PW+, measuring terminal voltage input positive Yellow line (thick): IN+, current input+ (Please refer to the wiring diagrams for more details) Notice: The voltage between the thin red and thin black lines must be within DC 4.5-30V The ammeter can only be connected to the negative of the device under test 10A below ammeter (include 10A), built-in shunt, does not require external shunt When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing Package include: 1x Digital Volt Ampere Meter2. DROK DC 0-300V 200A STN LCD Display Digital Multimeter Voltage Ampere Power Energy Ammeter Voltmeter Battery Volt Amp AH Monitor Panel with Hall Sensor
Feature
Multifunctional Meter: DROK multimeter panel is available to measure percentage and AH of remaining capacity, DC positive and negative bidirectional current, DC voltage, DC positive and negative power, DC positive and negative bidirectional accumulated electric energy. Voltage measurement range is DC 0-300V, current measurement range is 0-200A.Hall Sensor & Easy Mount: the voltage amperage meter is coming with a Hall transformer to for isolated measurement, reliable and safe; accepting two-wire system connection and three-wire system connection, could be powered DC5~90V, easy and simple to wire this meter up.
Display: backlight can be controlled to be ON or OFF as user's need; Equipped with full angle of view LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine.
Alarming Function: it will alarm and flash to draw your attention when the real voltage is higher or lower than preset alarming voltage and real current is higher than preset current; It will also alarm and flash to remind you to charge for your device when the remaining capacity of battery is low.
Wide Applications: Suitable for all kinds of batteries, such as Lead-acid batteries, Lithium Polymer batteries, lithium iron phosphate batteries and etc. With function of storing date when power down, using this meter, no need to worry that your electric data will be lost.
Description
Technical Parameters:
Model: WLS-PVA200
Current measuring range: 200A
Current resolution: 0.1A
Power supply range: DC590V
Voltage measuring range: DC0300V
Voltage resolution: 0.1V
Capacity measuring range: 0999AH
Power measuring range: 0999KW
Electric energy measuring range: 0999KWH
Measurement error:1%
Refreshing speed: 0.5S/time
Installing size: 76.0mm * 39.5mm
Diameter of transformer:20mm
Working current: backlight on: 10MA;backlight off4MA
Package includes:
1 X LCD Digital Cullen Meter
3. DROK 0.39" Current Voltage Tester, DC 4.5-100V Digital Multimeter; 0-50A Volt amperage Meter, Red & Green Dual LED Display, Volt Amp Meter Gauge Panel for Car Automotive
Feature
EFFORTLESS WIRING & COMPACT DESIGN: DROK tester multimeter provided with 3 wiring terminal, when testing voltage and current, the power comes from the return circuit, so you don't need extra power supply. Besides, this meter can display voltage and current simultaneously in such a tiny size (70mm * 40mm * 30mm).WIDE MEASURING RANGE: The multiple meter has wide measuring range (Voltage measuring range: DC 4.5-100V; Current measuring range: 0-50A). What's more, this ampere voltage gauge has voltage calibration potentiometer and current calibration potentiometer, if there is an error, you can adjust them by yourself.
COMMON-GROUND DESIGN: DROK volt amp meter digital is provided with 3 wiring terminal, when testing voltage and current, the power comes from the return circuit, so you don't need extra power supply.
STRONG INTERFERENCE CAPABILITY: The current voltage monitor has strong anti-interference capability, it can quickly display refresh rate; with exquisite SMT technology, it has good consistency. And this ammeter voltmeter panel owns shell, safe, reliable and dustproof.
WIDE APPLICATION: DROK dc voltmeter ammeter has handy connection and wide application, for example, it can be applied to monitoring storage battery, DC adjustable power supply, or voltage and current changing state of other device.
Description
Parameters:Voltage Measuring Range: DC 4.5-100V
Voltage Resolution: 0.01V under 10V; 0.1V between 10V and 100V
Current Measuring Range: 0.0-50.0A (If the current is higher than 20A, a shunt is required to use, or the meter will burn;
Current Resolution: 0.1A
Display: 0.39" LED
Measuring Velocity: 500mS each time
Accuracy of Measurement: 1% (1 digit)
Opening Size: 68mm * 38mm
Dimension: 70mm * 40mm * 30mm
Extreme Working Condition:
Working Temperature: -10+65
Working Humidity: 1080% ( No Condensation)
Working Air Pressure: 80106kPa
Sunlight: No direct exposure
Connecting Method:
COM: Common terminal of power supply negative pole
V+: Positive pole of tested voltage, positive pole input terminal of power supply
A+: Positive pole input terminal of tested current ( This meter adopts common-ground design that earth wire of measuring terminal is interlinked with earth wire of power supply,
so A+ only can be connected between the tested device negative pole and power supply negative pole.
the meter will be burnt if connected wrong.)
Note: If the meter is just used as voltmeter, it is suggested that the yellow wire and black wire are connected together.
Package Included:
1 x DC meter
4. AC Power Meter, DROK AC 80-300V 100A Voltage Current Color LCD Display Panel, Digital Voltmeter Ammeter Watt Active Power Energy Monitor Multimeter Volt Amp Meter with Current Transformer CT
Feature
Parameters: DROK ac power meter voltage measuring range is AC 80-300V, current measuring range is 0-100A, active power range is 0-45000W, electric energy range is 0-9999999kWh.Color LED Display: the panel meter voltage current adopts clear LCD displaying accurate voltage, ampere, active power and electric quantity measuring values.
Special Design: our ac voltage display designed with a switch for clear electric energy and come with a 15.5mm CT, with fast measuring speed of 2 times/s.
Auto Store & Memory Function: when power off, the electric energy data will be stored and memorized, can be reset.
Note: this meter is only used for measure 50Hz city electricity, it will be destroyed if used to measure square wave, output of inverter and modified sine wave circuit.
Description
Parameters:Voltage Measuring Range: AC 80.0-300.0V
Current Measuring Range: AC 0-99.99A (Resolution: 0.01A, display 100.0A when over 100A)
Active Power Measuring Range: 0-3000W
Resolution: 0.1W (under 10 000W); 1W (over 10 000W)
Electric Energy Measuring Range: 0-9 999 999kWh
Resolution: 0.001kWh (0-9 999.999kWh); 0.01kWh(10 000.00-99 999.99kWh); 0.1kWh(100 000.0-999 999.9kWh); 1kWh(over 1 000 000kWh)
Measuring Accuracy: 1% 2 digits
Measuring Speed: 2 times per second
Outside Dimension: 79*43*48mm
Installation Dimension: 76*39mm
Save Function: Automatically save the accumulated electricity value during the power outage.
Reset Function: Long press the reset button for 5 seconds, the accumulative electricity will be cleared to zero.
Operating Condition:
Working Temperature: -10+50
Working Humidity: 10 ~ 80% (no condensation)
Working Pressure: 80 ~ 106kPa
Sunlight: No direct exposure
Wiring Connection:
(a) Connect the green wire of secondary CT(current transformer) to the BLUE terminal of the meter.
(b) Pass the circuit under measurement through the hole of the CT, and then connect it to the green terminal.
(c) After power on, the screen will display the measured data.
Note:
The multimeter can only work on AC 50-60Hz pure mains supply. Do not use it to measure square wave, inverter output and the corrected sine waves circuits, otherwise the product will burn!
Do not wrongly exchange the wiring of voltage input(green terminal) and current transformer(blue terminal), otherwise the product will burn!
Do not squeeze the LCD screen when install the multimeter, otherwise the screen will display gibberish or broken codes.
Package Includes:
1 X AC Power Meter
5. Baomain DH-670 DC 100A Analog Amp Panel Meter Current Ammeter with 75mV Shunt
Feature
Analog Amp Panel Meter Current Ammeter DC 0-100A+ShuntScale Range : DC 100A
Overall Depth(Screw not Included): 3.5cm/ 1.4 inch
Face Size: 70 x 60mm/ 2.8 x 2.4 inch(L*W)
Screw Dia: 2.8mm/ 0.11", 3.7mm/ 0.15";Weight:205g
Description
6. ZRM&E 0.28 Inch Mini Digital Voltmeter Ammeter DC 0-100V 10A Red Blue Dual LED Display Panel Amp Volt Current Meter 2 In 1 Tester
Feature
Type: Voltmeter & Ammeter 2 in 1 Tester, Voltage Measuring Range: DC 0.0V-100V, Current Measuring Range: DC 0-10A2 Color LED Dispaly: Adopting three 0.28" LED digital tube, red + blue dual voltage and current display, automatically moving, bright and clear, convenient for you to check the measured result.
Function: Can display voltage and current at the same time in such a small size, all-cover shell, safe, reliable and dustproof, with reverse connection protection, high precision, high reliability, for high-end applications.
Easy to Use: Come with 2 x cables which are easy to connect.
Application: Can be widely applied to monitoring voltage of storage battery, mastering voltage state of storage battery, and measuring voltage and current of other devices.
Description
Specification:Name: Voltmeter & Ammeter 2 in 1 Tester
Voltage Measuring Range: DC 0.0V-100V
Current Measuring Range: DC 0-10A
Operating Voltage: DC 4-30V
Operating Current: Less than 20mA
Voltage Resolution (V): +/- 0.1%
Current Resolution (A): +/- 1%
Refresh Rate: About 300mS/times
Operating temperature: -10 to 65 degree
Display: Three 0.28" LED digital tube
Display Color: Red and Blue (two-color display)
Cable Length: 15cm
Dimensions: 48x29x22mm(LxWxT)
Mounting Hole: 46x27mm
Feature: High precision, high reliability, for high-end applications.
Function: With reverse connection protection
Applications: Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
Package:
1Pc x Digital Voltmeter Ammeter Meter
2Pcs x Cable
7. DROK Digital Multimeter Charge-Discharge Battery Tester, LCD Color Screen Voltmeter Ammeter DC 0-90V 0-20A Volt Amp Watt Time Capacity Electricity Meter Monitor
Feature
MULTIMETER: this multifunctional meter can measure DC voltage, current, power, charging capacity, time, and other physical quantities at the same time; can be directly used, no need shunt.MEASURE RANGE: DROK digital multimeter can messure voltage range DC 0-90V, current range 0-20A, power range 0-9.99KW, capacity range 0-999Ah, time range 0-99.9 hours.
LCD COLOR DISPLAY: the voltage current power panel gauge adopts 1.8 inch LCD color screen, can be seen even under sunlight; LCD display will automatically turn off after two minutes if current less than 50mA, pressing any key can turn off, or it will wake up automatically when the current is greater than 50mA.
DATA STORE: DROK battery tester can automatically save the parameters when the display power off; if the monitor module also needs to power off, press OK button can save the parameters.
BIDIRECTIONAL DETECTION: it's bidirectional, can detect and display current of charging and discharging. Note: it can not detect current of two directions at the same time.
Description
Parameters:
Voltage Measurement Range:
Self-supply Power: DC 10~90V
External-supply Power: DC 0~90V
Current Measurement Range: 0~20A
Display Resolution:
Voltage : 0.01V
Current : 0.01A
Time : 0.01H
Capacity : 0.01AH
Current Precision: 1% + 2 digits
Voltage Precision: 2% + 5digits
Measurement Rate: 5 times/sec
VOP( Over-voltage Protections): 0.01V~90V
OPP( Over-power Protections ): 0.01W~9.99KW
OCP( Over-current Protections ): 0.1~100A
OAH( Over-AH Protection ): 0.01AH~9999AH
OFT( Over-time Protection ): 0.01H~99.9H
Open Holes (mm): 76.5*39.2mm
Size: 794352(mm)
Note: There is no relay with this version, therefore, LOP(low voltage protection) function can not be used.
Package Includes:
1x Multifunctional Meter
8. Yeeco Digital DC Voltmeter Ammeter Multimeter, 10-90V 0-200A LCD Color Display Voltage Ampere Power Watt Coulomb Capacity Time Meter Tester Testing Detector with Hall Sensor
Feature
DC 10-90V 0-200A multimeter, one gauge with multi function to detect voltage, current, capacity of charging and discharging, time, power and other physical informationWith Power off memory function: Power rate(AH ) will be stored when power off suddenly, convenient for load testing, monitoring and calculating in your DIY or experiment
Comprehensive protection of over-voltage; over-current; over-power; over-time and over-charge capacity; with Hall sensor to test the current, safe and convenient
Test current according to the Hall sensor provided, let the wire which has current in it to pass through the hole of the sensor, bidirectional current can also be tested
Size: 79x43x52mm(LxWxH), Opening size: 76.5x39.2mm; Ribbon cable: 20cm; easy to wire up according to the wiring diagram; Provided 3 buttons "", "", "OK" for adjustment
Description
Parameter:
Current Measurement Range: 0-200A
Voltage Measurement Range: 10-90V
Display Resolution: 0.1A
Current Precision: 3% 5 digits
Voltage Precision: 2%5digits
Measurement rate: 5time/second
Size: 79x43x52(mm)
Open Hole: 76.5x39.2mm
Protection Type & Setting:
OVP (over-voltage protection): 0.01V-90V
OPP (over-power protection): 0.01W-9.99KW
LOP (low-voltage protection): 0.01V-90V
OCP (over-current protection): 0.1-100A
OAH (over-charge protection): 0.01AH-9999AH
OFT (over-time protection): 1min-99hour59min
Package include:
1xMultimeter
1xHall sensor
9. DROK 0.28" DC 0-100V 10A Digital Current Tester Gauge Red Green Bright LED Display Five Wires Volt Amp Meter for Solar Battery Monitor Car Motor Panel Mount
Feature
Voltmeter Range: DC 0-100V (resolution of 0.1V); Ammeter Range: DC 0-9.99A.Display: Dual 0.28" three digit Red/Green LED tube, very bright and clear.
Compact design and well made, the dimension is 48mmx29mmx21mm, cutting size 45mmx26mm.
With built-in shunt, you can wire it directly in to get current rating and don't need an isolated power supply.
Has zero calibration button "KEY" and current calibration potentiometer "R7" on its back to do finer adjustments.
Description
Features:Cutting Size: 45mmx26mm
Dimensions: 48mmx29mmx21mm
Power Supply: DC 3.5-30V
Voltmeter Range: DC 0-100V (resolution of 0.1V)
Ammeter Range: DC 0-9.99A (Direct measurement, no requirement of shunt)
Display: Dual 0.28" three digit LED tube
Display Color: Voltmeter Red, Ammeter Green
Refresh rate: about 500ms / times
Accuracy: + / - 1% + 2 digits
Wire Connection:
Thin Red line (VCC): Power Supply + (DC 3.5-30V +)
(if the measure voltage between DC 3.5-30V, then the Thin Yellow line and Thin Red line can connect together)
Thin Black line (GND): Power Supply - (DC 3.5-30V -), Measure Voltage - (DC 0-100V -)
Thin Yellow line (VIN): Measure Voltage + (DC 0-100V +)
Thick Red line (I+): Current Input +
Thick Black line (I-): Current Input -
More detail please check the description picture.
Error Phenomena:
Due to the aging of the device and change of ambient temperature
1. the error becomes larger when measuring small current
Solution: When there is no load, short-circuit 2 pads of KEY and then power on, the module will automatically do zero calibration, after that shut off the module and cut the short circuit point.
2. the error becomes larger in whole measurement range
Solution: When connecting load(half of the range is best), keep adjusting R7 until it displays the same value with the more advanced calibration source.
Note:
If measure the current over than 5A for long time. please welding the wires to the meter port, to avoid High impedance and unstable working.
When the power supply is greater than 24V, please connect a 1k resistor in series to increase the reliability of the product
Package Included:
1x 2in1 Voltmeter/Ammeter DC
10. Yeeco 0-10.00A Digital AC Ammeter Amp Panel Meter Ampere Monitor AC Current Tester AC/DC 8-12V Powered (AC0-10.00A)
Feature
Measurement Range: AC 0-10.00APower supply: AC/DC8-12V(Isolation Separately power supply, otherwise the instrument to burn)
Accuracy: 0.5% 2 digits
LCD display: character height 20mm
model:D69-40
Description
D69-40 LCD Digital AC ammeter amp panel meter Ampere Monitor AC Current tester AC/DC 8-12V powered
Measurement Range: AC0-10.00A
Power supply: AC/DC8-12V
(Isolation Separately power supply, otherwise the instrument to burn)
Accuracy: 0.5% 2 digits
LCD display: character height 20mm
packing including: 1x Digital AC ammeter