Which are the best smoke detector hardwired available in 2019?
Shopping for the best smoke detector hardwired is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy smoke detector hardwired. Don’t worry any more! We spend many hours to review and compare smoke detector hardwired to make the short list for you. Let’s check which product is suitable with you.
Shopping for the best smoke detector hardwired is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy smoke detector hardwired. Don’t worry any more! We spend many hours to review and compare smoke detector hardwired to make the short list for you. Let’s check which product is suitable with you.
Best smoke detector hardwired
1. Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning | Hardwired w/Battery Backup | Interconnectable | Model # KN-COSM-IBA
Feature
Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages.Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracketHumidity range:10%-95% relative humidity, non-condensing.Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
Peak Level Memory-Announces "CARBON MONOXIDE PREVIOUSLY DETECTED" if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions:- Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
Talking alarm announces the hazard type detected, helping to speed up reaction time
Combined carbon monoxide and smoke alarm, a single unit can be installed where previously two were needed
Battery safeguard ensures the unit cannot be accidentally mounted without batteries
Test-reset button tests alarm circuitry and triggers the voice announcement
Meets safety standards set by Underwriters Laboratories (UL) and interconnects with other KN-COSM-IBA models
120V AC, All Kidde brand hard wired smoke alarms are interconnectable with the KN-COSM-IBA
Description
This combination smoke/CO alarm features an 85dB horn and voice that announces "Fire", "Carbon Monoxide", and "Low Battery" warnings when detected. It can also interface with other Kidde interconnectable alarms. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm, Detection Method Ionization, Electrochemical, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-3/4 In., Height 1-3/4 In., Digital Readout No, Battery Backup Yes, Features Voice Warning, Peak Level Memory, Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes Mounting Anchors and Screws2. First Alert BRK Brands 9120B Hardwired Smoke Alarm with Battery Backup, Single
Feature
Tamper resistant locking pins, single button silence/test and loud 85dB alarm120-Volt AC power with 9-Volt battery backup (included) to keep alarm functioning during power outage
Open mounting design for easy installation with side load battery compartment for quick replacement and interconnectable up to 18 units (12 smoke, 6 CO/heat/relay)
10-Year limited warranty
Description
NOTE:The product is a hardwired alarm, also confirm if the wiring polarity is correct and that all wire nut connections are secure. A loose neutral (white wire) connection within the home junction box could prompt a device malfunction. Promote greater household safety with the First Alert 9120B Hardwired Smoke Alarm with Battery Backup. This 120-volt AC smoke detector uses an ionization smoke sensor to reliably detect smoke from hot, fast-flaming fires and alerts you with a loud 85-decibel alarm. Designed to be wired directly into your home's electrical system, this hardwired smoke detector features a backup battery that helps keep the alarm functioning even in the event of a power outage. The gasket-less mount helps ensure a perfect alignment for easy installation, while tamper-resistant locking pins keep the alarm secure. And thanks to the convenient test/silence button, you can easily check whether the alarm is functioning properly and mute false alarms. This smoke alarm can integrate with up to 12 other First Alert or BRK hardwired alarms and features a latching indicator that identifies which unit triggered the alarm.3. First Alert BRK SC9120B Hardwired Smoke Detector and Carbon Monoxide (CO) Detector with Battery Backup
Feature
Keep your family safe with this hardwired smoke and carbon monoxide alarm; the battery backup means constant monitoring, even if there's a power failureFeatures an electrochemical Carbon Monoxide sensing technology as well as an ionization sensor that detects the fine particles of a fast-burning fire
Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection
Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
Simple to use, with a single test/silence button, and side-load battery compartment; tamper-resistant locking brackets and universal mounting brackets make installation easy
Rigorously tested to meet UL standards
Description
This First Alert SC9120B Hardwired Smoke and Carbon Monoxide Detector includes a 9-volt battery backup that continues to protect you in the event of a power failure. The alarm features electrochemical CO sensing technology, an ionization sensor for smoke detection, and an 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke or carbon monoxide. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it's time to replace the unit. Easliy connect it to compatible BRK or First Alert alarms within a single-family residence; connecting will sound all the alarms together.4. Kidde i12040 Hardwired Smoke Alarm with Battery Backup and Smart Hush
Feature
Hush feature temporarily silences nuisance alarmsOne touch test button tests unit's electronic circuitry
9V Battery Backup (included).
Tamper resist locking pin helps deter alarm tampering and theft
Kidde smoke alarms meet the UL requirements
Description
This smoke alarm responds well to fast-raging fires. It emits an 85dB horn and red LED. It also features a test/reset button to test alarm circuitry, alarm activation, and battery function. It can also interface with other Kidde interconnectable alarms. Meets UL, NFPA, FHA, HUD, CSFM standards Smoke Alarm, Detection Method Ionization, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-1/2 In., Height 1-1/2 In., Width -, Digital Readout No, Battery Backup Yes, Features Alarm Memory, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes 9V Battery, Manufacturers Warranty Length 5 Year Limited5. Firex Hardwired Smoke Alarm I4618AC
Feature
Easy Installation - Front battery pull tab allows battery activation without removing alarm from mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.Fewer Callbacks - Large centrally located Test/Hush alarm control button. Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features - Easy access front loading battery door. Battery backup provides protection in case of power failure. Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user's guide for complete instructions.
Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system.
Tamper resist locking feature deters alarm theft
Description
The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.6. Kidde I12060 Hardwire with Front Load Battery Backup Smoke Alarm, 6-Pack
Feature
Front load battery door provides easy access which reduces the installation time and battery replacement timeBattery pull tab prevents draining battery until permanent AC power is connected
Hush feature temporarily silences nuisance alarms
One touch test button tests unit's electronic circuitry
Kidde's smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Description
The AC-powered, hardwired Kidde i12060 ionization smoke alarm is designed to protect you and your family from the dangers of smoke and fire. This smoke alarm's trademarked hush feature allows you to silence nuisance alarms, while an indicator LED and a test feature let you easily confirm that the alarm is working. This wire-in smoke detector also has a battery backup feature (with included 9-volt battery), and its front battery door makes replacing the battery easy for anyone.7. Kidde i12060 Hardwired Smoke Alarm with Front Load Battery Backup Smoke Alarm
Feature
Front load battery door provides easy access which reduces the installation time and battery replacement timeBattery pull tab prevents draining battery until permanent AC power is connected
Hush feature temporarily silences nuisance alarms
One touch test button tests unit's electronic circuitry.Kidde?s smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Temperature range:40F to 100F
Description
This smoke alarm responds well to fast-raging fires. It emits an 85dB horn and red LED. It also features a test/reset button to test alarm circuitry, alarm activation, and battery function. It can also interface with other Kidde interconnectable alarms. Meets UL, NFPA, FHA, HUD, CSFM standards Smoke Alarm, Detection Method Ionization, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5 In., Height 1-3/4 In., Width -, Digital Readout No, Battery Backup Yes, Features Alarm Memory, Battery Pull Tab, Dust Cover, AC Quick Connect, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Manufacturers Warranty Length 10 Year8. Kidde Firex Hardwired Smoke Alarm I4618
Feature
Latching LED, a red LED flashes until reset for quick, clear identification of the initiating smoke alarm in an interconnected systemVisible low battery indicator, helps locate chirping unit
Front loading battery door makes battery changing simple and power link tab makes installation faster and easier
False alarm control quiets unwanted alarms for up to 15 minutes
Interconnects with other Firex smoke alarms and heat alarms compatible with other contractor preferred Firex products
Description
NEW FIREX/KIDDE i4618 AC/DC 120V SMOKE ALARM SLIDE LOAD W/ 9V BATTERY BACK UP9. First Alert BRK 7010B Hardwire Smoke Alarm with Photoelectric Sensor and Battery Backup (3 Pack)
Feature
120-volt hardwire smoke alarm with photoelectric sensor and battery backupFeatures convenient 9 volt battery backup, silence/test button, dust cover, 85-decibel alarm
Inter-connectable with BRK and First Alert hardwired smoke and carbon monoxide alarms
Intuitive latching alarm indicator identifies which unit triggered alarm
Backed by 10-year limited warranty and tested to meet UL 217 standards
Description
The First Alert BRK 7010B hardwire photoelectric smoke alarm with battery backup is a hardwire 120V single or multiple station smoke alarm designed for residential home use and institutional locations such as hospitals, hotels, motels, dormitories and other multiple family dwellings. This alarm is inter-connectable and can be installed and linked with up to 18 compatible devices (up to 12 smoke alarms and 6 compatible devices like bells, horns and repeaters) so that when one triggers, all alarms sound. The First Alert BRK 7010B emits loud 85dB audible alarm. The alarm also features a photoelectric smoke sensor, which is particularly effective at detecting slow smoldering fires. The Frist Alert BRK 7010B hardwire smoke alarm with battery backup is packed with convenient features. The single test/silence button silences a non-threatening alarm or low battery warning; plus allows you to test the unit's functionality quickly. The latching alarm indicator will automatically identify which unit initiated the alarm if alarms are installed in a series - helping identify the initial location and source of an incident. The smoke detector also includes an optional drawer and mounting bracket lock to prevent tampering or removal of the 9-volt battery. End of life signal provides audible notice when the alarm needs to be replaced after 10 years of service. This alarm is backed by a 10 year limited warranty and is tested to meet UL standards 217. Includes smoke alarm, mounting bracket, 9-volt backup battery and user's manual.10. Firex AC Hardwired Combination Carbon Monoxide & Photoelectric Smoke Alarm KN-COPE-IC
Feature
Provides protection from fire and carbon monoxide in one unit with Photoelectric sensor.Fire Warning - The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message "FIRE! FIRE!". The alarm will repeat pattern until unit is reset or smoke is eliminated.
Carbon Monoxide Warning - Four short alarm beeps followed by a verbal warning "WARNING! CARBON MONOXIDE!" This continues until the unit is reset or the CO is eliminated.
Low Battery Warning - One chirp followed by warning "LOW BATTERY". The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The "LOW BATTERY" warning will only sound once every fifteen minutes. Voice Hush Indication: "HUSH ACTIVATED" and "HUSH CANCELLED" voice announcement
Alarm Memory - The green LED will blink once every 16 seconds to alert a user when the unit has alarmed for smoke or has detected a concentration of CO. If the alarm has detected a CO level of 100ppm or greater, when the Test/Reset button is pressed the unit will announce "CO PREVIOUSLY DETECTED". If the alarm has detected abnormal levels of smoke since its last test, it will produce three rapid beeps.
AC-Wire with battery backup, An included 9V battery protects during short-term power outages
Front-loading battery with unique battery door design
Voice Warning with Green and Red LEDs
Photoelectric smoke sensor - May detect visible fire particles associated with slow smoldering fires sooner than an ionization sensor.
Tamper resistant