10 best toner probe cable tester for 2019
Finding your suitable toner probe cable tester is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best toner probe cable tester including detail information and customer reviews. Let’s find out which is your favorite one.
Finding your suitable toner probe cable tester is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best toner probe cable tester including detail information and customer reviews. Let’s find out which is your favorite one.
Best toner probe cable tester
1. Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking
Feature
Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester.
Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers.
Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.
Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
Description
This instrument is a multifunctional handheld cable testing tool. Work perfect when RJ11 RJ45 cable is on power. It has a wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wiring engineering, and network maintenance person.General Technical Parameters
Operating temperature: 0 - 40 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Storage temperature: -10 - 50 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Altitude: less than 2000m
Anti-explosion rating: IP40
Distance of emitting signal: 300m or so
Emitter battery: 6F22 / 9V (not included).
Receiver battery: 6F22 / 9V (not included)
Specification Parameter
Product weight: 0.180 kg
Package weight: 0.270 kg
Product size: 20.00 x 4.00 x 3.00 cm / 7.87 x 1.57 x 1.18 inches
Package size: 22.50 x 12.20 x 4.70 cm / 8.86 x 4.8 x 1.85 inches
Scope of application: Education,Home appliance,Industrial,Market,Office,Supermarket
What's In The Box?
1 x FWT11 Emitter
1 x FWT11 Receiver
1 x Clip Adapter Cable
1 x RJ11 Adapter Cable
1 x User Manual
2. Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit, IntelliTone Probe and Toner Kit
Feature
IntelliTone digital toning eliminates noise and false signalsSmartTone analog toning precisely isolates individual wire pairs
Locates cables safely and effectively on active networks
Verifies twisted-pair installation with visual end-to-end continuity test
Probe detects digital signal and 1 kHz signal from the analog toner
Probe has built-in pair tester to identify open, shorted and crossed pairs
Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
Description
INTELLITONE 200 KIT. IntelliTone digital toning eliminates noise and false signals. Smart Tone analog toning precisely isolates individual wire pairs. Locates cables safely and effectively on active networks.3. UbiGear Network/Phone Cable Finder/Toner/Probe/Tracer/Tester + RJ11/RJ12/RJ45 Crimp Crimper + 100 Pcs RJ45 CAT5e Connector Plug Network Tool Kits (PremiumTester)
Feature
Cable Tester/Probe/Finder/Toner (1 set)1-PCS 568R Crimper -- works for RJ11 (6P4C), RJ12 (6P6C) and RJ45 (8P8C) connectors
2-PCS 9" ScrewDriver (flat & cross) AND 2-PCS Punch-Down Tools
3-PCS wire cutter (wire cutting piler/yellow cutter/grey adjustable cutter)
50-PCS RJ45 CAT5e 8P8C Pass-through Modular Plug Network Connector
Description
Description This instrument is designed to identify and trace wires or cables without damaging the insulation, you can also use it in checking for short circuit and locating open circuit and so on. In addition, it can also be used to identify some states of telephone. Designed for use with telephone lines, alarm cables, computer cables, intercom lines, speaker wires, and thermostat wiring Scanning Function - Find out working wire (network cables, phone lines, coaxial cable, buried cable and even cable behind wall) Cable Tester Function - Check the working state of each wire (RJ11/RJ45) Circuit State Test Function - Test if the circuit is working properly, or if there is a open/short circuit. Package Included: 1. 1 x Cable Crimper (for 8P8C RJ45 and 6P4C RJ11) 2. 1 x 6" Punch Down Tool KD-1 3. 1 x 3.5" Cable Cutter (Yellow) 4. 1 x Network Cable Tester 5. 1 x Multi-function Stripper/Cutter 6. 50 x RJ45 Pass-through Connector 7. 1 x Straight screwdriver 8. 1 x Cross screwdriver 9. 1 x wire cutter 10. 1 x Impact Punch Down Tool 11. 1 x Took Kit Case (10.5" X 13.5" when open) Brand Name: UbiGear (TM) with One-Year Limited Warranty4. Fluke Networks PRO3000F60-KIT Includes Tone Generator & Probe with 60Hz Filter and SmartTone Technology, 4962074
Feature
Clear - innovative filter technology blocks interference ("buzz") that makes tracing difficultPrecise - SmartTone technology provides five distinct tones for exact pair identification
Tone and trace wire on non-active networks
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud probe speaker is audible in noisy locations
Description
Stop the Buzz. Find Cables Faster with Clear, Precise Toning The probes innovative filter obstructs 60 Hz signals in the environment (caused by power cables and lighting) when listening for tone. The probes powerful speaker makes tracing cables through drywall easy. The toners SmartTone technology allows for exact pair identification.5. Triplett Fox & Hound 3399 Premium Wire and Cable Tracing Kit with Tone Generator and Probe with Adjustable Sensitivity
Feature
TriplettWire Tracing Kit With True Trace Technology. Trace Wires With Adjustable Sensitivity; Tone Generator Features 3 Methods Of Connectivity R-11
Rj-45
Tracer displays audi
Description
The FOX 2 and HOUND 3 wire tracing kit consists of a premium FOX 2 Tone Generator (Toner) and a newly designed HOUND 3 Inductive Amplifier (Probe). The FOX 2 is a battery operated handheld lightweight multi-function Toner that generates multiple tones, performs some basic telephone line tests (loop mA and line polarity), provides a visual and audible continuity test, and incorporates Tripletts True Trace and TripLatch tests. The HOUND 3 is a battery operated handheld lightweight Probe, with a thumbwheel Sensitivity control and Signal Strength indicator LED. It improves on previous designs (the HOUND and HOUND 2) with built-in LED illuminators, a bandpass filter, an earphone jack, and an easy access battery cover. An included convenient carrying case (with belt loop attachment) provides ease of use and protective storage for the FOX 2 and HOUND 3. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself in developing innovative, reliable, and durable test equipment for every technician--that also won't break the bank.6. Jonard Tools TETP-900 Multi-Function Cable Tester Toner and Probe Kit
Feature
Cable tester, tone tracing probe(2) BNC male to F female connectors
BNC cable terminator 50 ohm
RJ45 jumper
Nylon bag, belt clip, & user's manual
Description
Ideal for VDV (voice - data - video) professionals in telecommunications, network and digital communications. This is a multi-function cable tester for RJ45 LAN cable, BNC/F coaxial cable, 6P2C/4P2C jacks and provides tone generation.7. Multi-function Network Cable Tester RJ45 RJ11 Wire Ethernet Tracer Remote Toner Tool Kit with Bag Probe Audio Tone for LAN CAT5 CAT6 Tracker Telephone Line Finder Speed Check Home Repair
Feature
Verify LAN cable condition. Continuity test. Cable Assignment Test and Cable State Testing (2-wire).Trace telephone wire/LAN cable. Trace wire in electrical system. It can take place of cable tester.
Low Battery Indication with Bright white LED flash light. Rapidly find the target wire from among plenty of telephone wires. Rapidly find the target wire from among plenty of network wires.
Find target wire on all types of connected operating Ethernet switch /Router/PC.
Package Included: 1 x Cable Transmitter, 1 x Cable Receiver/Tracker,1 x RJ45 Cable, 1 x RJ11 Cable, 1 x Cable with crocodile clamp, 1 x Earphone, 1 x Instruction manual, 1 x Bag
Description
Features:1. Cable hunting: Directly hunt the cable with RJ11, RJ45 and BNC terminal and other metal leads through adaptor
-When cable is hunted, there is no need to strip off cable sheath, which is easy and quick to judge the location of breakpoint in cable
-It can directly hunt cable when weak current equipment is turned on, such as Ethernet switch, router
2. Test network cable: It can fully test the line sequence of network cable, open circuit, short-circuit, miswire, reverse connection and splitpairs
-Test line level, positive and negative polarity
-Test the status of telephone line: It can test the working status of telephone line (idle, ringing, and off-hook) and judge TIP or RING line
3. Check lead continuity
-Test the connection between network cable and switch port
-It provides low voltage prompt function and the receiver has installed spotlight
Specifications:
Available Color: Orange,Red,Purple,Blue,Gray
Operating temperature/humidity: 0~+40C, maximal 80 % relative humidity(non-condensing)
Storage temperature/humidity: -10~+50C, maximal 80 % relative humidity(non-condensing)
Altitude: <2000m
Anti-explosion rating: IP 40
Distance of emitting signal: >3000m
Battery: emitter 6F22/9V; receiver- 6F22/9V(not included)
Size: emitter 125mm x 66mm x 30mm; receiver 210mm x 45mm x 23mm
Package including:
1 x Cable Emitter
1 x Cable Receiver
1 x RJ11 Cable
1 x RJ45 Cable
1 x Earphone
1 x Cable with Crocodile Clamp
1 x Instruction Manual
1 X Toolkit
8. Triplett / Byte Brothers CTX200P Pocket CAT LAN Tester with Inductive Tone Probe for RJ45 CAT5 CAT6 and Coax Cables
Feature
Tests both RJ45-CAT5/6 and coax cablesRuggedized for field use and no LCD to break
PASS/FAIL results appear in one second
Complete TIA568 test performed. Continuity,
Includes a lighted tone probe
Description
Byte Brothers tools exhibit 3 qualities: Innovation, Top Quality, and Affordability. Byte Brothers guarantees these 3 qualities plus offers US-based customer support, training and quick upgrade and warranty service. Whether you are in the dotcom, telecom, audio/video, electrical or security field, you will find Byte Brothers products designed for you at a price you can afford. The CTX200P Pocket CAT is a combination CAT5-6/Coax Tester and Toner/Probe set. Its low cost, versatility and rugged design make it the perfect tester for any toolbox. The Cable Test/Tone unit identifies opens, shorts, crosses and split pairs with instant PASS/FAIL results. It also generates a tone for tracing cables. The Lighted Probe detects the tone generated from the Main unit. (Note: The CTX200P is also available without the lighted probe. See part number CTX200.) The Main unit tests both RJ45-CAT5/6 and coax cables. Ruggedized for field use with a cushioned case and no LCD to break. PASS/FAIL results appear in one second and each pair's status is highlighted. A TIA568 test is performed: continuity, opens/shorts, reversals and split pairs. Includes tone mode for tracing and troubleshooting. It also features an auto-off (12 seconds) battery saver; low battery indicator; belt clip; battery (9V);and zippered pouch. The Tone Probe features high end probe technology for detecting the tone from the Main unit. Also included is an ultra bright LED lighted tip for seeing in dark closets; a safety LED to indicate "60HZ present"; a "Tone present" LED lights to aid in noisy environments; an insulated tip to stop accidental shorts when probing punch down blocks; and volume control. Battery (9V) included. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself in developing innovative, reliable, and durable test equipment for every technician--that also won't break the bank.9. Wire Tracker,RJ11 RJ45 Line Finder Cable Tester for Network LAN Ethernet Cable Collation, Phone Telephone Line Test Wire Tracer Cable Tracker
Feature
VERIFY LAN CABLE CONDITON - Plug one side of the cable into the emitter and the other side into the receiver, it can trace cable assignment and cable state (2-wire), also can be used test physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. It can take place of cable tester.TELEPHONE LINE TEST - We only need the emitter to test the status of working of telephone lines, such as judging TIP or PING line and judging whether the telephone line is idle, ringing or off-hook. Rapidly find the target wire from among plenty of telephone wires, network wires, and all types of connected operating Ethernet switch /Router/PC.
ADDIDITIONAL EARPHONE - In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered.
PACKAGE CONTENT - 1 x Wire Tracker Emitter, 1 x Wire Tracker Receiver, 1x RJ45 Adapter , 1 x RJ11 Adapter1x Earphone1 x Alligator Clip Adapter1 x Toolkit1 x User Manual2 x 9V Battery.
PROFESSIONAL WIRE TRACKER - The line finder can quickly find the required line pairs among numerous ones. It's adaptable to RJ45 terminal & RJ11 terminal and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity (max currents:10mA- 30mA, and max voltage is 10V ). Besides, we offer two 9V laminated battery, which are included in the packaging of this item. Low battery indication with bright white LED flash light, included two 9V batteries.
Description
Product Features:
1.Use as Circuit Tester
Connect two alligator clips to the ends of the wire to check if resistance exists. If yes, the wire could be a short or open circuit. You can use the Wire Tracer function to locate the problem.
2.Use as a Wire Tracer
By sending a signal down the wire being tested, you can trace the wire with the detector probe. An audible tone will increase in volume as the probe gets closer to the wire. Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
3.Low Battery Capacity Indication
Move the function selector switch of the emitter to the SCANposition,when the cell voltage is below 6.0Vthe STATUS indicator and the VERIFY indicator of the emitter can flash at the same time.
Product Specification:
1.Power specs:DC,9V laminated battery( included)
2.Max. operating current:Emitter 10mA; Receiver30mA
3.Signal transmission format: Multi-frequency pulse
4Signal output level:8Vp-p
5.Signal transmission distance:.3km
Typical Applications:
Telecommunication network, line engineering and routine maintenance; Computer network line engineering;Other metal wire wiring works and maintenance work;
Scope of Applications:
Internet Cafe,Hotel network room,Electric power repair,Monitoring installation,Network line engineering
Package Includes:
1 * emitter,1 * receiver,1 * earphone,1 * RJ11 adapter,1 * RJ45 adapter,1 * alligator clip adapter,1 * toolkit,1 * user manual,2 * 9V battery
10. URCERI Wire Tracker Cable Tester RJ11 RJ45 Line Finder for Network Cable Collation, Telephone Line Test, Continuity Checking, Built-in Flashlight, Dark Gray and Yellow
Feature
Multi-function tool kit allows for both cable testing and wire trackingFinds a single RJ11, RJ45, or other metal wires with adapters within a group of cables
Determines the location of a short or breakage in non-powered wires
Detects shorts, open, and reverse wires; tests TIP/PING working status, positive/negative polarity
Built-in flashlight for use in dark areas; comes with a portable carrying bag
Description
Multi-functional Wire TrackerURCERI WT01 Wire Tracker is an essential tool for cable installers or anyone working in telecom or LAN environments. It allows you to track cable, find a short a breakage in non-powered wires, and detect shorts and open wires.
Easy to Use
Powered by included 9V batteries in the main tester and remote probe unit, the URCERI WT01 Wire Tracker can find an RJ11, RJ45 or other metal cables nestled within a group of cables. The built-in flashlight is handy for working in dark areas.
Intuitive Design
Use the newly-designed selection knob to find and test what you need in a single-hand operation. The new knob design is more intuitive compared to traditional rotary snob that might be hard to switch or turn.
Product Specifications:
Operating temperature: 0- 40C, maximum 80% relative humidity (non-condensing)
Storage temperature: -10 - 50C, maximum 80% relative humidity (non-condensing, battery NOT included)
Altitude: <2000m
Anti-explosion rating: IP40
Emitting signal distance: 300m
Battery transmitter: 6F22/9V
Battery receiver: 6F22/9V
Package Includes:
1x URCERI Wire Tracker Transmitter
1x URCERI Wire Tracker Receiver
1x Clip Adaptor Cable
1x RJ45 Adapter Cable
2x 6F22 Battery (9V)
1x Portable Carrying Bag
1x User Manual